Panasonic BLPA100KTA - HD-PLC ETHERNET ADAPT.2PK User manual

PQQX15017ZA KK0306CH0
Printed in Japan
Getting Started
HD-PLC Ethernet Adaptor
Power Line Communication
Model No.
BL-PA100KTA
Included items
BL-PA100A
Pre-configured as the "master" adaptor,
as indicated by the seal affixed to the
top of the adaptor.
BL-PA100A
Pre-configured as the "terminal" adaptor.
AC Cord
Connects each adaptor to the wall outlet.
Example of an integrated HD-PLC network
See reverse side for installation instructions.
INTERNET
Master
PC
Network printer
Wall outlet Wall outlet
Wall outlet
Hub
Network camera
Modem
Router PC
Terminal
Terminal
(Add-on adaptor)
This document is written to be used with the BL-PA100KTA,
which is a pre-configured set of 2 adaptors.
No settings are required to use these adaptors.
Simply follow the instructions provided in this document.
Refer to the included Operating Instructions for safety,
reconfiguration, and troubleshooting information.
Additional adaptors
can be added later,
for a total of 16
adaptors including
the master.
See the Operating
Instructions for
details.
Set of 2 Adaptors (Master and Terminal)

1Connect the master adaptor (indicated by the
"MASTER" seal) to the wall outlet using the
included AC cord.
For best results
We recommend connecting the adaptors directly to a wall outlet. Avoid connecting high power-consuming appliances to the same
wall outlet. Additionally, connecting an adaptor to a uninterruptable power supply (UPS) or backup power supply device is not
recommended.
While connecting the adaptors to a wall outlet is recommended, keep the following in mind if you must connect an adaptor to a
power strip:
- Make sure the power strip does not a have a noise filter or a surge protector, as these features may interfere with the
performance of your adaptors.
- Do not connect the adaptor to a power strip that receives power from another power strip.
- Use a power strip with an AC cord that is as short as possible.
For more information, refer to the included Operating Instructions.
Installation
2Connect the master adaptor to a network device
using a LAN cable (sold separately). We
recommend connecting the master to your router.
3Connect the terminal adaptor to the wall outlet
using the included AC cord. 4 Connect the terminal adaptor to a network device, such as your PC, using a LAN cable (sold
separately).
5Confirm that the indicators on the master adaptor
are lit (not flashing) as shown. 6Confirm that the indicators on the terminal adaptor are lit (not flashing) as shown.
If the indicators are not lit as shown above, confirm all
connections and refer to the Troubleshooting section of the
Operating Instructions.
If the indicators are not lit as shown above, confirm all
connections and refer to the Troubleshooting section of the
Operating Instructions.
PLC (blue)
LAN (green)
MASTER (green)
Router
PLC (blue)
LAN (green)
MASTER (off)