Otto HORSEN OTHOR1DOOA User manual

HORSEN 1 DOOR CUBE INSERT
ASSEMBLY INSTRUCTIONS
1/15
This design and instruction booklet is subject to copyright.
1 Carton
www.officeworks.com.au
For spare parts or hardware call [phone] or email [email protected]
OTHOR1DOOA / OTHOR1DOWE /
OTHOR1DOWN

2/15
NOTE
Please check you have all hardware before assembling.
If you are missing any hardware, please contact Kyvas on [phone]
or email [email protected]
Please ensure you have the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
Do not tighten screws before all screws are in the right place.
Do not use this product unless all bolts, screws and knobs are firmly secured.
Check that all bolts, screws and knobs are securely tightened at least
every 4 months.
WARNING
If parts are missing, broken, damaged or worn stop using the product until
all repairs are made using manufacturer authorised parts.
Keep children and animals away from the assembly area.
This furniture contains small parts that could cause choking if swallowed.
Keep all plastic wrapping materials away from babies and children to
avoid danger of suffocation.
This item is not for outdoor use – unless stated otherwise.
Failure to follow these warnings could result in serious injury.
DANGER
CHILDREN MUST BE SUPERVISED.
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
Tools Required
CAUTION:Do not use tools other than those required, as this can damage
your new item.
To view an assembly video, go to https://www.officeworks.com.au/
Search the product by item code or name:
Click on the icon to watch the video.
Spare Parts & Hardware
[phone]
Estimated Assemble Time: 20min
Customer Service
Contact Details
People Required General Advice
Assemble On A Clear Flat
Surface
One Person Is Required To
Safely Assemble The Item

Part Overview
3/15
Part List
1
Parts located in Carton - OTHOR1DOOA / OTHOR1DOWE / OTHOR1DOWN
X 1 pc X 1 pc
2
1
2

Hardware List
Hardware Pack located in Carton - OTHOR1DOOA / OTHOR1DOWE / OTHOR1DOWN
A
( 4 x 16 mm)
X 4pcs
X 12pcs
B
( 4 x 14 mm)
X 1pc
C
( 4 x 30 mm)
Other hardware located in Carton - OTHOR1DOOA / OTHOR1DOWE / OTHOR1DOWN
D
Handle
X 1pc
X 2pcs
E
Hinge
4/15
F
X 1pc
16mm
16mm
For missing hardware, please contact Kyvas on [phone] or
email [email protected]

Note: Before installing this item, please ensure the main cube unit is square.
To check this measure the opening as indicated and the A & B measurements
should be the same. If there is a difference greater than 2mm, please fix the
main cube unit before proceeding.
Assembly
Step 1
5/15
1 pc
F
16mm
F
16mm
F
AB

6/15
E
2 pcs
B
4 pcs
B
B
E
E
E
2
Step 2
Note: You can assemble the 1 Door Cube Insert by 2 different options.
Option 1
Page 7
Option 2
Page 10
DC
1 pc 1 pc
BB
BB
D
C

Step 3
7/15
1
1
1
Option 1

Step 4
8/15
A
Step 5
A
4 pcs
AA
AA
1

9/15
Step 6
B
8 pcs
BB
B
B
B
B
B
B
B
B
B
B
Your HORSEN 1 DOOR CUBE INSERT Option 1 is now complete and ready for use.
2

10/15
Step 7
Option 2
1
1
1