Osaki Pro Maestro User manual

Osaki Pro Maestro
Instruction Manual

Contents
Important safety instructions
Product parts
Before use
The controller instructions
Operation guide
After massage
Cleaning and maintenance
Q & A
Troubleshooting
Specification
……………………..……..........................................
………………………………………..……....................................................
……………………..…….......................................................................................
……………………..…….................................................
……………………..……........................................................................
……………………..……............................................................................
……………………..……...............................................
……………………..…….................................................................................................
……………………..……........................................................................
……………………..……................................................................................
4
9
11
15
17
23
24
25
26
28

110V, 60Hz
$Q\RQHZLWKVSLQDORUQHUYHFRQGLWLRQV
ual physical discomfort during usage of the chair immediately stop using the
re is abnormal discomfort after using the chair,contact your
physician and refrain from using the chair unless recommended by your physician.
ons
B
is replaceable it, has no
signs of damage or tears, to avoid from damaging the roller head
shock.
If not followed it may lead to electrical shock, electrical product failure and overheating causing a fire.
Make sure the power cable is firmly plugged into the outlet to prevent power surges, shorts, and
electrical shocks. Electrical shocks may cause overheating and fires.
Any person with a pacemaker of medical device
can not use this product. The chair produces an

sounds.
Do any cushions or obstructions between the backrest pad and the backrest. This may lead to
damaging the mechanism and personal injury.
When moving or handling the chair , be sure to grab from its frame and the recommended grabbing
.
When massaging the neck area, be attentive to the intensity of the massage to make sure
that it is not applying to much pressure which may aggravate neck muscles or nerves.
If unusual pain is experienced

·The following persons (even if they are physically healthy at present) should consult a
physician before using the product.
(1) Persons with muscular atrophy due to aging or below normal weight;
(2) Persons feeling lumbago (pain in the muscles and joints of the lower back) because of
bone or viscus problems;
(3) Persons receptive to suffering sprains or bruising easily;
(4)Persons with carsickness or seasickness (motion sickness) who received a heart
operation or another vascular operation;
If not addressed properly may lead to serious injury.
Before sitting on the product, make sure there is no foreign objects between any two parts
of the chair.
(Make sure there is no foreign objects on the back cover, the backrest, the seat surface, the
Lower Leg/Foot massage section or inside surface of the back cushion.)
Otherwise accidents,injuries,or product faults causedbyclamping of hands,feet, or other
Before sitting on the seat, make sure the massage wheels are in the retracted positions.
If you want to leave the seat during the massage, stop the product first.
articles.
When the Lower Leg/Foot massage section is not retracting after the massage, retract the
footrest by manually retracting it
Otherwise accidentsor injuriesmay happen.
Otherwise an electricshock or circuitfault may
Otherwise injuries may happen.
Otherwise marks and damage may be lefton the floor.
Otherwise
happen.
with the remotebutton.
When pulling out the power plug, do not pull from the power line but grab from the headof
the plug to prevent damage and injury.
Before moving the product, be sure the legrest and the backrest are in the default position.
The backrest up and the l egrest down.
When moving the product by pulley, moving dolly lay a mats on the floor to avoid markings
or damage to the floor. Do not roll the chair on engineered wood floors or soft woods.
Keep the safety lock key.
Keep children our of reach from children. Do not let children tamper withthe remote
control.
children may cause accidentsor suffer injuries by eatingit or playing withit.
Before moving the product by dolly or the wheels of th chair, remove the obstructions close
to it and in its path. If lifting use the recommended lifting points along the steel frame.
Otherwise accidentsor injuriesmay happen because of turn over of the product.
If any symptom such as skin inflammation, itching or swelling when using, stop the using
the product immediately and consult a physician.
Otherwise accidents or physical discomfort may occur.
Do not use the product and other devices at the same time, such as heating blankets, and
other electronic devices.
Otherwise
Otherwise
accidents or physical discomfort may happen.
Do not place yourhands, arms, feet and other partof the body e
x cept for the neck between
the roller massageheads. The rollers may s
q ueeze the body parts e x tremely tightly
causing injury.
Do not put the knees between the in calf massager. This may cause serious injury.
Do not fall asleep while using the product. Do not use the product after drinking alcohol.
If air in the filling the air bag on the seat is not completely discharged, do not stand or jump
on the seat or put things on it.
accidents or injuries may happen.

Do not put hands or feet between footrest and seat base.
Do not put hands or feet between footrest and side panel.
Do not put hands or feet between seat base and side panel.
Do not put hands or feet between upper and lower part of the footrest.
Do not put hands or feet in the gap of seat base.
Do not put pets on the massage chair.
Do not pull out the power plug or turn OFF the power switch suddenly during massage.
otherwise injuries may happen.
using again
plug
chair into a surge protector to protect the chair from shorting during outages.

If
t
he power plug is damage,it must be replaced by a special plug available from Osaki or an authorize
agent .

Pillow Shoulder
Bluetooth Speaker
Armrest
OSAKI Logo
LED
Controller
Side Panel
Footrest
Back Cushion
Seat Pad
Side Panel
Controller

2 Air bags
12 Air bags
6 Air bags

4.7”79.5”
25”
63”x31.5”
Before use
Make sure there is enough space to recline the chair and for the user to get in and out of the chair
freely. PLEASE MAKE SURE TO USE A MAT OR RUG UNDER CHAIR IF YOU PLACED ON TOP
OF A HARD SURFACE LIKE HARWOOD AND CERAMIC FLOORS.
equipment or by a window where sunlight can cause the synthetic leather fade, melt or crack.）
heating

Do not put hands or feet between footrest and seat base.
Do not put hands or feet between footrest and side panel.
Do not put hands or feet between seat base and side panel.
Do not put hands or feet between upper and lower part of the footrest.
Do not put hands or feet in the gap of seat base.
otherwise injuries may happen.
Inspect the power cord of dirt or dust that may
have collected. Be sure the cord is kept clean and
with NO visible damage.
Do not bend or twist the power cord any reason.
Do not place the power cable under heavy objects
such as the chair itself. Keep the power cord away
from any heating source such as the heater vents,
motors and anything that may generate heat.

Be sure the power cord is firmly and
completely inserted into the power outlet.
110-120
backrest in the retracted position, press
"ON" button to bring back to the default
position.

Inspect the synthetic leather portian in which
the massaging rollers travel along the backrest.
Be sure there is no damage or unusual ware.
Before use, raise the back cushion and check
whether fabrics lining pointeddout in the
figure are undamaged.
(Even if the fabric is slightly damaged,stop
the product immediately,pull out the power
plug and send notify the manufacturer for a
replacement cover.)
If the productis used when there is fabric damage,
you may get in jured or get an electricshock.

1. Power switch on the top of controller
ON /OFF button
Press this button to start massage chair.Touch any massage function icon to start
massage.
Press this button again to turn off the massage chair, massage chair will return to
its original position.
2. Touch screenφ
There are 6 functions in the middle of the screen for user to select.
Setting is on the top right corner.
The controller instructions
Power switch on the top of controller
ON /OFF button
Touch screen
The touch keys
AUTO

AUTO
3. The touch keys
Position:
1.User can adjust backrest/footrest incline/recline by touching the icon .
when the desire position is reached, touch the icon again to stop the adjustment.
2.The button for the legrest allows you to extend or retract the length of the legtest.
3. Z-G: Touch this icon to active the Zero gravity position,press the button again to return to
idle position.
4. Touch LED icon can controll the logo lamp under the side panels.
Note: Z-G icon is NOT controllable in the massage programs with angle adjustment.
AUTO: Once this key is touched,
the massage chair will start the
demo auto program，and the
screen will change to massage
page.
Reset: Once this key is touched,
massage chair will return to its
original possition，while the
massge function continue.
Position: Once this key is
touchedθthe screen will change
to the [Position] page.
Main page: When starting the
chair, touch this key can change
the screen between main page
and massage page.

1. Neck & Shoulder
Touch this icon，the screen will change to the page [Neck & Shoulder]
There are 4 auto massage programs, if 1 of 4 auto program is activated，chair will
automatically perform a shoulder hight scan.The screen will that the [Shoulder scanning]
is being conducted.
The roller will go to shoulder adjustment automatically，user can manually adjust the
shoulder hight position right after the scan is complete and just before the progam
initiates. There is a 3 sec. window to make the adjutment.
Operation guide

2. Lower back
Touch this icon，the screen will change to the page [Lower back]
There are 4 auto massage programs. Select 1 of 4 auto program to
start the preset program.
3. Auto
Touch this icon，the screen will change to the [Auto] page.
There are 8 auto massage programs. Select 1 of 8 auto programs to start your preset
programmed massage.

NOTE:
(1) 4D Intensity:
There are 8 different levels available for adjustment to suit various
massage strength.
In Auto programes, users can adjust 4D intensity instead of
Strength and Speed. Strength and Speed will be locked for better
massage experience.
(2) Air Intensity ：
There are 5 different levels available for adjustment.
4. Manual
Touch this icon，the screen will change to the [Manual] page .
There are 4 programs for different part massage areas of massage for the back.
User can select the program preferred，then the auto program will start.
Kneading/Tapping/Shiatsu has two kinds of massage techniques for selection.

NOTE:
(1) 4D Intensity:
There are 8 different levels for the 4D intensity.
In massage mode, the intensity will set to default.
(2) Intensity / strength / speed:
There are 5 different levels for adjustment.
(3) Upward / downward:
When pressing the [Spot] button, it will freeze the massage rollers
from moving up or down, concentrating the massage at that point.
In order to change the spot location simply press the up or down icon.
(4) Roller width:
The width of the massage can be adjusted for tapping, shiatsu, rolling.
Press the left and right arrow icons.
(5) Spot:
The spot massage allow user to select spot for any part on the back.
Touch the icon once to activate spot massage at the desired iocation.
Touch again to stop the function.
(6) Partial:
The partial massage allow user to select a region(1/4 of the back).
Touch the icon once to activate partial massage.
Touch again to stop the function.
5. Advance
When pressing [Advanced]，the screen will change to the [Advance] screen.
There are 4 advance programs to select from.
User can select the program preferred，then the program will start.