Orthofix SFS User manual

SFSTM
S P I N A L F I X A T I O N S Y S T E M

Top-loading, pre-assembled
cross connector
Tapered heads conform
to anatomy
Patented locking screws
help avoid cross-threading
eduction Screws
SFSTM
S P I N A L F I X A T I O N S Y S T E M
The SFS SystemTM provides simple, reliable and comprehensive stabilization solutions for
spinal fixation. Its patented innovations enable surgeons to work efficiently with surety.
The pedicle screws provide a full 42° multi-axial range of motion that, in conjunction
with their uniquely tapered heads, are more accommodating to variables in patient
anatomy/pathology. This simplifies screw placement and reduces the need for rod
bending. Additionally, the fixation screw utilizes patented buttress threads that
minimize the potential for misalignment or cross-threading.

Innovative design increases axial
forces on the rod and minimizes the
potential for mis-alignment and
cross-threading of the set screw
Depth of Si es in Supplementary
Fixation Implants
SFS offers more solutions for the surgeon with a broad
selection of spacers, washers, staples, rod connectors and
reduction screws. Our 3.0mm to 5.5mm rod-to-rod
connectors adjoin SFS with the Ascent and Ascent LE
POCT (Posterior Occipital Cervical Thoracic) Systems, and
our 5.5mm to 5.5mm rod connectors create a contiguous
assembly with coaxial or parallel rod attachment.
• A wide array of standard and self-tapping pedicle screws
for added versatility
• A broad selection of reduction screws
Innovative Design Simplifies Procedures
The SFS design is elegant in its simplicity. The single closure
locking mechanism for all implants means more efficiency.
The multi-axial cross connectors provide multiple ranges
of motion (rotation, angulation, translation) yet require
only two lock-down screws to be secured. The cross
connectors also feature one-step-locking for additional
construct stability and a top loading design, so there’s
no need for patient repositioning.
• Advanced buttress thread design allows simple and
secure engagement of the set screw
• The Multi-Axial Cross-Connectors permit three planes
of manipulation
• Self-adjusting taper lock design in the multi-axial screw
creates a secure and strong locking mechanism
Offering a broad selection of implants to
meet surgical needs
Offering a broad selection of Reduction and
Pedicle Screws

The Spinal Fixation System‘s (SFS) pedicle screw and rod assembly offers an expansive, low-profile and
efficient spinal fixation system able to address the most complex spinal pathologies. Each component of
the system has been engineered to match the real conditions surgeons face during a procedure,
utilizing patented design advantages to benefit both surgeon and patient.
The Right Tools
Easy-to-use SFS pedicle screw system instruments and implants provide reliable, simple,
and secure spinal fixation.
• Color-coded for easy selection during procedures; ergonomic case/tray system
• Interchangeable ratcheting instrument handles
SIMPLE YET COMPREHENSIVE, RELIABLE AND
AMAZINGLY VERSATILE
A
B
C
A. Multi-Axial eduction Screw Driver
B. igid Hook Holder
C. Hook Pusher
D. Bone Tap
E. Mono-Axial eduction Screw Driver
E
D

55-1055 Trial Rod 90mm
55-1056 Trial Rod 200mm
55-1057 Trial Rod 450mm
DISPOSABLE INSTRUMENTS
57-0001 Reg Hook Holder, Straight
57-0003 Reg Hook Holder, Angled
57-0005 Lateral Hook Holder, Straight
57-0007 Lateral Hook Holder, Angled
57-0009 Rod Rocker
57-0020 Rigid Hook Holder
57-0022 Hook Linear Rod Reducer
57-0023 Hook Pusher
57-0025 Hook, Lateral Rod Reducer
57-0026 Lever, Hook Lateral Rod Reducer
57-0027 Set Screw Driver (Spline Drive)
57-0035 Transverse Process Elevator
57-0037 Pedicle Elevator
57-0040 Lamina Elevator
57-0045 Set Screw Driver/Holder
57-0047 Hook Set Screw Torque
T Handle/80 in lbs
57-0050 Combination Wrench, 5mm
57-0051 Rod Clamp
57-1015 Cross Conn Template 15 & 17mm
57-1019 Cross Conn Template 19 & 21mm
57-1023 Cross Conn Template 23 & 25mm
57-1090 Hook Instrument Case
HOOK INSTRUMENTS
57-0010 4.5mm Bone Tap w/35mm Stop
57-0011 3.5mm Bone Tap w/30mm Stop
57-0030 Bone Probe Curved 4.5mm
57-0032 Bone Probe Straight 4.5mm
57-0042 Bone Awl
55-1093 Ancillary Instrument Case #3,
Deformity
4.5 MM INSTRUMENTS
59-0100 Anti Splay Tool
59-0200 Scalloped Anti Splay Tool
59-0300 Reduction Screw Head Adjuster
59-0400 Tab Removal Tool
59-1035 Mono Axial Reduction Screw Driver
59-1037 Multi Axial Reduction Screw Driver
59-1090 SFS Reduction Screw Case
REDUCTION SCREW INSTRUMENTS
52-1035 F F Implant Inserter
55-1001 Bone Awl
55-1002 Bone Probe
55-1003 Curved Bone Probe
55-1004 Straight Sounder
55-1005 Curved Sounder
55-1006 X Ray Marker, Right
55-1007 X Ray Marker, Left
55-1025 5.5mm Bone Tap
55-1026 6.5mm Bone Tap
55-1027 7.5mm Bone Tap
55-1028 8.5mm Bone Tap
55-1030 Ratcheting Handle
55-1031 Ratcheting T Handle
55-1035 Mono Axial Screw Driver
55-1036 Multi Axial Screw Driver, Nut
55-1037 Multi Axial Screw Driver, Wing
55-1041 Pin Cutter
55-1042 Rod Bender
55-1043 Rod Holder
55-1044 Rocker
55-1045 Locking Pliers
55-1046 In Situ Rod Bender, Right
55-1047 In Situ Rod Bender, Left
55-1048 Linear Rod Reducer
55-1049 Rod Pusher
55-1050 Screw Sizing Template
55-1060 Set Screw Driver/Holder
55-1061 Set Screw Driver (w/ 55 1065)
55-1062 Set Screw Intermediate Driver
55-1063 Multi Axial Adjustment Driver
55-1064 Self Centering Set Screw Driver
(Only use with 55 1069)
55-1065 Deflection Beam Torque Wrench
(non ratchet)
55-1066 Set Screw Counter Torque Wrench
55-1067 Torque T Handle 120 in lbs
55-1068 Torque T Handle 100 in lbs
55-1069 Self Center Counter Torque Wrench
55-1070 Distractor
55-1071 Compressor
55-1072 Cross Connector Bender, Left
55-1073 Cross Connector Bender, Right
55-1089 Cross Connector Torque
Limiting Driver
55-1090 SFS Case #1
55-1091 SFS Case #2
55-1093 SFS Case #3
55-1095 Cross Conn. Template 30 & 35mm
55-1096 Cross Conn. Template 40 & 45mm
55-1097 Cross Conn. Template 50 & 55mm
55-1098 Cross Conn. Template 60 & 65mm
55-1099 Cross Conn. Template 70,
75 & 80mm
55-1150 Staple Holder/Impactor
INSTRUMENTS
INSTRUMENTATION & IMPLANTS
* Manufactured to order

55-6315 SFS Lateral Offset 15mm 55-6320 SFS Lateral Offset 20mm 55-6325 SFS Lateral Offset 25mm
LATERAL OFFSET CONNECTORS
56-2001 Set Screw
5.5 MM DIAMETER RODS & SET SCREW
54-2040 40mm Rod
54-2050 50mm Rod
54-2060 60mm Rod
54-2070 70mm Rod
54-2080 80mm Rod
54-2090* 90mm Rod
54-2110* 100mm Rod
LORDOSED SCREWS
55-2040 40mm Rod
55-2050 50mm Rod
55-2060 60mm Rod
55-2070 70mm Rod
55-2080 80mm Rod
55-2090 90mm Rod
55-2110 100mm Rod
55-2111 110mm Rod
55-2112 120mm Rod
55-2114 140mm Rod
55-2116 160mm Rod
55-2118 180mm Rod
55-2120 200mm Rod
55-2145 450mm Rod
STRAIGHT RODS
56-3425 4.5mm x 25mm
56-3430 4.5mm x 30mm
56-3435 4.5mm x 35mm
56-3440 4.5mm x 40mm
56-3445 4.5mm x 45mm
56-3450 4.5mm x 50mm
56-3455 4.5mm x 55mm
56-3460* 4.5mm x 60mm
56-3465* 4.5mm x 65mm
56-3470* 4.5mm x 70mm
56-3525 5.5mm x 25mm
56-3530 5.5mm x 30mm
56-3535 5.5mm x 35mm
56-3540 5.5mm x 40mm
56-3545 5.5mm x 45mm
56-3550 5.5mm x 50mm
56-3555 5.5mm x 55mm
56-3560* 5.5mm x 60mm
56-3565* 5.5mm x 65mm
56-3570* 5.5mm x 70mm
56-3575* 5.5mm x 75mm
56-3625 6.5mm x 25mm
56-3630 6.5mm x 30mm
56-3635 6.5mm x 35mm
56-3640 6.5mm x 40mm
56-3645 6.5mm x 45mm
56-3650 6.5mm x 50mm
56-3655 6.5mm x 55mm
56-3660 6.5mm x 60mm
56-3665* 6.5mm x 65mm
56-3670* 6.5mm x 70mm
56-3675* 6.5mm x 75mm
56-3680* 6.5mm x 80mm
56-3725 7.5mm x 25mm
56-3730 7.5mm x 30mm
56-3735 7.5mm x 35mm
56-3740 7.5mm x 40mm
56-3745 7.5mm x 45mm
56-3750 7.5mm x 50mm
56-3755 7.5mm x 55mm
56-3760 7.5mm x 60mm
56-3765* 7.5mm x 65mm
56-3770* 7.5mm x 70mm
56-3775* 7.5mm x 75mm
56-3780* 7.5mm x 80mm
56-3825 8.5mm x 25mm
56-3830 8.5mm x 30mm
56-3835 8.5mm x 35mm
56-3840 8.5mm x 40mm
56-3845 8.5mm x 45mm
56-3850 8.5mm x 50mm
56-3855 8.5mm x 55mm
56-3860 8.5mm x 60mm
56-3865* 8.5mm x 65mm
56-3870* 8.5mm x 70mm
56-3875* 8.5mm x 75mm
56-3880* 8.5mm x 80mm
STANDARD MULTI-AXIAL SCREW
58-3425 4.5mm x 25mm
58-3430 4.5mm x 30mm
58-3435 4.5mm x 35mm
58-3440 4.5mm x 40mm
58-3445 4.5mm x 45mm
58-3450 4.5mm x 50mm
58-3455 4.5mm x 55mm
58-3525 5.5mm x 25mm
58-3530 5.5mm x 30mm
58-3535 5.5mm x 35mm
58-3540 5.5mm x 40mm
58-3545 5.5mm x 45mm
58-3550 5.5mm x 50mm
58-3555 5.5mm x 55mm
58-3560* 5.5mm x 60mm
58-3625 6.5mm x 25mm
58-3630 6.5mm x 30mm
58-3635 6.5mm x 35mm
58-3640 6.5mm x 40mm
58-3645 6.5mm x 45mm
58-3650 6.5mm x 50mm
58-3655 6.5mm x 55mm
58-3660 6.5mm x 60mm
58-3665* 6.5mm x 65mm
58-3670* 6.5mm x 70mm
58-3675* 6.5mm x 75mm
58-3680* 6.5mm x 80mm
58-3725 7.5mm x 25mm
58-3730 7.5mm x 30mm
58-3735 7.5mm x 35mm
58-3740 7.5mm x 40mm
58-3745 7.5mm x 45mm
58-3750 7.5mm x 50mm
58-3755 7.5mm x 55mm
58-3760 7.5mm x 60mm
58-3765* 7.5mm x 65mm
58-3770* 7.5mm x 70mm
58-3775* 7.5mm x 75mm
58-3780* 7.5mm x 80mm
58-3825 8.5mm x 25mm
58-3830 8.5mm x 30mm
58-3835 8.5mm x 35mm
58-3840 8.5mm x 40mm
58-3845 8.5mm x 45mm
58-3850 8.5mm x 50mm
58-3855 8.5mm x 55mm
58-3860 8.5mm x 60mm
58-3865* 8.5mm x 65mm
58-3870* 8.5mm x 70mm
58-3875* 8.5mm x 75mm
58-3880* 8.5mm x 80mm
SELF-TAPPING MULTI-AXIAL SCREW

57-5315 15mm Fixed Cross Connector
57-5317 17mm Fixed Cross Connector
57-5319 19mm Fixed Cross Connector
57-5321 21mm Fixed Cross Connector
57-5323 23mm Fixed Cross Connector
57-5325 25mm Fixed Cross Connector
FIXED CROSS-CONNECTORS
55-5325 25mm
55-5330 30mm
55-5335 35mm
55-5340 40mm
55-5345 45mm
55-5350 50mm
55-5355 55mm
55-5360 60mm
55-5365 65mm
55-5370 70mm
55-5375 75mm
55-5380 80mm
MULI-AXIAL CROSS-CONNECTORS
57-2001 Set Screw
57-2145 450mm Rod with Hex Ends
57-2160 600mm Rod with Hex Ends
57-3010 Small Pedicle Hook
57-3011 Large Pedicle Hook
57-3020 Angled Left Hook
57-3021 Angled Right Hook
57-3030 Offset Left Hook
57-3031 Offset Right Hook
57-3040 Narrow Thoracic Laminar Hook
57-3041 Wide Thoracic Laminar Hook
57-3050 Narrow Lumbar Laminar Hook
57-3051 Wide Lumbar Laminar Hook
HOOK IMPLANTS
55-6003 SFS 3mm Spacer
55-6005 SFS 5mm Spacer
55-6102 SFS 2mm Washer
55-6104 SFS 4mm Washer
55-6106 SFS 6mm Washer
55-6202 SFS 2mm Staple
55-6204 SFS 4mm Staple
55-6206 SFS 6mm Staple
55-6420 5.5 to 5.5mm Axial Rod
Connector (Spline Drive)
65-6425 3.0 to 5.5mm Axial Rod Connector
52-6700 5.5 to 5.5mm Axial Rod Connector
52-6800 5.5 x 5.5mm Side By Side Front
Loading Rod Connector
55-6805 5.5 x 5.5mm Side By Side Top
Loading Rod Connector
65-6405 3.0 x 5.5mm Side by Side Front
Loading Rod Connector
DOMINO/SPACERS/WASHERS/STAPLES
55-4425 4.5mm x 25mm
55-4430 4.5mm x 30mm
55-4435 4.5mm x 35mm
55-4440 4.5mm x 40mm
55-4445 4.5mm x 45mm
55-4450 4.5mm x 50mm
55-4455 4.5mm x 55mm
55-4460* 4.5mm x 60mm
55-4465* 4.5mm x 65mm
55-4470* 4.5mm x 70mm
55-4525 5.5mm x 25mm
55-4530 5.5mm x 30mm
55-4535 5.5mm x 35mm
55-4540 5.5mm x 40mm
55-4545 5.5mm x 45mm
55-4550 5.5mm x 50mm
55-4555 5.5mm x 55mm
55-4560* 5.5mm x 60mm
55-4565* 5.5mm x 65mm
55-4570* 5.5mm x 70mm
55-4575* 5.5mm x 75mm
55-4625 6.5mm x 25mm
55-4630 6.5mm x 30mm
55-4635 6.5mm x 35mm
55-4640 6.5mm x 40mm
55-4645 6.5mm x 45mm
55-4650 6.5mm x 50mm
55-4655 6.5mm x 55mm
55-4660 6.5mm x 60mm
55-4665* 6.5mm x 65mm
55-4670* 6.5mm x 70mm
55-4675* 6.5mm x 75mm
55-4680* 6.5mm x 80mm
55-4725 7.5mm x 25mm
55-4730 7.5mm x 30mm
55-4735 7.5mm x 35mm
55-4740 7.5mm x 40mm
55-4745 7.5mm x 45mm
55-4750 7.5mm x 50mm
55-4755 7.5mm x 55mm
55-4760 7.5mm x 60mm
55-4765* 7.5mm x 65mm
55-4770* 7.5mm x 70mm
55-4775* 7.5mm x 75mm
55-4780* 7.5mm x 80mm
55-4825 8.5mm x 25mm
55-4830 8.5mm x 30mm
55-4835 8.5mm x 35mm
55-4840 8.5mm x 40mm
55-4845 8.5mm x 45mm
55-4850 8.5mm x 50mm
55-4855 8.5mm x 55mm
55-4860 8.5mm x 60mm
55-4865* 8.5mm x 65mm
55-4870* 8.5mm x 70mm
55-4875* 8.5mm x 75mm
55-4880* 8.5mm x 80mm
MONO-AXIAL SCREWS

1.888.298.5700
www.orthofix.com
SF-0902 PL-US © Orthofix Holding Inc. 4/2010
0086
Caution: Federal law (USA) restricts these devices to sale by or on the order of a physician. Products licensed
under US patents 5,466,237 and 5,474,555 and covered by Blackstone patents 6,540,748 and 6,524,310.
efer to the instructions for use supplied with product for specific information on indications for use,
contraindications, warnings, precautions, adverse reaction information, and sterilization.
59-3425 4.5mm x 25mm
59-3430 4.5mm x 30mm
59-3435 4.5mm x 35mm
59-3440 4.5mm x 40mm
59-3445 4.5mm x 45mm
59-3450 4.5mm x 50mm
59-3455 4.5mm x 55mm
59-3460* 4.5mm x 60mm
59-3465* 4.5mm x 65mm
59-3470* 4.5mm x 70mm
59-3525 5.5mm x 25mm
59-3530 5.5mm x 30mm
59-3535 5.5mm x 35mm
59-3540 5.5mm x 40mm
59-3545 5.5mm x 45mm
59-3550 5.5mm x 50mm
59-3555 5.5mm x 55mm
59-3560* 5.5mm x 60mm
59-3565* 5.5mm x 65mm
59-3570* 5.5mm x 70mm
59-3575* 5.5mm x 75mm
59-3625 6.5mm x 25mm
59-3630 6.5mm x 30mm
59-3635 6.5mm x 35mm
59-3640 6.5mm x 40mm
59-3645 6.5mm x 45mm
59-3650 6.5mm x 50mm
59-3655 6.5mm x 55mm
59-3660 6.5mm x 60mm
59-3665* 6.5mm x 65mm
59-3670* 6.5mm x 70mm
59-3675* 6.5mm x 75mm
59-3680* 6.5mm x 80mm
59-3725 7.5mm x 25mm
59-3730 7.5mm x 30mm
59-3735 7.5mm x 35mm
59-3740 7.5mm x 40mm
59-3745 7.5mm x 45mm
59-3750 7.5mm x 50mm
59-3755 7.5mm x 55mm
59-3760 7.5mm x 60mm
59-3765* 7.5mm x 65mm
59-3770* 7.5mm x 70mm
59-3775* 7.5mm x 75mm
59-3780* 7.5mm x 80mm
59-3825 8.5mm x 25mm
59-3830 8.5mm x 30mm
59-3835 8.5mm x 35mm
59-3840 8.5mm x 40mm
59-3845 8.5mm x 45mm
59-3850 8.5mm x 50mm
59-3855 8.5mm x 55mm
59-3860 8.5mm x 60mm
59-3865* 8.5mm x 65mm
59-3870* 8.5mm x 70mm
59-3875* 8.5mm x 75mm
59-3880* 8.5mm x 80mm
REDUCTION SCREWS - MULTI-AXIAL
59-4425 4.5mm x 25mm
59-4430 4.5mm x 30mm
59-4435 4.5mm x 35mm
59-4440 4.5mm x 40mm
59-4445 4.5mm x 45mm
59-4450 4.5mm x 50mm
59-4455 4.5mm x 55mm
59-4460* 4.5mm x 60mm
59-4465* 4.5mm x 65mm
59-4470* 4.5mm x 70mm
59-4525 5.5mm x 25mm
59-4530 5.5mm x 30mm
59-4535 5.5mm x 35mm
59-4540 5.5mm x 40mm
59-4545 5.5mm x 45mm
59-4550 5.5mm x 50mm
59-4555 5.5mm x 55mm
59-4560* 5.5mm x 60mm
59-4565* 5.5mm x 65mm
59-4570* 5.5mm x 70mm
59-4575* 5.5mm x 75mm
59-4625 6.5mm x 25mm
59-4630 6.5mm x 30mm
59-4640 6.5mm x 40mm
59-4645 6.5mm x 45mm
59-4650 6.5mm x 50mm
59-4655 6.5mm x 55mm
59-4660 6.5mm x 60mm
59-4665* 6.5mm x 65mm
59-4670* 6.5mm x 70mm
59-4675* 6.5mm x 75mm
59-4680* 6.5mm x 80mm
59-4725 7.5mm x 25mm
59-4730 7.5mm x 30mm
59-4735 7.5mm x 35mm
59-4740 7.5mm x 40mm
59-4745 7.5mm x 45mm
59-4750 7.5mm x 50mm
59-4755 7.5mm x 55mm
59-4760 7.5mm x 60mm
59-4765* 7.5mm x 65mm
59-4770* 7.5mm x 70mm
59-4775* 7.5mm x 75mm
59-4780* 7.5mm x 80mm
59-4825 8.5mm x 25mm
59-4830 8.5mm x 30mm
59-4835 8.5mm x 35mm
59-4840 8.5mm x 40mm
59-4845 8.5mm x 45mm
59-4850 8.5mm x 50mm
59-4855 8.5mm x 55mm
59-4860 8.5mm x 60mm
59-4865* 8.5mm x 65mm
59-4870* 8.5mm x 70mm
59-4875* 8.5mm x 75mm
59-4880* 8.5mm x 80mm
REDUCTION SCREWS - MONO-AXIAL