Outsunny 842-174 User manual

ASSEMBLY INSTRUCTION
INbzb006_UK_US
842-174
READ AND SAVE THIS INSTRUCTION FOR FUTURE USE
Square Steel Fire Pit 26”

26” SQ FIRE PIT (STEEL) 842-174 2
SAFETY WARNINGS
FOR OUTDOOR USE ONLY! Burning wood or charcoal indoors can kill you. It gives off
carbon monoxide, which has no odor.
NEVER LEAVE FIRE UNATTENDED!
DO NOT allow children or pets near the fire ring without supervision.
DO NOT touch sides of fire ring while in use.
NEVER burn in vehicles, tents or indoors. CARBON MONOXIDE HAZARD.
NEVER place a cover on the fire pit when in use. Ensure the fire ring’s mesh frame has
cooled before placing a cover over the fire ring.
When the fire pit is in use, the side mesh frame can reach extreme temperatures that can
cause serious injury to an unprotected hand. DO NOT handle when hot.
CAUTIONS:
•Burn only wood, charcoal, or fire logs in the fire pit.
•DO NOT use gasoline or kerosene to start the fire in your fire ring.
•DO NOT use this unit on a wood deck, long or dry grass and / or leaves, or on combustible
Surfaces.
•DO NOT attempt to move the fire pit while it is hot or in use.
•Place the fire pit at least 8 feet (2.4 meters) from walls or combustibles during use.
•Adequate fire extinguishing material should be readily available.
•Use heat-resistant gloves to handle hot tools.
•DO NOT place or use the fire pit under a canopy of trees.

26” SQ FIRE PIT (STEEL) 842-174 3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble
the product. Contact customer service for replacement parts.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly: M6 Wrench (Not Included) and Phillips Screwdriver (Not Included)
PACKAGE CONTENTS
PART DESCRIPTION QTY
A Base 1
B Bowl 1
C Cooking grill 1
D Poker Bracket Base 1
E Spark Screen 1
F Poker Bracket 1
H Poker 1
S1 M6x12mm bolt 8
S2 M6 nut 1

26” SQ FIRE PIT (STEEL) 842-174 4
ASSEMBLY INSTRUCTIONS
Step 1: Attach Fire bowl (B) to Base (A) using eight M6 x 12mm Bolts (S1).
Step 2: Insert the poker bracket (F) into the poker bracket base (D) and then through the hole in the
spark screen(E). Use the wrench (not included) to secure one M6 nut (S2) to the underside of
the spark screen(E).

26” SQ FIRE PIT (STEEL) 842-174 5
Step 3: Place the cooking grid (C) into fire bowl, and place the spark screen (E) onto fire bowl.
Step 4: Your fire pit is now ready for use. Please ensure the poker (H) is near the fire pit for use
anytime.