Oypla 4136 User manual

User Manual
USER MANUAL Model No: 4136
Weight Bench

•Make sure all fastenings are tightly in place and that everything is in order before
using the product, this should be periodically checked by an adult.
•Do not discard any of the packaging until you have checked that you have all of
the parts and fittings required.
•Use the correct fixings as indicated. Do not tighten any of the nuts until the unit is
completely assembled, then finish by tightening all nuts. All nuts must be
tightened before use.
•This product is not a toy, and is used for its designated purpose only.
•This product contains small parts that could be a choking hazard if swallowed.
Keep these items away from children.
•Clean only with a damp cloth, do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
•Only use this product on stable, level and dry ground.
•Children should be supervised to ensure they do not play with the product.
•To prevent accidents and health issues, consult a doctor before use if you have
any underlying health problems or are taking any medication which affects your
heart rate, blood pressure or cholesterol.
•Warm up 5 to 10 minutes before each workout and cool down for 5 to 10 minutes.
•Most exercise equipment is not recommended for small children. Children should
not use the bench without adult supervision.
•Do not carry out alterations or modifications to this product.
•If the product is damaged or has any defects, please contact [email protected]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 4136
PLEASE DO NOT EXCEED THE 200KG LOAD CAPACITY.
(USER AND WEIGHTS COMBINED)

Assembly Instructions
Parts List:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the below parts, please contact Oypla customer services:
[email protected]om
USER MANUAL Model No: 4136

1. Attach the wheels (10) to the rear base (3)
with the M8x45 bolt, washer and nut (15).
2. Attach the rear end cap (9) to the rear base and
attach the rear base to the main frame (1) with the
M8x20 bolt, washer and nut (14).
4. Attach the adjustment support (5) to the backrest
beam (4).
3. Attach the front end cap (8) to the front base (2) and
attach the front base to the main frame with the M8x90
bolt, washer and nut (16).
7. Attach the backrest cushion (6) to the
backrest beam with four M8x40 bolts and
washers (13).
USER MANUAL Model No: 4136USER MANUAL Model No: 4136
5. Attach the two back rest beams to the main frame
with the M10x135 bolt, washer and nut (17).
6. Attach the seat (7) to the main frame with the
four M6x16 bolts and washers (12).
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
8. To fold the bench, remove the pin (11) from
the main frame and then fold the rear base
and main frame.