Ovela MALLOW ENTERTAINMENT UNIT User manual

MALLOW ENTERTAINMENT
UNIT
OVMALLOWEUA

Important Information:
•Please read the entire manual carefully before starting to assemble and/or using this
product. Follow the manual thoroughly and keep it for further reference.
•Two people are required for this assembly.
SAFETY & WARNINGS
WARNING: The screw supplied together with the anti-toppling bracket
is to be used only for fixing the anti-topple bracket to the furniture. Some
products must be fixed directly to the wall (without bracket) and for
these no screws are included. In addition to this, you will need to choose
a screw or fitting which is suitable for securing the bracket to the kind of
walls you have. If you are unsure about what type of screw to use
contact your local hardware store.

①
1400 x 400 x 25mm
x1
⑩
185 x 85 x 50mm
x4
②
1400 x 385 x 15mm
x1
⑪
400 x 293 x 15mm
x1
③
385 x 280 x 15mm
x1
⑫
400 x 293 x 15mm
x1
④
370 x 280 x 15mm
x1
⑬
595 x 160 x 15mm
x1
⑤
580 x 370 x 15mm
x1
⑭
340 x 118 x 12mm
x1
⑥
370 x 280 x 15mm
x1
⑮
533 x 118 x 12mm
x1
⑦
385 x 280 x 15mm
x1
⑯
340 x 118 x 12mm
x1
⑧
1380 x 290 x 4mm
x1
⑰
543 x 338 x 4mm
x1
⑨
1350 x 30 x 15mm
x1
COMPONENTS

Hardware:
A340mm (x2)
BM6x12mm (x16)
CM5x40mm (x4)
DM6x45mm (x12)
EΦ15x12mm (x12)
FΦ8x30mm (x20)
GΦ5x38mm (x8)
HM6x27mm (x4)
IΦ12x10mm (x4)
JΦ4x35mm (x4)
K15x13x10mm (x4) LΦ3.5x20mm (x4) MΦ35/FK0mm (x4) NM4x14mm (x16)
O212x26x17mm
(x3)
PΦ4x18mm (x6)
QΦ3.5x12mm (x8)
R(x2)
SM4x12mm (x4)
TΦ10mm (x6)
U4mm (x1)
V3mm (x1)
WΦ21mm (x12)
Additional tools required:
Phillips head screwdriver Flat head screwdriver Mallet
•Electric drill may be required to create holes in wall for secure mounting.
•Do not use an electric drill for tightening screws on the cabinet during
assembly.

Step 1:
FΦ8x30mm (x20)
ASSEMBLY

Step 2:
DM6x45mm (x12)

Step 3:
A340mm (x2)

Step 4:
QΦ3.5x12mm (x4)

Step 5:
EΦ15x12mm (x4)

Step 6:
EΦ15x12mm (x8)

Step 7:

Step 8:
GΦ5x38mm (x8)
V3mm (x1)

Step 9:
CM5x40mm (x4)

Step 10:
BM6x12mm (x16)
U4mm (x1)

Step 11:
K15x13x10mm (x4)
LΦ3.5x20mm (x4)

Step 12:
R(x2)
SM4x12mm (x4)
TΦ10mm (x4)

Step 13:
WΦ21mm (x8)

Step 14:
MΦ35/FK0mm
(x4)
NM4x14mm
(x8)
O212x26x17mm
(x2)
PΦ4x18mm
(x4)

Step 15:
NM4x14mm (x8)