OYPLA Home 3436 User manual

User Manual
USER MANUAL Model No: 3436
4” 100mm Workbench Clamp

•This product is not a toy, and is only to be used for its designated purpose.
•Never carry out any alterations or modifications to this product.
•This product is intended for indoor use only.
•Keep fingers, hair, loose clothing and jewellery away when closing the clamp to
avoid injury and/or property damage.
•Do not overtighten as this may cause damage to the item inside of the clamp.
•This product is not intended for use by persons (including children) with reduced
physical, sensory and mental capacities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
product by persons responsible for their safety.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
•If the product is damaged or has any defects, please contact cs[email protected]
How to Install:
Place the clamp onto a workbench, ensuring that is is in line with the edge of the
workbench. After this, drill two screws into the holes found on either side of the clamp.
Before using, make sure that the clamp is secure and won’t come loose.
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
Please retain a copy of all instructions for future consultation.
USER MANUAL Model No: 3436