CAUTION: To reduce the risk of electric shock, do not remove the
cover. No user serviceable parts inside. Refer to qualied personnel.
WARNING: To reduce the risk of re or electric shock, do not expose
this appliance to rain or moisture.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any openings. Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus that produce heat.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specied by the manufacturer.
Unplug this apparatus during lighting storms or when unused for long periods
of time.
Refer all servicing to qualied services personnel Servicing
is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
This device has no power switch. To disconnect this device from power supply,
the power cord must be disconnected.
The power supply and power cord for this apparatus is intended for indoor use only.
Only use the included A/C adaptor.
Damage Requiring Service Unplug the apparatus from the wall outlet
and refer servicing to qualied service personnel under the
following conditions:
»When the power-supply cord or plug is damaged.
»If liquid has been spilled, or objects have fallen into the apparatus.
»If the apparatus has been exposed to rain or water.
»If the apparatus does not operate normally by following the operating
instructions.
»Adjust only those controls that are covered by the operating instructions
as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualied technician to restore the
apparatus to its normal operation.
»If the apparatus has been dropped or damaged in any way.
»When the apparatus exhibits a distinct change in performance this
indicates a need for service.
Object and Liquid Entry Never push objects of any kind into the
apparatus through openings as they may touch dangerous voltage points
or shortout parts that could result in a fire or electric shock. The apparatus
shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases shall be placed on the apparatus. Don’t put candles or
other burning objects on top of this unit.
The lightning ash with arrowhead, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sucient
magnitude to constitute a risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
maintenance (servicing) instructions in the literature
accompanying the appliance.
Please Read First
WARNING: Important Safeguards
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential in-
stallation. This equipment generates and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more
should be maintained between this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended.
The antenna used for this transmitter must not be co-located in conjunction with
any other antenna or transmitter.
Outlaw Audio LLC Limited Warranty
This warranty protects the owner of the Outlaw Audio LLC (hereby
referred to as Outlaw Audio) Model BTR-100 Bluetooth Receiver (the
PRODUCT) for two (2) years from the date of purchase.
This warranty covers all defects in material and workmanship with the
following specic exceptions. These are:
Damage caused by improper installation or adjustment
Damage caused by accident, unreasonable use or neglect
Damage from failure to follow instructions contained in this
Owner’s Manual
Damage from the performance of repairs by someone not autho-
rized by Outlaw Audio
Any unit on which the serial number has been defaced, modied,
or removed
Damage occurring during shipment
Units which have been altered or modied in design, appearance
or construction
This warranty covers only the actual defects within the PRODUCT itself.
IT DOES NOT cover costs of installation in (or removal from) a xed in-
stallation, or normal set-up, claims based on any misrepresentation by
the seller, or performance variations resulting from installation related
circumstances such as signal quality, AC power or incompatibilities with
speakers and/or other system components.
During the warranty period, Outlaw Audio will, at its option, either
repair the defect, or replace the defective product, or the defective
parts, or components thereof at no charge to the owner for parts and
labor covered by this warranty. If necessary repairs are not covered by
this warranty, or if a unit is examined which is not in need of repair, you
will be charged for the repairs and/or the examination. If non-warrant-
ed repairs are needed, we will notify you of the estimated cost and ask
for your authorization to perform said repairs.
You must pay shipping charges incurred in getting your Product to
the factory. We will pay the return shipping charges if the repairs are
covered by the warranty. Please save the original shipping cartons as
the unit MUST be returned in the original carton and packing.
(Replacement cartons are available at a modest charge.)
If your product needs service, please call Outlaw Audio LLC at
866-OUTLAWS (688-5297) or 866-OUTLAWA (688-5292).
You will need to present the original bill of sale to establish the date of
purchase. In the event that the proof of purchase cannot be established
with the original receipt, the warranty period shall be determined
by the earliest date of manufacture shown on the unit, provided that
the serial number label has not been altered in any manner, or by our
records relating to that serial number.
In the event that you wish to return your Model BTR-100 back to us, for
any reason, please call to arrange for a Return Authorization Number.
This will insure that your problem is discussed with a service technician
who will determine if there is a quick solution to your problem.
Outlaw Audio shall not be liable for, in any way responsible for, any
incidental or consequential damages of any kind. Some states do not
allow limitations on how long an implied warranty lasts and/or do not
allow the exclusion of incidental or consequential damages, therefore,
the limitations and exclusions stated herein may not apply to you. This
warranty gives you specic legal rights; and you may also have other
rights which vary from state to state.
THERE ARE NO WARRANTIES GIVEN BY OUTLAW AUDIO WHICH EXTEND
BEYOND THE DESCRIPTION GIVEN HEREIN. ANY IMPLIED WARRANTIES
OF FITNESS FOR PURPOSE SOLD, MERCHANTIABILITY, DESCRIPTION,
QUALITY OR ANY OTHER MATTERS ARE LIMITED TO THE TERMS OF THE
EXPRESSED LIMITED WARRANTY STATED HEREIN.
Products are sold on the basis of specications applicable at the time of
sales. Outlaw Audio shall have no obligation to modify products once
they have been sold.
The specic terms of this warranty are applicable only in North America.
Model BTR-100
Bluetooth Receiver
Printed in China
www.outlawaudio.com
