Outsunny 842-079 User manual

INSTRUCTION MANUAL 842-079
Please check all packing material carefully before discarding, as
some parts may be encased in the packing material.
Part List
Part List
Description
Qty.
Drawings
A
Mesh Lid
1
B
Log Grate
1
C
Fire Bowl
1
D1
Upper Support Ring-
8 Holes
1
D2
Upper Support Ring-
4Holes
1
E
Legs
4
F
Poker
1
G
Allen Wrench
1
H
Lid Ring
1
I
Bolt
12+1
J
Nut
8+1
Tool required: Allen Wrench (provided)
Special Warnings
➢Check local bylaws before using the fire pit.
➢This fire pit is intended for Outdoor Use Only! DO NOT use on wooden decks.
➢This fire pit is intended to burn Wood Logs Only! DO NOT burn coal, leaves or other
combustible materials in the fire pit.
➢NOT for use by children. Keep children and pets away from the fire pit.
➢Fire pit is hot, use with caution. NEVER touch hot fire pit with bare hands.
➢NEVER leave burning fire pit unattended and always extinguish fire completely
before leaving the fire pit.
➢Keep the fire pit at least 20 feet away from any flammable surface or dwelling.
➢DO NOT use near flammable or combustible objects or materials.
➢Only CHROMED PLATED COOKING GRID is intended for cooking.LOG GRATE is NOT
intended for cooking and SHOULD NOT be used for this purpose.
➢Always use gloves and protective glasses when loading the fire pit or extinguishing
the fire.
➢Have a fire extinguisher available near the fire pit in case of emergency.
Operation Instructions
➢Place wood logs on grate and light with match. DO NOT overload logs.
➢Please use Poker (provided) when handling.
➢We do not recommend pouring water over the fire unless necessary. The fire
should be allowed to expire on its own.
Care and Maintenance
This fire pit is a quality-built product and is made to last for many years. The frame
structure of this unit is made of powder-coated steel extrusion and should resist rusting
under normal use. Should rusting occur, we suggest using a steel brush on the affected
area followed by a spray coating of high temperature anti-rust paint. For additional rust
proofing of the bowl, grate and mesh lid we recommend that a coat of high temperature
primer is applied before use.

Assembly Instruction:
Estimated Assembly Time:15 Minutes
DO NOT over tighten the hardware.
Step 1) Attach Legs (E) to Upper
Support Ring-8 Holes (D1) by
using Bolts (I) and Nut (J).Do not
fully tighten at this point.
Step 2) Attach and tighten
Bottom Support Ring-4 Holes
(D2) to each Legs (E) by using
Bolts( I ).
Now fully tighten all bolts.
Step 3) Assemble the Mesh Lid(A)
by using Lid Ring(H) Place the Fire
Bowl (C) on the assembled base
and put the Log Grate (B) in the
fire bowl.Attach the Mesh Lid on
the Fire Bowl.
WARNING!
•The use of alcohol, prescription or non-prescription drugs may impair
the ability to properly assemble or safely operate this fire pit.
•When using this fire pit, exercise the same precautions you would
with any open fire.
•Do not use this fire pit for indoor heating. Toxic carbon monoxide
fumes can accumulate and cause asphyxiation or death.