OzMask BTR 1004 User manual

1
www.ozmask.com
24-Minute Miracle • Bright Skin for 24 hours!
User’s Manual
1300 000 998 [e-mail]
www.ozmask.com

2www.ozmask.com
Product Introduction........................................................................................................................................4
Product Principle ................................................................................................................................................ 5
Product Composition....................................................................................................................................... 7
User’s Manual [details].....................................................................................................................................8
User’s Manual [operation manual]....................................................................................................... 10
Applications (Dermatology Clinic) .................................................................................................. ..... 12
Certification ...........................................................................................................................................................13
Warranty.................................................................................................................................................................. 14
TABLE OF CONTENTS

3
www.ozmask.com
With the 4 sources of the light effect of OzMask
and synergistic effect of light and heat!
IMPROVE SKIN WITH LIGHT!
Thank you for purchasing beauty rock.
To ensure a more efficient and safe use of this product, please read and understand the precautions before
using it.
Improving freckles, skin problem, skin elasticity,
wrinkle, and aging process set free women problems!

PRODUCT INTRODUCTION
This product is a new concept of PDTT(Photo Dynamic Thermo Therapy) esthetic
device that combines PDT(Photo Dynamic Therapy) and Thermo Therapy
It is a new-concept skin beauty device which is a collaboration of the detox and the
effects of cell regeneration of far infrared rays in addition to the healing powers for
each color wavelength of BRY-G using LEDs.
PDT
[Photo Dynamic Therapy]
+
Thermo Therapy
II
PDTT
[Photo Dynamic Thermo
Therapy]
You can enjoy the Ozmask at home
without spending any extra time or
the treatment process for treatment.
4www.ozmask.com

5
www.ozmask.com
24-Minute Miracle • Bright Skin for 24 hours!
BLUE 455nm I Depth Of Penetration ~ 1 mm
• Inhibition of sebum production • Prevention of wound infection
• Sterilization of bacteria in acne • Calming skin problems
GREEN 530nm I Depth Of Penetration ~ 1 mm
Helps in elastin production
• Improving skin problems • Calming skin problems
Yellow 580nm I Depth Of Penetration ~6mm
Helps in collagen and cell reactivation
• Skin capillary contracture • Improving facial blushing • Collagen
production in skin • Improving skin elasticity • Improving skin wrinkles
RED 630nm I Depth Of Penetration ~12mm
By activating enzymes in underlying skin layers, It activates
mitochondrial metabolism and helps produce collagen and elastin,
helping with cell regeneration and reactivation
• Skin cell activation and reactivation • Improving skin elasticity •
Improving skin wrinkles • Skin cell regeneration • Blood circulation •
Relieve acne scars
FIR-RAY 970mm~4µm I Depth Of Penetration ~40mm
By transferring heat energy to the subdermal blood vessels and fat cell
layers, It improves blood flow and induces transparent skin by helping
to eliminate wastes and toxins in fat cells.
• Improving blood flow • Improving skin tone • Improving skin elasticity
• Skin detoxing
PRODUCT PRINCIPLE
LED(RGBY) for LLLT(Low Level Laser Therapy) is a very stable light source that treats skin diseases
and problems by varying indications depending on the wavelength(nm) of the light source without
damaging the skin with a warm light.

6www.ozmask.com
The effects of OzMask which improve and prevent
skin aging Penetrating Mimics of Healing Rays
BLUE
RED
YELLOW
GREEN
FIR-RAY
effects of acne treatment, relieving atopic dermatitis
relieving wrinkles, skin moisturization, strengthening skin
elasticity
collagen production, discolored skin treatment with light,
Improving skin resistance against UV
relieving atopic dermatitis, suppression of fungi,
prevention of food poisoning
cell growth promotion, wound healing, pain treatment,
muscle relaxation
Schematic diagram of Lay penetration
FAR
INFRARED
RAYS
KRAUSE CORPUSCLE
PACINIAN CORPUSCLEROOT HAIR PLEXUSRUFFINli ENDINGS
MEISSNER CORPUSCLE
AUTONOMIC NERVE ENDINGS MERKEL DISCS
• Improving underlying skin layers
• Improving fine wrinkles
• Toxic emissions
• Activation of subcutaneous fat cells

7
www.ozmask.com
Adapter with Power Cable
Eye Mask (Silicon)User’s ManualTencel Mask pack & Mist
(1 BOX/15pcs) (2pcs)
OzMask Main Body
DC 24V / 5A
This product can be repurchased
separately after use
1. Non-slip rubber packing
2. DC Power lnlet(Adapter)
3. Far Infrared Heater
4. RYGB Focusing Lens product
bottom Sight
PRODUCT STRUCTURE
PRODUCT COMPOSITION
2
4
3
1
24-Minute Miracle • Bright Skin for 24 hours!
User’s Manual
1300 000 998 [email protected]
www.ozmask.com

8www.ozmask.com
USER’S MANUAL DETAILS
Active part viewed from above the product
If you remove the protective film vinyl attached
to the plaque of the active part at the time of use
after the first purchase, the product will be much
more luxurious
If you press the text button written as Mode 1, it works
without pressing the ON button.
Mode 2 is the same. Only slightly touch the ON/OFF button
to turn it off.
Slightly press button Mode 1 of auto mode at the time of use.
Auto Mode 1 operates in the order of red, yellow, green, and blue (RYGB) color for
about 24 minutes. The initial temperature changes from 70°C to 60° C 10 minutes
after an operation and there will be sound by changes.
Do not be surprised because this is not a warning horn for any trouble or operational
failure.
Slightly press button Mode 2 of auto mode at the time of use.
Auto Mode 2 operates in the order of red, yellow, green, and blue (RYGB) color for
about 35 minutes. The initial temperature changes from 70°C to 60°C 10 minutes after
an operation and there will be sound by changes.
Do not be surprised because this is not a warning horn for any trouble or operational
failure.
The difference between Auto Mode 1 and Auto Mode 2 is only 24 minutes for Auto
Mode 1 and 35 minutes for automatic mode 2.
There is only a difference in operating time. Consumers can use it conveniently by
themselves.
We recommend you use auto mode only!
Recommended Mode: Auto Mode
Auto Mode 2
Auto Mode 1
Auto Mode

9
www.ozmask.com
Heater Manual Mode
• LED and thermal mode can be used at the same time and the illumination intensity
can be adjusted in order of low/medium/high level by touching the (RYGB).
• When touching the ON button, the initial set-up temperature is 70° C and the
operating time is set to 60 minutes.
• The temperature is adjusted in 1 degree and it is adjusted by 1 degree when
pressing continuously.
• The time is adjusted in 5 minu tes and changes by 5 minu tes when pressing
continuously
• LED and thermal mode can be used
at the same time
• The illumination intensity can be
adjusted in order of low/medium/high
‘ 0: level by touching the (RYGB)
LED Manual Mode
Heater Manual Mode
If you press the button as shown in the picture, you can adjust the temperature step
by step, but we recommend you only use auto mode before you are used to using the
device if possible.
Temp
Time

10 www.ozmask.com
USER’S MANUAL OPERATION MANUAL
Thank you for purchasing beauty rock.
To ensure a more efficient and safe use of this product, please read and
understand the precautions before using it.
1. Power Operation: Connect the product and the power cable.
- Power-Supply Specification: DC 24V/5A.
(Use the specified power supply. If not, it could cause a failure)
- “--” mark appears in the temperature setting window and the time setting window
when the initial power-on.
2. The setting of LED operating mode
1) AUTO MODE
- MODE 1 operates in the order of RYGB(red, yellow, green, and blue) for 24
minutes. The initial heating temperature is 70°C and the time will be displayed.
- MODE 2 operates in the order of RYGB(red, yellow, green, and blue) for 35
minutes. The initial heating temperature is 70°C and the time will be displayed.
- Touch auto mode or ON/OFF to turn off the auto mode.
2) MANUAL MODE
- LED and thermal mode can be used at the same time
- The illumination intensity can be adjusted in order of low/medium/high level by
touching each button of the (RYGB).
3. The setting of temperature/time in controlling heating mode
- When touching the ON button, the initial set-up temperature is 70°C and
the operating time is set to 60 minutes.
- The temperature is adjusted in 1 degree and it is adjusted by 1 degree when
pressing continuously.
- The time is adjusted in 5 minutes and changes by 5 minutes when pressing
continuously.