Panasonic CS-YE9MKE User manual

F567885
Operating Instructions
Air Conditioner
Indoor Unit Outdoor Unit
CS-YE9MKE CU-YE9MKE
CS-YE12MKE CU-YE12MKE
CS-YE18MKE CU-YE18MKE
QUICK GUIDE
© Panasonic Home Appliances Air-Conditioning
(Guangzhou) Co., Ltd. 2010. Unauthorized
copying and distribution is a violation of law.
ENGLISH
Before operating the unit, read these operating instructions
thoroughly and keep them for future reference.
Operating
Instructions
Air Conditioner
Indoor Unit OutdoorUnit
S-PA7GKD U-PA7GKD
S-PA9GKD U-PA9GKD
S-PA12GKD U-PA12GKD
Printedin China F567885
F1008-00
MODE
AUTO COOL
FAN DRY
Selectthe desired mode.
Seleccioneel modo deseado.
1
OFF/ON
Start/stopthe operation.
Inicie/detengael funcionamiento.
2
TEMP
Selectthe desired temperature.
Seleccionela temperature deseada.
3
QUICK GUIDE / GUÍA RÁPIDA
RemoteControl Preparation • Preparación Del Mando A Distancia
1
Pullout • Quite
2
InsertAAAor R03 batteries (can be used ~ 1 year) •
InsertepilasAAA o R03 (puede ser usado ~ 1 año)
3
Closethe cover • Cierre la tapa
2
1
3
3
1
2
PH005413 F567885 All.indb 1 2011-2-23 15:12:03

2
TABLE OF CONTENTS
SAFETY PRECAUTIONS................................................................................................................8~9
REMOTE CONTROL ..................................................................................................................10~11
INDOOR UNIT....................................................................................................................................12
TROUBLESHOOTING.......................................................................................................................13
INFORMATION ...........................................................................................................................62~67
PRODUCT SPECIFICATION............................................................................................................. 68
QUICK GUIDE...............................................................................................................BACK COVER
ENGLISH Thank you for purchasing PanasonicAir Conditioner
NOTE: The illustrations in this manual are for explanation purposes only and may differ from the actual unit. It is
subjected to change without notice for future improvement.
PH005413 F567885 All.indb 2 2011-2-23 15:12:12

5
OPERATION CONDITION
Use this air conditioner under the following temperature range
Temperature (°C) Indoor Outdoor
*DBT *WBT *DBT *WBT
COOLING Maximum 32 23 43 26
Minimum 16 11 16 11
HEATING Maximum 30 - 24 18
Minimum 16 - -5 -6 * DBT: Dry bulb temperature
* WBT: Wet bulb temperature
NOTICE: • This model is not suitable for 24 hours non-stopping operation in heating mode below -5°C.
When the outdoor temperature is below -5°C and you use this model out of above conditions, the
outdoor unit might be frozen up and stop operation for protection control.
PH005413 F567885 All.indb 5 2011-2-23 15:12:13

8
SAFETY PRECAUTIONS
To prevent personal injury, injury to others, or property
damage, please comply the following.
Incorrect operation due to failure to follow instructions
may cause harm or damage, the seriousness of which is
classied as below:
WARNING
This sign warns of death or serious injury.
CAUTION
This sign warns of injury or damage to property.
The instructions to be followed are classied by the following
symbols:
This symbol denotes an action that is
PROHIBITED
These symbols denote an action that is
COMPULSORY.
WARNING
INDOOR UNITAND OUTDOOR UNIT
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
Please consult authorized dealer or specialist to
clean the internal parts, repair, install, remove
and reinstall the unit. Improper installation and
handling will cause leakage, electric shock or
re.
Do not install the unit in a potentially explosive
or ammable atmosphere. Failure to do so could
result in re.
Do not insert your ngers or other
objects into the air conditioner indoor
or outdoor unit, rotating parts may
cause injury.
Do not touch the outdoor unit during lightning, it
may cause electric shock.
Do not expose yourself directly to cold air for a
long period to avoid excess cooling.
Do not sit or step on the unit, you
may fall down accidentally.
REMOTE CONTROL
Do not allow infants and small children to play
with the remote control to prevent them from
accidentally swallowing the batteries.
POWER SUPPLY
Do not use modied cord,
joint cord, extension cord or
unspecied cord to prevent
overheat and re.
To prevent overheating, re or electric shock:
• Do not share the same power outlet with other
equipment.
• Do not operate with wet hands.
• Do not over bend the power supply cord.
•Do not operate or stop the unit by inserting or
pulling out the power plug.
Air Inlet
Air Outlet
Air Outlet
Air Inlet
Remote
Control
Power
Supply
Indoor
Unit
Outdoor
Unit
PH005413 F567885 All.indb 8 2011-2-23 15:12:15

ENGLISH
9
CAUTION
INDOOR UNITAND OUTDOOR UNIT
Do not wash the indoor unit with water,
benzene, thinner or scouring powder to avoid
damage or corrosion at the unit.
Do not use for preservation of precise equipment,
food, animals, plants, artwork or other objects.
This may cause quality deterioration, etc.
Do not use any combustible equipment in front
of the airow outlet to avoid re propagate.
Do not expose plants or pet directly to airow to
avoid injury, etc.
Do not touch the sharp aluminium n,
sharp parts may cause injury.
Do not switch ON the indoor unit when waxing
the oor. After waxing, aerate the room properly
before operating the unit.
Do not install the unit in oily and smoky areas to
prevent damage to the unit.
Do not dismantle the unit for cleaning purpose
to avoid injury.
Do not step onto unstable bench when cleaning
the unit to avoid injury.
Do not place vase or water container on the
unit. Water may enter the unit and degrade the
insulation. This may cause an electric shock.
Do not left the window open during Cool/Dry
mode operation to prevent water leakage.
Ensure drainage pipe is connected properly and
keep drainage outlet clear of gutters, containers
or does not immersed in water to prevent water
leakage.
After long period of use or use with any
combustible equipment, aerate the room
regularly.
After long period of use, make sure the
installation rack is not deteriorate to prevent the
unit from falling down.
REMOTE CONTROL
Do not use rechargeable (Ni-Cd) batteries.
It may damage the remote control.
To prevent malfunction or damage of the remote
control:
• Remove the batteries if the unit is not going to
be used for a long period of time.
• New batteries of the same type must be
inserted following the polarity stated.
POWER SUPPLY
Do not pull the cord to disconnect the plug to
prevent electric shock.
WARNING
POWER SUPPLY
If the supply cord is damage, it must be
replaced by the manufacturer, its service agent
or similarly qualied persons in order to avoid
a hazard.
It is strongly recommended to be installed
with Earth Leakage Circuit Breaker (ELCB)
or Residual Current Device (RCD) to prevent
electric shock or re.
To prevent overheating, re or electric shock:
• Insert the power plug properly.
• Dust on the power plug should be periodically
wiped with a dry cloth.
Stop using the product when any abnormality/
failure occurs and disconnect the power plug or
turn off the power switch and breaker.
(Risk of smoke/re/electric shock)
Examples of abnormality/failure
• The ELCB trips frequently.
• Burning smell is observed.
• Abnormal noise or vibration of the unit is
observed.
• Water leaks from the indoor unit.
• Power cord or plug becomes abnormally hot.
• Fan speed cannot be controlled.
• The unit stops running immediately even if it is
switched on for operation.
• The fan does not stop even if the operation is
stopped.
Contact immediately your local dealer for
maintenance/repair.
Replacement or installation of power plugs shall
be performed by authorized/qualied personnel
only. The wires in this mains lead are coloured
in accordance with the following code:
Terminals
Red wires
live
neutral
earth
colours (IEC Standard)
blue
green-yellow
brown
Black
Green/Yellow
Wiring colour may vary depending on a country
wiring code’s standard.
This equipment must be earthed to prevent
electric shock or re.
Prevent electric shock by switching off the
power supply and unplug when:
- Before cleaning or servicing.
- Extended non-use.
-Abnormally strong lightning activity.
PH005413 F567885 All.indb 9 2011-2-23 15:12:15

10
REMOTE CONTROL
CHECK ERRORRESETRESET
SELECT
SET/CANCEL
AIRCONDITIONER
QUIET
POWERFUL
/
AB
Press the remote control’s button
1TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
3TO SELECT OPERATION MODE
AUTO mode - For your convenience
• During operation mode selection the power indicator
blinks.
• Unit selects the operation mode according to the indoor
intake temperature and remote control temperature.
HEAT mode - To enjoy warm air
• In heat mode, it may take a while for the unit to warm up.
The POWER indicator blinks during preheating.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4TO SELECT OPERATION MODE
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
Maximum distances: 8m
(GREEN)
(ORANGE)
5TOADJUSTAIRFLOW DIRECTION
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL mode, if AUTO is set, the louver swing up/down
automatically.
• In HEAT mode, if AUTO is set, the horizontal louver x at
predetermined position.
6TOACHIEVE TEMPERATURE QUICKLY
• This setting enables the desired set temperature to be
reached quickly.
7TO ENJOY QUIET ENVIRONMENT
• This setting provides a quiet environment by reducing the
airow noise.
• POWERFUL AND QUIET operations can not be activated
at the same time.
8PRESS TO RESTORE THE REMOTE CONTROL’S
DEFAULT SETTING
9NOT USED IN NORMAL OPERATIONS
Remote Control display
1
5
3
6
8
4
7
9
2
PH005413 F567885 All.indb 10 2011-2-23 15:12:17

ENGLISH
11
TO SET THE TIMER
(12-HOUR TIMER SETTING)
• When you want the air conditioner to turn ON or OFF
automatically.
DELAY OFF-TIMER
For example, to stop the air conditioner 5 hours later.
1 To select the Delay OFF-TIMER, press the
button once.
2 Press the button to select the delay hour.
• The OFF-TIMER can only be set while the air-
conditioner is in operation.
DELAY ON-TIMER
For example, to start the air conditioner 2 hours later.
1 To select the Delay ON-TIMER, press the
button once.
2 Press the button to select the delay hour.
• The ON-TIMER can only be set while the air-
conditioner is not in operation.
DELAY OFF AND ON TIMER
For example, to stop the air conditioner 3 hours later
and start 4 hours later.
1 To select the Delay OFF and ON Timer, press the
button twice repeatedly.
2 Press the button to select the delay hour for
OFF Timer.
3 Press the button to select the delay hour for
ON Timer.
• This mode of timer can only be set while the air-
conditioner is in operation.
DELAY ON AND OFF TIMER
For example, to start the air conditioner 7 hours later
and stop 10 hours later.
1 To select the Delay ON and OFF Timer, press the
button twice repeatedly.
2 Press the button to select the delay hour for
ON Timer.
3 Press the button to select delay hour for OFF
Timer.
• This mode of timer can only be set while the air-
conditioner is not in operation.
TO CONFIRM THE TIMER SETTING
Press the button once to activate the timer
operation which will start when the set time is reached.
TO CANCEL THE TIMER SETTING
Press the button again to cancel the timer
operation.
• The timer indicator of the indoor unit will light up
during the timer operation.
• When ON Timer is set, the unit may start earlier
before the actual set time in order to achieve the
desired temperature on time.
• If you press operation
/
button during the timer
setting operation, timer setting will be cancelled.
• If timer is cancelled manually or due to power failure,
you can restore the timer again by repeating steps
above (once power is resumed).
PH005413 F567885 All.indb 11 2011-2-23 15:12:19

12
CAUTION
•Switch off the power supply before cleaning.
•Do not touch the aluminium n, sharp parts may cause injury.
1INDOOR UNIT
• Wipe the unit gently with a soft, dry cloth.
2FRONT PANEL
Remove Front Panel
• Raise and pull to remove the front panel.
• Wash gently and dry.
Close Front Panel
• Press down both ends of the front panel to close it securely.
3RECEIVER
4ALUMINIUM FIN
5HORIZONTALAIRFLOW DIRECTION LOUVER
• Manually adjustable.
WARNING
Be careful not to insert your ngers into the
unit to avoid injuring by cross-ow fan.
6VERTICALAIRFLOW DIRECTION LOUVER
• Do not adjust by hand.
7AUTO OFF/ON BUTTON
• Use when remote control is misplaced or malfunction.
Action Mode
Press once. Auto
Press and hold until 1 beep is heard,
then release. Cooling
Press and hold until you hear double
beep sound, then release. Heating
Press the button to turn off.
8AIR FILTERS
• Clean the lters regularly.
• Wash/rinse the lters gently with water to avoid damage
to the lter surface.
• Dry the lters thoroughly under the shade, away from
re or direct sunlight.
• Replace any damage lter.
2
5
7
1
4
3
8
6
INDOOR UNIT
WASHING INSTRUCTIONS HINT
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
• To ensure optimal performance of the unit, cleaning
maintenance have to be carried out at regular intervals.
NOTE
• If chemical cloth is used to wipe the unit, instruction for
the cloth should be followed.
PH005413 F567885 All.indb 12 2011-2-23 15:12:22

ENGLISH
13
TROUBLESHOOTING
The following symptoms do not indicate malfunction.
SYMPTOM CAUSE
Mist emerges from indoor unit. ► • Condensation effect due to cooling process.
Water owing sound during operation. ► • Refrigerant ow inside the unit.
The room has a peculiar odour. ► • This may due to damp smell emitted by the wall, carpet,
furniture or clothing.
Indoor fan stops occasionally during automatic fan speed
setting. ►• This helps to remove the surrounding odours.
Operation is delayed a few minutes after restart. ► • The delay is a protection to the unit’s compressor.
Outdoor unit emits water/steam. ► • Condensation or evaporation occurs on pipes.
The unit operates automatically when power is resumed
after a power failure. ► • It is the Auto Restart function of the unit. Operation will
be restarted automatically under the previous operation
mode and air ow direction when power is resumed as
the operation is not stopped by remote control.
Indoor fan stops occasionally during heating operation. ►• To avoid unintended cooling effect.
Power indicator blinks before the unit is switched on. ► • This is a preliminary step in preparation for the operation
when the ON timer has been set.
Cracking sound during operation. ►• Changes of temperature cause the expansion/
contraction of the unit.
Check the following before calling for servicing.
SYMPTOM CHECK
Heating/Cooling operation is not working efciently. ► • Set the temperature correctly.
• Close all doors and windows.
• Clean or replace the lters.
• Clear any obstruction at the air inlet and air outlet vents.
Noisy during operation. ► • Check if the unit has been installed at an incline.
• Close the front panel properly.
Remote control does not work.
(Display is dim or transmission signal is weak.) ► • Insert the batteries correctly.
• Replace weak batteries.
The unit does not work. ► • Check if the circuit breaker is tripped.
• Check if timers have been set.
The unit does not receive the signal from the remote
control. ► • Make sure the receiver not obstructed.
• Certain uorescent lights may interfere with signal
transmitter. Please consult authorized dealer.
The unit stops and the timer indicator blinks.
Use remote control to retrieve error code.
CHECK ERROR RESET RESET
SELECT
SET/CANCEL
QUIET
POWERFUL
/
A B
1Press for 5
seconds. 3Press for 5 seconds
to quit checking.
2Press until you hear
beep sound, then jot
down the error code.
Note:
• For certain error, you may
restart the unit with limited
operation with 4 beeps
during operation starts.
4Turn the unit off and reveal the error code to authorized dealer.
PH005413 F567885 All.indb 13 2011-2-23 15:12:22

68
69
Indoor Unit
Outdoor Unit
Model
CS-YE9MKE
CU-YE9MKE
CS-YE12MKE
CU-YE12MKE
CS-YE18MKE
CU-YE18MKE
COOL HEAT COOL HEAT COOL HEAT
Single, 230V,50Hz Single, 230V,50Hz Single, 230V,50Hz
Power/Current [kW] 0.760 0.880 1.020 1.105 1.660 1.615
[A] 3.60 4.10 4.90 5.20 7.90 7.70
Refrigerant [kg]R410A
0.780
R410A
0.880
R410A
1.15
Cooling Capacity [kW] 2.50 3.30 5.00
Heating Capacity [kW] 3.20 4.00 5.50
Noise Level
JIS C 9612
[<70 dB(A)]
[dB(A)]
40 40 42 42 46 46
Conditions
1m Distance
Max. cooling/
heating
operation
47 48 48 50 50 52
Sound power
level [dB(A)] 56 56 58 58 62 62
63 64 64 66 66 68
Air Circulation [m3/min.] 12.5 13.0 13.5 13.9 14.6 15.3
kgProduct Weight [kg]8.0 8.0 7.5
22 26.5 31.5
Dimensions (H x W x D) [mm] 283 x 803 x 214 283 x 803 x 214 283 x 803 x 214
540 x 780 x 289 540 x 780 x 289 540 x 780 x 289
PRODUCT SPECIFICATION
Test conditions
1. Temperature (°C)Indoor Outdoor
*DBT *WBT *DBT *WBT
COOLING 27 19 35 24
HEATING 20 12 7 6
2. Standard piping length: 7.5 m (Includes Indoor Unit piping length).
PH005413 F567885 All.indb 68 2011-2-23 15:12:08

68
69
PH005413 F567885 All.indb 69 2011-2-23 15:12:10

MEMO
PH005413 F567885 All.indb 70 2011-2-23 15:12:10

MEMO
PH005413 F567885 All.indb 71 2011-2-23 15:12:10

Panasonic Corporation
Printed in China F567885 F1102-01
QUICK GUIDE/GUIDE RAPIDE/GUÍA RÁPIDA/KURZANLEITUNG/GUIDA RAPIDA/
SNELLE GIDS/GUΙA RÁPIDO/ΣΥΝΤΟΜΟΣ ΟΔΗΓΟΣ/БЪРЗ СПРАВОЧНИК
MODE
AUTO HEAT
DRY COOL
Select the desired mode.
Sélectionnez le mode de fonctionnement souhaité.
Seleccione el modo deseado.
Gewünschte Betriebsart einstellen.
Selezionare la modalità desiderata.
Selecteer de gewenste modus.
Seleccione o modo de funcionamento pretendido.
Επιλέξτε τον επιθυμητό τρόπο λειτουργίας.
Избор на желания режим на работа.
1
OFF/ON
Start/stop the operation.
Mettez l’appareil sous/hors tension.
Inicie/detenga el funcionamiento.
Gerät ein- bzw. ausschalten.
Avviare/arrestare l’apparecchio.
Start/stop het gebruik.
Ligue/Desligue a unidade.
Ξεκινήστε/σταματήστε τη λειτουργία.
Включване/спиране.
2
TEMP
Select the desired temperature.
Sélectionnez la température souhaitée.
Seleccione la temperature deseada.
Die gewünschte Temperatur einstellen.
Selezionare la temperatura desiderata.
Selecteer de gewenste temperatuur.
Programe a temperatura desejada.
Ρυθμίστε την επιθυμητή θερμοκρασία.
Настройка на желаната температура.
3
2 1
Remote Control Preparation • Préparation De La Télécommande • Preparación Del Mando A
Distancia • Vorbereitung der Fernbedienung • Telecomando: Operazioni Preliminari •
Afstandsbediening voorbereiding • Preparação Do Controlo Remoto • Προετοιμασία
Τηλεχειριστηρίου • Подготвяне На Дистанционното Управление
2
1
3
1Remove the battery cover • Retirer le couvercle de la batterie • Retire la tapa de las pilas. •
Entfernen Sie die Batterieklappe • Rimuovere il coperchio batteria • Verwijder het klepje van
de batterijen • Remova a tampa da bateria. • Αφαιρέστε το κάλυμμα της μπαταρίας • Свалете
капака за батериите
2Insert AAA or R03 batteries (can be used ~ 1 year) •
Placez des piles AAA ou R03 (valables environ 1 an) •
Inserte pilas AAA o R03 (puede ser usado ~ 1 año) •
Batterien des Typs AAA oder R03 einlegen (Betriebsdauer etwa ein Jahr) •
Inserire batterie AAA o R03 (può essere utilizzato per circa 1 anno) •
Plaats AAA of R03 batterijen (kunnen ongeveer 1 haar gebruikt worden) •
Introduza pilhas AAA ou R03 (pode ser utilizado ~ 1 ano) •
Τοποθετήστε μπαταρίες AAA ή R03 (μπορούν αν χρησιμοποιηθούν ~ 1 χρόνο) •
Поставете AAA или R03 батерии (могат да се използват приблизително една година)
3Close the cover • Fermez le couvercle • Cierre la tapa • Batteriefach schließen •
Chiudere il coperchio • Sluit de klep • Feche a tampa • Κλείστε το κάλυμμα • Затворете капака
3
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Service Europe, a division of
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany
PH005413 F567885 All.indb 72 2011-2-23 15:12:12