Ovela OVSB3PCDOWA User manual

SEBASTIAN 3PCS DINING
SET
OVSB3PCDOWA, OVSB3PCDWBA

ATable leg frame
(x2)
BTable side rail
(x2)
CBench leg frame
(x4)
DBench side rail
(x4)
E Tabletop (x1) FBenchtop (x2)
Hardware
aM6 48mm screw
(x10)
bM6 35mm screw
(x20)
cM6 15mm screw
(x24) dAllen key (x1)
COMPONENTS

Step 1: Using the Allen key (d), secure M6 48mm screws (a) and M6 35mm screws (b) to
attach the table leg frames (A) to the table side rails (B) together. This will create the table
base assembly.
aM6 48mm screw (x4) cM6 15mm screw (x8)
ASSEMBLY

Step 2: Place the tabletop (E) on top of the table base assembly. Using the Allen key (d),
insert and tighten M6 48mm screws (a) to secure the tabletop (E) in place.
aM6 48mm screw (x6)
This completes the assembly of the table.

Step 3: To assemble the benches, use the Allen key (d) to insert and tighten M6 35mm
screws (b) and M6 15mm screws (c) to attach two bench leg frames (C) and two bench side
rails (D) together. This will create a bench base assembly.
Repeat this process using the two remaining bench leg frames (C) and bench side rails (D)
so you have two bench base assemblies.
bM6 35mm screw (x8) cM6 15mm screw (x16)
x2

Step 4: Place a benchtop (F) on top of one of the bench base assemblies. Using the Allen
key (d), insert and tighten M6 35mm screws (b) to secure the benchtop (F) in place.
Repeat this process with the remaining benchtop (F) and bench base assembly.
bM6 35mm screw (x6)
This completes the assembly of the benches.
x2

Assembly complete!

NOTES