Oypla 3900 User manual

User Manual
USER MANUAL Model No: 3900
Basketball Net
Post

This product is not a toy, and is only to be used for its designated purpose.
Do not discard any of the packaging until you have checked that you have all parts
and fittings required.
Ensure the product is safely and correctly assembled, maintained and used.
This product contains small parts which could be a choking hazard if swallowed.
Keep these items away from children.
Never carry out any alterations or modifications to this product.
This product is intended for outdoor use only.
After filling the base platform with a weighted substance, ensure that the plug is in
correctly. Do not overfill or it will block the plug hole.
Do not hang off the metal ring, or pull the net post. Doing so, will cause the
basketball net post to fall down and could possibly break the product or injure you
and/or others.
Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials, as these will damage the product.
An adult should asses the area that the basketball net will be erected, to ensure
there are no hazards.
If the product is damaged or has any defects, please contact [email protected]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 3900

Assembly Instructions
Parts List:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the below parts, please contact Oypla customer services:
[email protected]om
1. To build the first part of this assembly you
will need;
The Bottom Pole (3)
Wheels (6)
Base (9)
Axle (10)
Align one of the Wheels (6) into the slots on the
Base (2). Using the help of another person take
the Bottom Pole (3) and place into the front of
the Base.
Thread the Axle (10) through the holes; to
the Wheel and through the Bottom Pole
and through to the second Wheel.
USER MANUAL Model No: 3900

USER MANUAL Model No:
USER MANUAL Model No: 3900
2. Take both Supports (4) and align the poles up with
those on the base, secure the four holes on the base
using (D) Bolts.
Then secure to the Bottom Pole (3) using (B) Bolts
tightening to secure.
3. With a person holding the structure fill the base with
either water or sand, to give the structure stability.
4. Take the Centre Pole (2) and slot over
the Bottom Pole (3), ensuring the screw
poles are aligned.
Secure into place using the 2 (A) bolts, tighten to
secure.

Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
5. To assemble the Backboard and Hoop.
Place the plate of the Top
Pole (1) on the back of the
Backboard (5) and then place
the plate of the Hoop (7) into
the front slot on the
Backboard.
Secure all three into place using
the 4 Small Hex Bolts (C), tighten
to secure.
NOTE: Ensure the Backboard is
between the two metal parts to
help with stability.
6. Take the Net (8) and hook over the loops.
Now take the Top Pole assembly and slot onto the Centre
Pole, align the holes on the Top Pole with those on the
Centre Pole and insert the 2 Tension Knobs, tighten to
secure into place.
The height can be adjusted using the Tension Knobs (E) by
loosening and adjusting the height of the Top Pole,
retighten when sufficient height is achieved.
Caution: Only an adult should adjust the height.
Min height –1.7m
Max height –2.1m
USER MANUAL Model No: 3900