Outsunny 842-169 User manual

ASSEMBLY INSTRUCTION
INbzb002_UK
842-169
READ AND SAVE THIS INSTRUCTION FOR FUTURE USE
24” DEEP FIRE PIT

24” Deep Fire Pit 842-169 2
SAFETY WARNINGS AND PRECAUTIONS
Please read all instructions carefully and keep this manual safe for future reference.
Keep at least 6 feet away from all other articles during use.
This fire pit is intended for outdoor use only.
To be used to burn wood logs only. Do not burn coal, leaves, or other combustible
materials in the fire pit.
Not to be used by children. Keep children and pets away from the fire pit.
CAUTION! Please be careful when handling the fire pit, as the pit will be hot. Do not touch
the hot fire bowl with bare hands.
Never leave the burning fire pit unattended, and always extinguish the fire completely
before leaving the fire pit.
Do not use near flammable or combustible objects or materials.
When the fire pit is in use, the handle on the mesh screen can reach extreme temperatures
that can cause serious injury and burns to an unprotected hand. Use a poker or an
appropriate heat resistant glove or pad when handling.
Check local fire regulations and municipal by-laws for safe and legal use.
Some parts may have sharp edges. Wear protective gloves if necessary.
The metal will become extremely hot during use and will retain the heat for some time after
use. Do not touch the metal or try to move the unit whilst hot.
Keep children away from the unit whilst in use until the fire is extinguished and the metal
has cooled.
Do not use on wooden surfaces, decks, grass, near walls or flammable articles, or under
overhead coverings.
Only use the fuel type(s) specified in the instructions. Using other fuel types is dangerous
and may result in an injury.
Do not overload the unit with fuel.

24” Deep Fire Pit 842-169 3
PREPARATION
Before beginning assembly of the product, ensure all parts are present. Compare parts with package
contents list and hardware contents below. If any part is missing or damaged, do not attempt to
assemble the product. Return the product to the point of purchase.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly: M8 Wrench (Included) and Phillips Screwdriver (Not Included)
FIRE PIT PARTS LIST
No. PARTS Qty
ALegs 3
DBowl 1
KThreaded rod (screws) 3
EMesh Wire Cover 1
HPoker 1
FCooking grill 1
HARDWARE LIST
No.Hardware Qty
S6 Flat washer 6
S2 M8 Nuts 6

24” Deep Fire Pit 842-169 4
Step-By-Step Assembly Instructions:
Step 1: Attach the Legs (A) into the Bowl (D) by using flat washer (S6) and M8 nuts (S2), then
tighten all nuts with a wrench.
Step 2: Insert threaded rods (K) into edge of fire bowl (D) as illustrated and hand tighten, then put
Mesh Wire Cover (E) on the fire bowl.

24” Deep Fire Pit 842-169 5
Step 3: Put the cooking grill (F) and spark screen (E) on the Threaded rod, then place poker (H)
beside fire pit for use as needed, now you’re ready to start up your first fire in your new fire
pit!