Oypla GARDEN 3096 User manual

Page 1
Manual Version: v1.0
Model Code: 3096
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3096
Contents
1Front Cover
-
2Safety
Instructions
-
2Warning
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
5 Back Cover
End
Wooden Cold
Frame House

Page 2
Manual Version: v1.0
Model Code: 3096
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2Warning
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
5 Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
This product contains small parts that
could be a choking hazard if swallowed.
Keep these items away from children.
Make sure all fastenings are tightly in
place and that everything is in order
before using the product. This should be
checked periodically by an adult.
Do not carry out alterations or
modifications to this product.
Clean only with a damp cloth. Do not use
strong industrial cleaning substances or
abrasive materials.
Do not discard any of the packaging until
you have checked that you have all of
the parts and fittings required.
Keep away from fire.
If product is damaged or has any defects,
please contact cserv[email protected]
This product is intended for outdoor use
only.
This product is not a toy, and is only to
be used for its designated purpose.
Leaving the product exposed to weather,
especially direct sun and rain, will speed
the weathering process. This can be
slowed by removing the product from
these conditions.
Keep fingers, loose clothing, hair and
jewellery away when assembling the
product. Pinch points can cause injury.
Use the correct fixings as indicated. Do
not tighten any of the nuts until the unit
is completely assembled, then finish by
tightening all the nuts. All nuts must be
tightened before use.
⚠This product contains small parts that
could be a choking hazard if swallowed.
Keep these away from children!
⚠Watch for pinch points! Keep fingers,
loose clothing, hair and jewellery away
during assembly of the product. Pinch points
can cause personal injury.
Warnings

Page 3
Manual Version: v1.0
Model Code: 3096
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact [email protected]
-Please be aware that you will be referring to this parts list throughout the assembly
process.
2
Contents
1Front Cover
-
2Safety
Instructions
-
2Warning
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
5 Back Cover
End
Assembly Instructions
1
Assemble the back, front and side frames (A, B, C1, C2) using the
Hscrews provided (8 X 3x40mm). Please see the diagram above
to help you.
2
2

Page 4
Manual Version: v1.0
Model Code: 3096
Oypla.com LLP / www.oypla.com
2
Contents
1Front Cover
-
2Safety
Instructions
-
2Warning
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
5 Back Cover
End
3
F
H (3x20mm)
Next assemble the roof/lid panel (D) to the frame built in step 1.
Ensuring the hinges (D) attach to the back panel (A). Secure these
in place with part Iscrews (4 X 2.5x10mm). Please see the
diagram above to help you.
Lastly, attach the lid support arms (E) to either side panel (C1, C2)
by using the large H screws (2 X 3x20mm) which are left. Secure
these into the lid panel (D), before using the wing nuts to fully
attach the support arm (E) to the frame. Again, please see the
diagram above for guidance if required.

Page 5
Manual Version: v1.0
Model Code: 3096
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2Warning
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
5 Back Cover
End