Otto TTDJ015 User manual

ASSEMBLY INSTRUCTION P1
TTDJ015
NOTE Please contact us intimeIf youfind any accessories
missing ordamaged inthe package, wewill send you the
corresponding accessories forfree.

please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because
the board is easy to break.
IMPORTANT !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
step of the instructions carefully.
ANTI-TOPPLE WARNING !
Try to find a partner to install
with you, which can speed up
the installation efficiency and
shorten the time.
IMPROVE EFFICIENCY !
In order to avoid scratching this
furnuture should be assembled
on a soft layer-could be a rug.
AVOID SCRATCHES!

ASSEMBLY INSTRUCTION P2
1
2
3
4
4
6
7
8
9
10
11
5
5
11

1 X 1 X 12 3 4
5 6 X 1 X 17
X 1 X 2
X 1
A B CD E
7*38mm
ASSEMBLY INSTRUCTION P3
x 16+2 x 16+2 x 12+2 x 20+2 x 2
X 18
X19
6*35mm 15*9mm 6*30mm
X1
10 X2
11
6*50mm6*22mm
Fx 2Gx 24+2 Hx 8+1 Ix 4+1 Jx 4+1
Kx 3L x 12+2
6*10mm
M4
Mx 1
4*25mm
Nx 4
30*12

ASSEMBLY INSTRUCTION P4
1
2
x4
AA
I
6*50mm
x4
C
x16A
6*35mm
6*30mm
11
5
I
A
C
4
4
11
5
80%