OULOO F32 User manual

ATTENTIONS
Battery and charging:
Onlychargeat0℃〜45℃,-20℃〜60℃discharge,Keepthebatterydry,Itisstrictlyforbidde
ntoput thebatteryinacidicandalkalineliquids,avoidrain,andkeepawayfromfire,heatandhighte
mperature environments.Itisstrictlyforbiddentoreversethepositiveandnegativepolesofthebat
tery,anditis strictlyforbiddentodamage,disassembleorinstallthebatteryorshort-circuitthebatt
ery.Pleaseusethe originalspecialchargerwhencharging,notmorethan6hours,andthechargingc
urrentdoesnotexceed 2A.Whennotinuseforalongtime,pleasekeepthebatteryinacoolanddrypl
ace,andchargethe batteryforfivehourseverymonth.Theusermustfollowtheinstructionsforuse
whencharging,otherwise theconsequenceswillbeatyourownrisk.Payattentiontothetypesanda
pplicablevoltagesofthe batteriesthatthechargercancharge.Mixeduseisstrictlyprohibited.Whe
ncharging,itshouldbeplaced inaventilatedenvironment,anditisstrictlyforbiddentochargeinar
esidentialbuilding,aclosedspaceor ahotsunandhightemperatureenvironment.Whencharging,
pluginthebatteryfirst,andthenaddthe utilitypower;whenfullycharged,cutofftheutilitypowerfi
rst,andthenunplugthebattery.Whenthegreen
lightison,thepowersupplyshouldbecutoffintime,anditisforbiddentoconnectthechargertotheA
C powersupplywithnoloadforalongtimewithoutcharging.Duringthechargingprocess,ifthein
dicator lightisabnormal,thereisapeculiarsmellorthecaseofthechargerisoverheated,thechargin
gshouldbe stoppedimmediately,andthechargershouldberepairedorreplaced.Duringtheusean
dstorageofthe charger,becarefultoavoidtheentryofforeignobjects,especiallytheinflowofwate
rorotherliquids,so astoavoidshortcircuitinsidethecharger.、Trynottocarrythechargerwiththe
bicycle.Ifyoureallyneed tocarryit,itshouldbeplacedinthetoolboxaftershockabsorption.Donot
disassembleorreplacethe accessoriesinthechargerbyyourself.
Cycling:
Donotuseituntilyoureadtheinstructionscarefullyandunderstandtheperformanc
eoftheproduct;do
notlendittopeoplewhocan'tmanipulatetheproductforriding.Beforeridingthebi
cycle,checkwhether
thebrakesareworking.Whenyoubrake,pleaseactivatetherearbrakefirstly,andth
enthefrontbrake.
Payattentiontothebraketightness.Ifthebrakeistooloose,useanAllenkeytotigh
tenit.Payattention
toincreasingthebrakingdistancewhenridinginrainorsnow.Suitableage:
Ridingbetween16and65yearsold.
Pleasebesuretowearasafetyhelmetwhenridingabicycle,followthetrafficrules,
anddonotdriveon motorizedlanesandroadswithmanypedestrians.Pleasecheckthe
tirepressurebeforeriding.The
recommendedtirepressureis35~40PSI.
Whenridingondownhillandnon-pavedroads,makesurethespeeddonotexceed15KM/h.
Whenusingthemotor,pleasebecarefulnottohititvigorouslyandkeeptherotatings
haftlubricated.
Itisnotallowedtoridewithmorethanthemaximumloadofthebody(themaximumloadis
120KG)
Afteruse,thebikecannotbeparkedinthebuildinghall,evacuationstairs,safetye
xits,andmustbe parkedcorrectlyinaccordancewiththesafetyrules.
One-handed riding is prohibited!

Responsibility Statement:
Afterriding,pleasestorethebicycleinaplacewithoutsunlightandrain,notinaresidentialbuilding;chec
kthe
motorandbrakefrequently;Regularlycheckallthescrewsofthebicycleandtheplacestobetightened,an
d
tightenthemregularly.
Recommendedtorque:(unit:kgf.cm)60-80forhorizontalscrews,175-200forverticalscrews,175-200
forseatcushionscrews,320-450forwheelscrews;
Boththefrontandrearwheelsofthebicycleshouldbeinthecenteroftheforkorframe;
Alwayscheckthetiresfornicks,cracksorexcessivewear.Theinnertubeandvalveshouldbe perpendicu
maintenance and care:
Thecompanyreservestherighttomodifyandinterprettheproductmodels,specificationsorrelated
informationmentionedinthismanual;thefunctionsofaspecificmodelmentionedinthismanualareonl
y applicabletothatspecificmodel;
Productmodelsmentionedinthismanual、Intheeventofanymodificationorchangeofspecifications
orrelatedinformation,Noadditionalnoticewillbegiven,thankyouforyourunderstanding;
Withoutthepriorwrittenpermissionofthecompany,thecontentsofthismanualmaynotbecopied,
modified,reproduced,transmittedorpublishedinanyform.Pleasereadthismanualcarefullybefore
usingtheproduct,andoperateinaccordancewiththemanual,otherwisethecompanywillnotbe
lartothehubandnotcrooked.Damagedorexcessivelyworntiresneedtobereplaced immediately,pleas
efindaprofessionaltechniciantoreplaceyourtire,ifyourtireisaccidentally puncturedandleaked,pleas
econtactaprofessionaltechnicianforrepairorreplacement.
responsibleforproductdamageorpersonalorpropertydamagecausedbyimproperuseormistakes.
(Model: F32) Parts identification
1.Dashboard
2.Handle bar
3.Brake lever
4.Front reflective
5.Height adjustable tube
6.Quick release lock of
height adjustment
7.Foldable stem
8.Quick release lock of
stem folding
9.Front light
10.Disc brake pad
11.Rims
12.Tire
13.Suspension fork
14.Disc brake
15.Quick release lock of
frame folding
16.Foldable pedal
17.Chain wheel
18.Battery pack
19.Chain
20.Rear Derailleur
21.Motor
22.Charging port
23.Quick release lock of
saddle adjustment
24.Tube under saddle
25.Saddle
Figure 1 (Whole vehicle diagram)

3. Power display: After the power is turned on, the dashboard lights up to display the power, and the
power is displayed in 5 grids, corresponding to high, medium and low power.
4. headlight:refer to Figure 3, Long “ ” press button headlights Power on/off.
5. start up: Power-assisted riding, short press after power on“ ” Adjust to 1st gear,Step on the
bicycle sprocket and start the motor to assist. If motor assistance is not required, turn off the power or
turn off the battery or set the meter to 0.
Function introduction:
1. Charging: Open the plastic cover of the charging hole on the right side of the frame and
connect the charger to start charging. When the battery is full and the charger indicator
turns from red to yellow-green, it means it is fully charged.
2.Power on: Referring to Figure 2, turn on the battery switch; refer to Figure “ ” 3,
Long press button Power on/off.
Figure 3 (Left handle bar)
Figure 1 (Charger port)
Figure 2 (Battery switch)

Product parameters
Outlook & Dimension
Performance parameters
Standard Editio
parameters n
bike material Aluminum alloy
Bicycle unfolded size 1730mm*570mm*1200mm
Bike Folding Dimensions 880mm*500mm*700mm
Bike hub size 20 inches
Package dimensions 960mm*380mm*770mm
Operating temperature -10~45 degrees
waterproof level IP54
Battery Type 18650Lithium-ion power
battery
gross weight / net weight 32.3kgs/26.7kgs
maximum load 120kg
top speed 25Km/h
travel distance ≦35 Km(pure electric riding)
Maximum climbing 25 angle
Bike hub form One-piece alloy wheel

Remarks:Electricity, load, tire pressure, road environment, chain and axle lubrication, etc. will affect the
maximum speed; the cruising range is: load 60kg, speed 15-25km/h, smooth and hardened road, from
fully charged to completely exhausted , obtained from uninterrupted testing; driving habits, temperature,
load, tire pressure, road environment and other factors will affect the cruising range.
Electrical Specifications
Battery type 18650 lithium ion power battery
Battery capacity 10AH
Battery rated voltage 48V
Motor rated power 350W
Motor operating mode Pedal+electric
Motor type 20 inch/high speed
gear/one wheel brushless
motor
Motor rated no-load speed 400 (+) (-)10r/min
Charger output 54.6V 2.0A
Charger input 100~240V 50/60Hz 3.0A
Undervoltage protection value 39V
Overcurrent protection value 15(+)(-)1A
charging time 4-5 hours
product Features
Meter display screen Multifunctional LCD screen
front lighting YES
Braking method Front disc brake Rear disc
Tire style Pneumatic tire
Tire specifications
Tires: 20×3.0
tire valve:20×3.0 inner tire valve is
AV
front fork bicycle shock absorber fork
speed 7S

Display Manual Control Panel Instructions
Overview:
Ⅲ Function Description:
1.Display function
Speed display, assist ratio display, power indicator, fault prompt, mileage display, voltage
display, single boot time, 6Km/h boost, cruise control, brake indicator, headlight display
2.Control, set function
Power switch control, headlight switch control, 6Km/h booster setting, cruise control setting, 3-speed
booster ratio setting, speed display switching, mileage and single-boot time and voltage display switching.
3. All contents of the display screen (full display within 1S after booting)

Display information
Motor malfunction brake tipspt
headlights power on notification
6. S866 Display Code Meaning:
status code
E00
E06
E07
E08
E09
E10
E11
state meaning
normal status
battery undervoltage
Motor failure
Handlebar failure
Controller failure
Communication reception failure
Communication sending failure
1. Voltage status level POWER
2. Multifunctional display area
Total mileage ODO, single mileage TRIP (unit: mile, km), single boot time TIME, battery voltage VOL
3.speed display area
AVG: average speed, MAX: maximum speed, SPEED: current speed; unit Mp/h, km/h
4. Bicycle assist gear adjustment
0-3 gear digital display and gear bar display
5. Bicycle status display area

Ⅳ Button function:
Below is button position
Introduction to the use of buttons
Key operation is divided into short press and long press,
Operation instructions:
Ⅱ、 Modify Power assisting cycling/Electric riding level
For example: Power-assisting cycling mode is activated now
1) Short press Power-assisting level + 1
2) Short press Power-assisting level - 1
Ⅲ 、Switch between speed display
In the power-on state, long press the and at the same time to
complete the display switching between the average speed, the maximum
speed and the instantaneous speed
Ⅳ 、Set/deactivate 6Km/h boost cruise, Cruising control, switch headlights
Ⅴ、 Choose display information
Short press on to choose the data displayed on multi-function area.
Ⅰ、Switch LCD display
Long press turn on or turn off.
1) When the bike is still, long press and hold the button to enter the 6KM/h boost cruise mode. Pinch any
brake to exit this mode
2) When the bike is running with electric power assist, press and hold the button to enter the cruise
control mode. Pinch any brake or turn the knob to exit cruise control mode
3) Long press on to turn on/off headlight
Note:
1. Due to the upgrade of the company's products, the display content of the product you get may be
different from the manual, but it will not affect your normal use.
2. The parameter settings of the instrument have been set at the factory. Please operate according to the
instructions in the manual, and do not change the original settings of the instrument. The company is not
responsible for any abnormal function or function damage caused by not following the instructions in the
manual.
3. Do not immerse the meter in water, or use a water jet to clean the meter. When cleaning, wipe with a
soft cloth dampened with water. Do not wipe with any cleaning agent.
4. Do not dispose of the meter or any other Ebike accessories as resident waste. Please comply with
local laws and regulations and dispose of or recycle Ebike accessories in an environmentally friendly
manner.
5.The electric bicycle is subject to the actual product received, the picture is for reference only, without
prior notice
Table of contents