Oypla 4586 User manual

Page 1
Manual Version: v1.0
Model Code: 4586
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 4586
Contents
1Front Cover
-
2Safety
Instructions
-
2Warning
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
4 Back Cover
End
Hedgehog House

Page 2
Manual Version: v1.0
Model Code: 4586
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2Warning
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
4 Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
Never carry out any alterations or
modifications to this product.
This product is not a toy, and is only
to be used for its designated
purpose.
Keep fingers, loose clothing, and hair
away when assembling the product
and folding the lid.
Make sure all fastenings are tightly in
place and that everything is in order
before using the product. This should
be checked periodically by an adult.
This product contains small parts that
could be a choking hazard if
swallowed. Keep these items away
from children.
This product is intended for outdoor
use only.
Leaving the product outside exposed
to weather, especially direct sun, rain
and salt air, will speed the
weathering process. This can be
slowed by removing the product
from these conditions or covering it
with a suitable cover.
Clean only with a damp cloth. Do not
use strong industrial cleaning
substances or abrasive materials as
these will damage the product.
If the product is damaged or has any
defects, please contact
[email protected]om.
⚠This product contains small parts
which may be a choking hazard. Keep
these parts away from children.
Warnings

Page 3
Manual Version: v1.0
Model Code: 4586
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact [email protected]
-Please be aware that you will be referring to this parts list throughout the assembly
process.
Contents
1Front Cover
-
2Safety
Instructions
-
2Warning
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
4 Back Cover
End
Assembly Instructions

Page 4
Manual Version: v1.0
Model Code: 4586
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2Warning
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
4 Back Cover
End
1) To start, you’ll need parts 1, 2 and 3. Using 2 Ascrews, simply connect the taller
side of part 2to the right side of part 1. Once done, repeat with part 3on the left
side of part 1. Please see step 1 images on the previous page to help. Now as seen
on the step 1 image, attach part 6 to part 1just above the door entrance. Use the
2 Bscrews to secure this in place. Next, place the already built section on top of
part 4. Using the 2 metal connectors which are pre attached and 2 Cscrews,
securely fasten each part together. Please see image of step 1 for guidance.
2) For step 2, start by putting part 5into position seen on the step 2 image. Once
the pre-drilled holes align, secure using the 4 remaining part Ascrews. Now as
with on step 1 use 2 Cscrews to complete the connecting of part 4(base) to the
product.
3) For this step simply slide part 8into its slot on the inside of the hut. Please see
step 3 image for assistance.
4) Lastly, place the hut roof (part 7) on top of the product. This roof does not
securely attach to allow for easy cleaning, feeding and general access to the hut.