Ovation TRUECOLOR 336M User manual

0
TRUECOLOR 336M
User Manual
Please read these operating instructions carefully to familiarize yourself with the basic
operating instructions of this unit. These instructions contain important information
regarding the use and maintenance of the unit. Please keep this manual with the unit for
future reference.
Warning:to prevent or reduce the risk of electrical shock or fire, do not expose this unit
to rain or moisture. Never look directly into laser beam. Use of controls, adjustments, or

1
procedures other than those specified herein may result in hazardous radiation exposure.
Caution:
1.There are no user service parts inside this unit. Don’t attempt any repairs yourself.
Please turn to qualified service personnel for repairs.
2. Be sure the local power outlet matches the required voltage of this unit.
3. Disconnect from main power before making any connection.
4. Always be sure to mount this unit in an area which will allow proper ventilation.
5. This unit is intended for indoor use only.
6. During long periods of non-use, disconnect the main power.
7. Always replace with the exact same type lamp and fuse. Disconnect the unit from the
main power and allow the unit the ample time to cool before attempting to replace the
lamps and fuse.
8.Use normal glass cleaner or a soft cloth to wipe down the unit casing. Always be sure to
dry all the parts completely before plugging the unit back in.
Operations:
1. LED Display
Graphic sections:
A. Menu
B. UP

2
C. Down
D. Enter
A B C D
Notes:
1.In the main menu, press the MENU key to select the main menu items you can choose
from top to bottom. In the submenu,press MENU key to be returned to the previous menu,
press ENTER ket to next menu. When the display flashes will be able to press on (UP)
key and under the (DOWN) key to modify the parameters; When the menu is displayed,
you can press the (DOWN) (UP) key select menu items;When released any key, will save
the show state and parameter values antomatically.
2.When receiving an external signal (MAST, is set to YES), if have DMX signal input, the
signal indicator will light,the fixture can be controlled by the DMX Signal.
CH
FUNCTION
Type of Control
CH1
General dimming
0：off
1-255dimmer
CH2
strobe
0:off
1-79：Brighten fast,black fast
80-159：Brighten slow,black fast
160-239：Brighten fast,black slow
240-255：strobe fast
CH3
RED
0：off
1-255dimming
CH4
GREEM
0：off
1-255dimming
CH5
BLUE
0：off
1-255dimming
CH6
CT
2800K----6500K
CH7
Fixing color
Color mixing

3
CH8
dimming
0：off
1~32：Red from small to big brightness
33~65：Red light stay the same,Green from small to big brightness
66~95：Green light stay the same,Red from brightness to black
96~127：Green light stay the same,Blue from small to big brightness
128~160：Blue light stay the same,Green from brightness to black
161~192：Blue light stay the same,Red from small to big brightness
193~224：Red & Blue light stay the same,
Green from small to big brightness
225~255：Red,Green & Blue light stay the same
CH9
color macro
0~9：off
10~63：Red &Blue color macro
64~127：Red & Green color macro
128~191：Blue & Green color macro
192~255：R、G、Bcolor macro
CH10
Function choice
0—60：DMX 7CH；61－－120：Fast change；121—180：slow
change，extremely fast change；181—255：fast change，slow
change，extremely fast change；
CH11
Function speed
From slow to fast
2. Operation Modes:
(1) DMX 512 protocol
Addressing
The LED DISPLAY on the rear side of the base allows you to assign the DMX fixture
address, which is defined as the first channel from which the item will respond to the
controller. If you set, for example, the address to channel 1, the item will use the channel 1
to 7 for control. Please, be sure that you don’t have any overlapping channels in order to
control each item correctly and independently from any other fixture on the DMX data link.
If two, three or more items are addressed similarly, they will work similarly. At DMX mode
you can choose the address from 1 to 512.After you connect the item to the mains, the
item starts running.

4
DMX Controlling:
After having addressed all items, you may now start operating these via your lighting
controller. After switching on, the item will automatically detect whether DMX 512 data is
received or not.
(2) Sound active
Press the Menu button, till SOUD shows in the led display, confirm by the the button
ENTER,the item will run to the beat of music.
(3) Auto
Press the Menu button, till CG01、CJ01、CP01 or DEMO shows in the led display,confirm
by the button ENTER,then the item will run as the program.
(4) Synchronization & master /slave mode
Take one item and set the item at sound active, or auto as above, then get other items
and press the button MENU, till A001 shows in the led display, confirm by the button of
ENTER, then connect the items to the item at auto/sound active already set by DMX
cables, disconnect the items from DMX controller, the items will wok simultaneously, the
item at auto/sound active as master, the others as slave.
TECHNICAL SPECIFICATIONS
Power supply: AC 90-240V,50/60Hz
Power consumption: 150W
DMX Channels: 11CHs
DMX-512-connection: 3-pin XLR
Light source: 36*3W LEDs 3 in 1
Color temperature:2800K-8000K
Housing: Die-cast Aluminum housing, IP20

5
LEDs’ Life: 60,000-100,000hrs
Operation modes: DMX512/Stand alone/Master-Slave/Sound activated
Dimming: 0-100% 16 Bit linear dimming
Beam angle: 25°
Packing Size: 295*295*285MM
GW: 4.8KG
Please note: Every information is subject to change without prior notice.