
OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
2
SAFETY REGULATIONS
Please read this manual carefully and in its en-
tirety. It contains important information regarding
safety issues, including guidelines for general safe
use of rigging systems as well as advisories on gov-
ernment regulations and liability laws. The suspen-
sion of large, heavy objects in public places is subject
to numerous laws and regulations at the national/
federal, state/provincial, and local levels. The user
must assume the responsibility for making sure that
the use of any rigging system and its components in
any particular circumstance or venue conform to all
applicable laws and regulations in force at the time.
GENERAL SAFETY RULES
• Carefully read this manual in all its parts
• Respect the working load limits and maxi-
mum congurations of the elements and of any
third-party component (such as suspension
points, motors, rigging accessories, etc...)
• Do not incorporate any accessory not provided
by Outline; all damaged or defective components
must be replaced only by equivalent parts ap-
proved by Outline
• Ensure personnel health and safety, ensure that
no one is standing under the system during the
installation, ensure that all personnel involved in
the installation are equipped with personal safety
devices
• Always double check that the elements are cor-
rectly connected before suspending the system.
The rigging elements are easy to use, however the
installation shall be carried out only by qualied per-
sonnel that are familiar with the rigging techniques,
safety recommendations and with the instructions
described in this manual.
All mechanical components are subject to wear
and tear over prolonged use as well as corrosive
agents, impacts or inappropriate use. For this rea-
sons users have the responsibility to adopt and ad-
here to a schedule of inspections and maintenance.
Key components (screws, connecting pins, welded
points, rigging bars) must be inspected before every
use. Outline strongly recommends to carefully in-
spect the system components at least once a year,
reporting in a written document the date, the name
of the inspector, the points checked and any anom-
alies discovered.
DISPOSAL OF WASTE MATERIALS
Your product is designed and manufactured
with high quality materials and componen-
ts, which can be recycled and reused. When
this crossed-out wheeled bin symbol is attached to
a product, it means the product is covered by the
European Directive 2012/19/EU and subsequent
amendments. This means that the product must
NOT be disposed of with other household-type wa-
ste. It is the users’ responsibility to dispose of their
waste electrical and electronic equipment by han-
ding it over to an approved reprocessor. For more
information about where you can send your equi-
pment for recycling, please contact your local di-
stributor. The correct disposal of your old product
will help prevent potential negative consequences
for the environment and human health.
CONFORMITY AND WARRANTY
All the Outline electro-acoustic and electro-
nic devices are in conformity with the pro-
visions of EC/EU directives (as stated in our
CE declaration of conformity).
The CE declaration of conformity is attached to the
product warranty certicate and is shipped with
the product.