Ovela OVWESLEYWWA User manual

WESLEY WARDROBE
OVWESLEYWWA & OVWESLEYWNA

TOPPLING FURNITURE WARNING:
• Furniture with included restraints must be permanently fixed to the wall to prevent
accidental toppling, serious injury or death.
• Please seek professional advice if you are in doubt of what fixing hardware to use.
• Regularly check that anchors are securely maintained.
• Stability of tall items may be affected by thick carpets or uneven floors.
• Caution! For your safety when attaching the anchor fixings, please note the
following: Check any electrical wires or plumbing inside the wall before drilling any
holes (if you are unsure, please seek professional advice from a qualified
tradesperson).
SAFETY & WARNINGS

Parts
Hardware
AFasteners (x52 Sets)
BDrawer slides (x8 Sets)
CScrews (x32)
COMPONENTS

(A) Fasteners
(B) Drawer slides:
The Drawer sidles (B) are comprised of two parts:
• (a) Internal runner
• (b) Housing
Eccentric wheel
Connecting rod
Internal runner (a)
OVERVIEW
Housing (b)

Step 1:
Use 4 sets of the fasteners (A) to secure the drawer left panel (9), drawer right panel (10) and
drawer back panel (11) together.
Step 2:
Insert the drawer bottom (12) into the drawer frame.
ASSEMBLY

Step 3:
Use 4 sets of the fasteners (A) to secure drawer front panel (8) to the drawer frame.
Step 4:
• Use the 4 screws (C) to attach the internal runners (a) to each side of the drawer
frame.
• Repeat steps 1-4 to assemble the 3 remaining drawers.

Step 5:
Use 12 sets of the fasteners (A) to secure the 3 shelves (4) to the wardrobe left and right
panels (1)(2).

Step 6:
Use 4 sets of the fasteners (A) to secure the wardrobe base
(5)
to the assembled frame.

Step 7:
• Use item (7) to join the 2 wardrobe rear panels (6) together.
• Slide the connected rear panels (6) into the assembled wardrobe frame.
Note: If only one side of the rear panels has a finish/colour, ensure that side is
facing inwards.

Step 8:
• Use 4 sets of the fasteners (A) to attach the wardrobe top (3) to the assembled
wardrobe frame.
• Use 16 screws (C) to attach 8 of the drawer housings (b) to the wardrobe frame.

Step 9:
Install the drawers assembled in step 4 into the wardrobe. The wardrobe is complete.

Wall brackets (x2)
Screws (x2)
Flat washers (x4)
Wall screws (x2)
Wall anchors (x2)
ANTI-TOPPLING KIT
WARNING: Furniture with included restraints must be permanently fixed to
the wall to prevent accidental toppling, serious injury or death.

Step 1:
• Move furniture into its final position to mark the location of the wall brackets.
• Move the furniture away from the wall so the wall brackets can be attached using
the supplied x2 wall anchors, x2 wall screws and x2 flat washers.
Step 2:
Attach the wall brackets to the wardrobe using the x2 screws and x2 flat washers.
INSTALLATION

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com.