Oypla 4102 User manual

Bird Feeding Station
User Manual
USER MANUAL Model No: 4102

Make sure all fastenings are tightly in place and that everything is in order before using
the product. This should be checked periodically by an adult.
This product is intended for outdoor use only.
This product is not a toy, and is only to be used for its designated purpose.
Do not carry out alterations or modifications to this product.
Clean only with a damp cloth. Do not use strong industrial cleaning substances.
Leaving the product outside exposed to weather, especially direct sun and rain, will speed
the weathering process. This can be slowed by removing the product from these direct
conditions.
Only use this product on stable and level ground.
Ensure the product is secure in the ground to avoid injury.
Fill the feeders before attaching to the bird feeding station.
Do not discard of any packaging until you have checked that you have all of the
parts and fittings required.
If the product is damaged or has any defects, please contact [email protected]
USER MANUAL Model No: 4102
Safety Instructions
Notice: Please read all instructions carefully before using this product.

Operating Instructions
Parts List:
Top Hook
Section
1pcs
Base Pole
1pcs
Connector
Pole
2pcs
Hook
2pcs
Mesh Tray
1pcs
Glass Tray
1pcs
Firstly, add the hook onto one of the connectors. Then add the mesh tray and glass
tray to the other connectors. You will then be able to join the two connectors
together. After this you can add the top hook section onto the top of the
connectors that has the two hooks on it and it should then look like the diagram
below. Finally, you will need to add this section to the base pole which will then
allow you to secure the bird feeder into the ground.
Please retain a copy of all instructions for future
consultation.
USER MANUAL Model No: 4102