OTC 5082 User manual

Sheet No.
Issue Date:
© Bosch Automotive Service Solutions LLC
1 of 1
Rev. C, June 6, 2014
Form No. 525969
Parts List &
Operating Instructions
for: 5082
655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: [phone]
Tech. Serv.: [phone]
Fax: [phone]
Order Entry: [phone]
Fax: [phone]
International Sales: [phone]
Fax: [phone]
Wheel Tipper
SAFETY PRECAUTIONS
CAUTION: To prevent personal injury and damage to equipment,
•If the operator cannot read English, operating
instructions and safety precautions must be read
and discussed in the operator’s native language.
•Wear protective eyewear that meets the
requirements of ANSI Z87.1 and OSHA.
•To prevent injury, do not let go of the handle once the
wheel has started to tilt.
•Do not leave wheel unattended in an upright position.
•Use the wheel tipper for lifting wheels only.
Operating Instructions
To raise the wheel
1. Deatethetireandbreakthetirebead.
2. Withthetiremountingangeagainsttheoor,hookthewheeltipper
totherimofthewheelasshowninFigure1.
3. Standontheoorontheoppositesideofthewheelfromthewheel
tipper.
4. Placebothhandsonthegripendofthetool.
WARNING! To prevent injury, do not let go of the handle
once the wheel has started to tilt.
5. Slowlypullthehandleofthewheeltippertowardsyoutoraise
thewheeltoastandingposition.SeeFigures2and3.
6. Oncethewheelisstanding,removethewheeltipper.
To lower the wheel
1. Hookthewheeltippertotherimofthewheel.
2. Withbothhandsonthewheeltipper,pushonthehandleofthe
wheeltippertostartthewheelmovingtowardstheoor, then
slowlynishloweringthewheeltotheoor.
Figure 1
Figure 2
Figure 3
Mounting Flange
Wheel Tipper