Oypla Tortoise Hutch User manual

Page 1
Manual Version: v1.0
Model Code: 3035
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3035
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Back Cover
End
Tortoise Hutch

Page 2
Manual Version: v1.0
Model Code: 3035
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•Never carry out any alterations or
modifications to this product.
•This product is not a toy, and is only
to be used for its designated
purpose.
•This product is intended for outdoor
use only.
•Keep fingers, loose clothing, and hair
away when assembling the product
and folding the lid.
•Make sure all fastenings are tightly in
place and that everything is in order
before using the product. This should
be checked periodically by an adult.
•This product contains small parts that
could be a choking hazard if
swallowed. Keep these items away
from children.
•If a pet is inside of the product, sure
that the entrance panels are secured
into place by the entrance latches
before leaving the product on its
own. Do not leave the pet alone
inside the product as the weather
conditions may change.
•Leaving the product outside exposed
to weather, especially direct sun, rain
and salt air, will speed the
weathering process. This can be
slowed by removing the product
from these conditions or covering it
with a suitable cover.
•Clean only with a damp cloth. Do not
use strong industrial cleaning
substances or abrasive materials as
these will damage the product.
•If the product is damaged or has any
defects, please contact
[email protected]om.
⚠This product contains small parts.
Please ensure these parts are kept away
from children at all times. Failure to do
so might result in children choking.
⚠Keep fingers, loose clothing and
hair away during the assembly of this
product and when opening/closing the
lid. Failure to do so may result in
personal injury.
Warnings

Page 3
Manual Version: v1.0
Model Code: 3035
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact
[email protected]
-Please be aware that you will be referring to this parts list throughout the
assembly process.
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Back Cover
End
Assembly Instructions
2

Page 4
Manual Version: v1.0
Model Code: 3035
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Back Cover
End
Step 1) Attach A & B to C using P1x4. Then attached D to
part A & B using P1x4.
Step 2) Slide both part Es into the centre of the hutch so
that they are resting on the bars on the inside.
Step 3) Using part P2x4 attach part F to the back of the
hutch using hinges attached to it. Then fix part P3 to part F
and the side of the hutch as shown in picture, using the
remaining screws Part P2x6.