Outback Cuisine User manual

Gas Barbecues
Assembly and Operating Instructions for
Outback® Cuisine and Outback® Connoisseur Gas Barbecues
EN (Europe)
WARNING
• For outdoor use only. Not for commercial use.
• Read instructions before using the appliance.Failure to follow instructions
could result in death, serious bodily injury, and/orproperty loss.
• Warning: accessible parts may be very hot. Keep young children away.
• Do not move the appliance during use.
• Turn off the gas supply atthe gas bottle after use.
• Any modification of the appliance, misuse, or failure to follow the instructions
may be dangerous and will invalidate your warranty. This does not affect your
statutory rights.
• Retain these instructions for future reference.
• Leak testannually, and whenever the gas bottle is removed or replaced.
• For Flare-up control please refer to the ‘OPERATION’ section of this manual.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. Ifodour continues,discontinue use and
contact your local dealer.
FOR YOUR SAFETY
1. Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
2. A gas bottle not connected for use shall not be
stored in the vicinity of this or any other
appliance.
0359
Photographs are not to scale.
Specifications subject to
change without prior notice.

2
Pre-Assembled Component
Quantity varies according to modelpurchased
 Appearance, size, and constructionmay differ according to modelpurchased
Parts List
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details onhardware, please see ‘Hardware Reference Diagram’.
CODE PART QTY Outback®
Cuisine Outback® Connoisseur
HOOD
A1 Hood Handle 1  
A2 Hood 1  
A3 Hinge Pin 2  
A4 Hinge Pin Clip 2  
A5 Heat Indicator with Nuts 1  
A6 Warming Basket 1  
BODY
B1 Barbecue Body 1  
B2 Burner 4 6
B3 Burner Clip 4 6
B4 Control Panel 1  
B5 Knob 4 6
B6 Drip Tray 1  
B7 Drip Pan 1  
B8 Foil Liner 1  
B9 Briquette Basket 2 
B10 Briquettes 2  
B11 Griddle 1 
B12 Grill 2 
TROLLEY
C1 Side Burner 1  
C2 Side Burner Grill 1  
C3 L/H Side Burner Shelf with Lid 1  
C4 Tool Hook 1  
C5 R/H Side Shelf 1  
C6 Towel Rail 1  
C7 Hose (if supplied) 
C8 L/H Panel 1  
C9 Divider 1 
C10 R/H Panel 1  
C11 Top Panel 1  
C12 Back Panel 1  
C13 Bottom Panel 1  
C14 L/H Door 1  
C15 R/HDoor 1  
C16 Door Handle 2  
C17 Magnet Strip 2  
C18 Caster 2  
C19 Lockable Caster 2  
C20 Heat Shield 1  
C21 Mounting Bracket 1  
C22 Ignition Assembly 1  
C23 Support 1 
ROTISSERIE
D1 Rotisserie Handle 1  
D2 Fork 2  
D3 Spit Rod 1  
D4 Motor 1  
D5 L/H Bracket 1  
D6 R/HBracket 1  
HARDWARE
E1 Screw, M6x15 28  
E2 Nut, M6 22  
E3 Bolt, M6x90 8  
E4 Washer 8  
E5 Spacer 8  
E6 Wing Nut, M6 8  
E7 Screw, M5x10 4  
E8 Nut, M5 4  

3
Outback® Cuisine Parts Diagrams
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details onhardware, please see ‘Hardware Reference Diagram’.
A6
A4
A3
A5
B11 B12
B9
B10
D1
C5
C2
D4
B6
B8
B7
B4
B5
C8 C10
C14
C19
A1
A2
B3
B1
C1
C3
C4 C6
C11
C7
C23
C12
C13
C17
C15
C16
C20
C21
C22
D3
D2
D5 D6
C18
B2

4
Outback® Connoisseur Parts Diagrams
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details onhardware, please see ‘Hardware Reference Diagram’.
A6
A4
A3
A5
B11 B12
B9
B10
D1
C5
C2
D4
B6
B8
B7
B4
B5
C8 C10
C7
C14
C19
A1
A2
B3B1
C1
C3
C4 C6
C11
C9
C12
C13
C17
C15
C16
C20
C21
C22
D3
D2
D5 D6
C18
B2

5
Hardware Reference Diagram
Specifications subject to change without prior notice.
E3, E4, E5, E6 E1, E2
E1 E7, E8

6
Assembly
IMPORTANT!
• Tools Required: Medium size flat blade or Phillips/Crosspoint screwdriver, adjustable spanner or metric
spanner set
• The assembly of this barbecue requires 2 people.
• Carefully unpack the trolleybox and remove all internal packaging beforecommencing assembly.
• Carefully unpack the body box and remove all internal packaging before commencing assembly. All
loose items including the grills/griddle,briquette baskets and warming basket must be removed from the
body.
• Whilst everycare is taken in the manufacture of this product, care must be taken during assemblyin
case sharp edges are present.
1
2
Attachthe L/H Panel (C8) to the Bottom Panel (C13) using the Screws (E1)and Nuts (E2).
Attachthe R/H Panel (C10)to the Bottom Panel (C13)using the Screws (E1) and Nuts (E2).
* A sticker on the
panels indicates the
position for easy
assembly.
L/H
L/H R/H

7
Attachthe Top Panel (C11) to the L/H (C8) and R/H (C10) Panels with the Screws (E1) and
Nuts (E2).
Cuisine Users: Attach the Support(C23) between the Top and Bottom Panels using the Screws (E1) and
Nuts (E2).
Connoiseur Users: Attach the Divider(C9) between the Top and Bottom Panels using the Screws (E1)
and Nuts (E2).
C9
L/H R/H
L/H R/H
4
3
C23
Cuisine Connoisseur

8
Attachthe Back Panel (C12) to the assembled portionof the cabinet using the Screws (E1).
Screwthe Casters (C18) into the L/H Panel and the Lockable Casters (C19) into the R/H
Panel.
L/H
R/H
L/H R/H
6
5

9
Remove the Screws from the L/HPanel. Attach the L/H Side Burner Shelf
(C3) to the L/H Panel by replacing the Screws.
Remove the Screws from the R/H Panel. Attach the R/H Side Shelf
(C5) to the R/H Panel by replacing the Screws.
8
7

10
Insert Spacers (E5) into holes in the sidewall of the bodyand turn 90 degrees to lock inplace.
Carefully lay the Barbecue Body (B1) onto the supports on the cabinet. WARNING: DO NOT RELEASE
THE BARBECUE BODY WHILE THE BARBECUE HAS NOT BEEN PROPERLY SEATED. THIS MAY
RESULT IN INJURY OR DAMAGE TO YOUR BARBECUE.
Attach the bodyby inserting the Bolt (E3) through the leg of the side panel and then through the Spacer
(E5) which has been previously inserted into the sidewall of the body. Place the Washer (E4) over the
bolt (E3) and protruding part of the Spacer (E5) and secure with the Wing Nut (E6). Repeat for all 8
bolts.
Connect the wires to the Ignition Assembly(C22)as shown on the next page.
10
9