Ovela OVBAYSISTSA User manual

BAYSIDE SIDE TABLE
(SMOKE)
OVBAYSISTSA

• Do not use any power tools during the assembly of this product.
• Do not exceed the weight limit of 10kg on each of the tabletops.
SAFETY & WARNINGS

1 Glass Tabletop (x2)
2 Support Ring (x2)
3 Leg (x4)
A Allen Key
B M6x22mm
Bolt (x8)
CM6x10mm
Bolt (x8)
DØ10mm
Bumper (x8)
EØ16mm
Spacer (x8)
COMPONENTS

Step 1:
• Attach three legs (3) to the two support rings (2) ensuring you place a spacer (E) in
between the legs and support rings.
• Secure the legs in place using six M6x25mm bolts (B) and six M6x10mm bolts (C) as
shown below.
AAllen Key
BBolt (x6)
CBolt (x6)
ESpacer (x6)
ASSEMBLY

Step 2:
Place four bumpers (D) onto the lower support ring (2) and then gently place the glass
tabletop (1) on top.
DBumper (x4)

Step 3:
• Attach the remaining leg (3) to the two support rings (2) ensuring you place a spacer (E) in
between the leg and each support ring.
• Secure the leg in place using two M6x25mm bolts (B) and two M6x10mm bolts (C) as
shown below.
Note: Tighten the two M6x25mm bolts (B) to approximately 80%. Do not fully tighten at
this stage.
AAllen Key
BBolt (x2)
CBolt (x2)
ESpacer (x2)
80%
B(x2)

Step 4:
• Place four bumpers (D) onto the upper support ring (2) and then gently place the glass
tabletop (1) on top of them.
• Fully tighten all the M6x25mm bolts (B).
Dx 4
100%
B(x8)

Step 5:
Complete!

NOTES