OtterBox Defender Series User manual

1Unwrap the elastic band and fold the folio open.
2Grab the spine of the folio and slide to one side
until it releases.
3Peel away and remove the outer slipcover from
the shell.
4Separate the shell halves by locating the arrows
and releasing each snap along all four sides.
5Place your device into the bottom half of the shell.
6Place the shell top on the device and snap the
two case pieces together along all edges.
Defender Series
Folio Case

7Align the openings on the back of the slipcover
with the notches on the back of the bottom half of
the shell and wrap the slipcover around the shell.
8Press around all edges to ensure slipcover is engaged
in all grooves and notches for a secure fit.
9
Reattach the folio by placing the notches in the slots
and sliding to the side.
Note: if the pencil loop becomes detached during
the installation process, simply snap it back into place
before putting on the slipcover.