PACH & COMPANY AeGIS 100DIR User manual

Pach and Company thanks and congratulates you on the purchase of your AeGIS 100DIR
Multi-Tenant Paper directory.
Product Specifications
Power Input:
12VAC 20VA UL Listed Transformer (supplied) or 12VDC 20VA (not supplied).
Replacement Bulb: 14V 0.08 A 15,000 Average Life Hours.
Current Consumption:
570 mA operating.
Emergency Battery:
12 VDC 4Ahr battery with charging power supply (not supplied)
Operating Environment:
0°F to 140°F or -18°C to 60°C. Relative Humidity 0 % - 95 % noncondensing.
Directory:
Paper Directory with built-in night light. Paper Size 81/5 X 11.
Construction:
16 Gauge Cold Rolled Steel back box with black enamel and Brushed Stainless Steel Faceplate with clear lexan window.
Dimensions (HWD) : 15“ x 14 “ x 1-9/16 “ or 38.1 Cm x 35.6 Cm x 4.0 Cm.
Mount: Surface. Outdoor or Indoor.
Shipping Weight: 10 Lbs or 4.5 Kg. approximate.
Warranty: “Two Years Warranty”.
Installation Procedures
1. Connect all the wiring necessary before installing the AeGIS 100DIR panel as shown below
Warning: Do not power the system with 110VAC, to do so will damage the system and cause fire.
If 12 VDC is used connect the same way as shown below, no polarity.
2. Plug the primary side of the transformer to 115VAC to check the panel lights then unplug it.
3. Install the AeGIS 100DIR panel (indoor or outdoor).
4. Type the name and dial number on provided paper directory or you may create your own paper directory using
Mirosoft word or any word processor program on 8-1/2 x 11paper size.
5. Plug the primary side of the transformer to 115VAC.
AeGIS 100DIR
Installation Manual
Pach & Company 941 Calle Negocio Phone: [phone]
www.pach-co.com San Clemente, CA 92673 Fax: [phone]
AeGIS
100 DIR
To secondary side of the
12VAC 20VA
transformer (supplied)