Oypla 4578 User manual

User Manual
USER MANUAL Model No: 4578
Hamster Cage

Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
Do not discard any of the packaging until you have checked that you have all of
the parts and fittings required.
Do not carry out alterations or modifications to this product.
This product is not a toy and is only to be used for its designated purpose.
Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as there is a chance of damaging the product.
This product is for domestic use only.
Only use this product on stable, level and dry ground.
If the product is damaged or has any defects, please contact cs[email protected]
Ensure the cage is always placed out of direct sunlight and away from direct heat
sources such as radiators.
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 4578

Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 4578
Assembly Instructions
Assemble the main wire cage by simply ‘locking’ the four sides together by
ensuring the vertical end bars of the end panels are securely pulled into the wire
looks on the front and back panels.
Fit the uppermost of the two platforms using three of the connectors (for ease,
clip ladder to the platform first). The ideal height is approximately 11 ‘spaces’
down from the top of the cage.
Fit the second platform in the same manner, ideally 4 ‘spaces’ up from the
bottom.
Place the assembled house and running wheel in the base and then place the cage
top onto the base, ensuring all four sides sit correctly in the top groove. Secure the
two wire clips. Twist lock the wheel into your desired position.
Attach the bottle holder and then slide in the filled bottle –completely filling the
bottle and very gently squeezing it helps to prevent any drip.