OUXI V8 User manual
V8 Electric Bike Assembly
How To Assemble V8 Electric Bike
Getting hold of your first electric bike can be exciting and nerve-cracking as well. But don’t get
intimidated though, because our OUXI V8 electric bike comes with 95% assembled. From start to
finish, complete assembly of a OUXI V8 eBike at home will take less than an hour with our step-by-
step instructions and assembly video. Plus a team of dedicated bike experts available to offer
personal assistance 24/7.
How Easy It Is to Assemble Your OUXI V8 E-Bike
In order to ship the V8 e-Bike as efficiently as possible, components such as the front wheel and
handlebars are partially disassembled before crating. Since these removed parts have a direct
bearing on a vehicle’s reliability and safety.
* The following assembly steps are only a general guide to assemble your V8 electric bike. We
recommend you consult a certified, reputable bike mechanic to assist in the repair or replacing parts
of your V8 bike.
Let’s Get Started
Before we officially start putting the V8 ebike together, make sure the box come in complete and un-
damaged. OUXI provide all the bike tools and accesorries needed to assemble the V8 bike for
immediate riding.
What’s in the box? - OUXI V8
V8 Electric Bike
Handlebar
Manual(s)
Handlebar holder
Disc Brake
Charger (54.6V 2A)
Front Wheel Axis
Pedals (marked left & right)
Bike Pump
Battery Keys (two, identical with number)
Front Fender
Assembly Tool kit (Allen wrench M3 –M6, Wrench
12-15, Scket wrench 8-10)
Front Wheel
Please recycle packaging materials especially cardboard and foam (all #6 EPS foam).
How To Assemble Your V8 fatbike?
V8 electric bike assembly includes just a few super easy steps. It always helpful to find and read the
owner’s manual.
#1 Insert Front Wheel
Install disc brake on the front wheel; Insert the skewer through the front wheel axle from the side of
brake disc, secure it with the 12-14 wrenches.
Note: 1. Place small parts on the axle according to the sequence in picture; 2. Inflate tires to
recommended PSI. (Marked on the tire).
#2 Install Pedals & Fender
Insert the pedal ( L for Left; R for Right ) into its position, and tighten them with the 13-15 wrench;
Install front fender with M5 Allen wrench and socket wrench to secure it.
#3 Attach Handlebar
Loose the trim cover with M5 Allen wrench, install the handle holder, there should be no gaps or
shakes before really attaching the handlebar. Secure your handlebar and adjust the handlebar & fork
to fit your riding position.
Go Ride!
Press and hold the M button on the controller until the display appears and you’re ready to hit the
road!
If you’re still feeling out of your depth or like you may physically need a hand, contact a local bike
shop or email to support@ouxibike.com.
Advice Before Test Riding OUXI V8 Bike
1. Check all control cables, throttle cable must not binding in any steering position.
2. Fully charge your battery before the first ride, it usually takes 5-7 hours to fully charge your
V8 electric bicycle.
3. Adjust the brake caliper slightly if you feel the disc brake rub on the rotor.
4. Make sure V8 bike tires are inflated and verify the disc brakes are working properly,
adequate, smooth stopping power, no drag.
5. Put on your helmet and you’re ready to ride!
Ouxi V8 Mountain Bike
•750W Avg. Motor, Peak 1000W
•Range 25-45 miles
•5-Speed Mode, 20-30 Mph
•48V 15Ah Removable Battery –720Wh
•20*4 Inch Fat Tires
•Shimano 7-Speed Derailleur
•Full Suspension
