Overdrive KR-TUTRBK User manual

2
10°~30°
1-21-1
Protective foam pads x 4
Rubber strap x 6
Safety strap x 1
Clean trunk/hatch and rear of car
before installation.
Instruction
Universal Trunk Mounted Bike Rack
Model: KR-TUTRBK ( 3 Bike Capacity )
■Thank you for purchasing Overdrive trunk bike rack, please confirm that all parts are included
in the package.
■ If there is anything missing or defective, please contact us at [email protected]
■1-1 Install the bike carrier on the trunk with hubs opened. The arm should be 10° to 30° degrees up.
■ 1-2 Turn the hub lever clockwise until the hub interlocks.
■Install six hooks on a structurally sound trunk lid and tighten all six straps both before and after mounting
bikes on the rack.

3
4
2
3
1
5
Alternate direction of
bikes when loading.
■Use provided protective foam pads to prevent scratches.
■To secure the bicycle, make a loop around main frame with the safety strap and pass it through
bicycle tires. Pass the safety strap through the buckle and pull firmly to properly secure the bicycles.
Caution: Always retighten the straps after mounting the bikes!
■Load your bicycle on bike holders, then secure the bicycle with rubber straps.
Thank you for your purchase. At Overdrive, we stand by the quality and design of our Bike Rack products.
Our Limited Lifetime Warranty covers a wide variety of mishaps and performance guarantees. If you have
further questions about our Limited Lifetime Warranty or need any support, you can start a conversation
with us at [email protected]