Panasonic DP-190 User manual

Getting To Know
Your Machine
Before Starting
Making Copies
Function
Network Scanner
Problem Solving
Appendix
Digital Imaging System
Operating Instructions
(For Copy & Network Scan Functions)
Model No. DP-190
Before operating this equipment, please read these instructions completely
and keep these operating instructions for future reference.
English

2
Getting To Know Your Machine
Copy
•Copy up to Legal size originals.
•Capable of copying text/photos/
halftone originals.
Scan/File
•Monochrome/Color scanner
capability.
•Scanning resolution up to:
Monochrome : 600 dpi
Color : 300 dpi
•A document can be scanned in
Color.
Useful Office Functions
Multi-Tasking Job Table
<Copy & Network Scan>
<Facsimile &
Internet Fax/Email>
<Print &
Other Advanced Functions>
Use the information provided on the enclosed CD whenever a Copy & Network Scan
function requires intervention.
For example: How to make copies, add paper, replace the toner cartridge, etc.
Use the information provided in the DP-190 Facsimile & Internet Fax/Email Operating
Instructions manual whenever a Fax/Internet Fax function requires intervention.
For example: How to send/receive a Fax/Email, or when a trouble message
appears, etc.
Use the information provided on the enclosed CD for an explanation of how to
use as a Network Printer, Network Scanner, Edit Directory Dialing Feature,
Device Settings, Network Status Monitor, and/or Document Management System.
Fax/Email
•Plain Paper High-speed Super
G3 compatible Fax with JBIG
compression.
•Quick-Scan
•Quick Memory Transmission
•Email Function capability.
Print
•Printer controller standard,
printer resolution 300 or 600
dpi.
Application Software
•Document Manager
•Document Viewer
•Network Scanner
•Utilities (Network Status Monitor, Address Book Editor, Network Configuration Editor)
•Panafax Desktop
■The following operating instruction manuals are provided for this machine, please use the correct manual when an
operator intervention is necessary.
Facsimile
(Receiving)
Memory
Receiving
Printing Received
Memory Data
Storing
Document
Memory
Transmission
Receiving
Data
Printing
Received Data
Storing
Document
Transmission
Facsimile
(Sending)
GDI/PCL/PS
Printing
Network Scanning
(Monochrome/Color)
Internet Fax
Current
Job
2nd Job
Copy
Copy
Copy
Network Scanning (Monochrome/Color), Internet Fax
Storing Document
GDI/PCL/PS Printing
Receiving Data
Printing Receive Document
Facsimile (Sending)
Storing Document
Memory Transmission
Facsimile (Receiving)
Memory Receiving
Printing Received
Memory Data
*
: Accepts and executes the 2nd Job.
: Accepts and executes the 2nd Job (Copy) only if the Current Job is interrupted.
: Accepts the 2nd Job and executes the 2nd Job after the Current Job is completed.
: Not applicable.
*: HDD (DA-HD19) and additional 16MB (minimum) Image memory are required.
NOTE

3
Getting To Know
Your Machine
Operating Instructions Outline
Function
Getting To Know
Your Machine
Before Starting
Making Copies
Network Scanner
Problem Solving
Appendix
●Precautions (See pages 7-13)
●Quick Operation Chart, Adding Paper (See pages 14, 15)
●Problem Solving, Memory Full,
Replacing Toner Cartridge, Removing a Misfed Paper,
Error Codes (U Code/J Code) (See pages 15-21)
●Control Panel Key/Indicator Names
(See pages 22, 23)
●Operating Instructions for making copies
(See pages 24-33)
●Changing the Initial Machine Modes
●General, Copier, Printer and Scanner Settings
(See pages 34-45)
●Document Scanning (See pages 46, 47)
●Address Book (See pages 48, 49)
●Function (See pages 50-51)
●Remote Copy (See pages 52-53)
●Direct Connection (with Crossover Cable)
(See pages 54, 55)
●Troubleshooting/Machine Care (See pages 56, 57)
●Replacing the Battery/Set the Date and Time
(See pages 58, 59)
●Specifications, Combined Function Table, Options and
Supplies, etc.
(See pages 60-64)

4
Getting To Know Your Machine
The following Symbols/Icons are used throughout this operating instructions manual.
Place original(s) on the ADF
Place original on the Platen
(Book)
Place original on the Platen
(Sheet)
Press any Hard Key on the
Control Panel
Input text with a Keyboard
●Station Name, Directory
Search, etc.
Input numbers
●Number of Copies, etc.
Go to next step
Go to next step (below)
When making copies
When scanning document(s)
Getting to know your machine
Before starting
Problem solving
Appendix
(Specifications, Index)
When setting the machine
modes
Press Hard Key
A
B
C
Symbols/Icons
5

5
Getting To Know
Your Machine
Getting To Know Your Machine
Getting to Know Your Machine
Useful Office Functions .................................................................................................................. 2
Multi-Tasking Job Table .................................................................................................................. 2
Operating Instructions Outline ...................................................................................................... 3
Symbols/Icons ................................................................................................................................. 4
Precautions...................................................................................................................................... 7
Operation Chart ............................................................................................................................. 14
■Quick Operation Chart ................................................................................... 14
●Adding Paper .............................................................................................. 14
■Problem Solving ............................................................................................. 15
●Replacing Toner Cartridge and/or Drum Unit ............................................. 16
●Removing a Misfed Paper .......................................................................... 18
●User Error Codes (U Code) ........................................................................ 20
●Jam Error Codes (J Code) ......................................................................... 20
Before Starting
Control Panel ................................................................................................................................. 22
Making Copies
Basic Copy..................................................................................................................................... 24
■Copying the Same Size Originals (1:1) .......................................................... 24
■Sort Mode....................................................................................................... 24
■Position of the Original(s) ............................................................................... 24
■Copying with Preset or Variable Zoom Ratios ................................................ 24
■Using the ADF ................................................................................................ 25
Creative Features .......................................................................................................................... 26
■1 2 Copy ................................................................................................... 26
■2 2 Copy, 2 1 Copy ............................................................................. 26
■N in 1 .............................................................................................................. 28
Other Features............................................................................................................................... 30
■Double Exposure............................................................................................ 30
■Skyshot Mode ................................................................................................ 30
■Multi-Size Feeding ......................................................................................... 32
■Energy Saver (Power Saver Mode, Sleep/Shutdown Mode) ......................... 32
■Job Memory ................................................................................................... 33
Function
■Using Function Modes to Change the Initial Machine Modes ........................ 34
■Procedure....................................................................................................... 34
■General Settings ............................................................................................ 36
■General Settings (For Key Operator) ............................................................. 36
■Copier Settings............................................................................................... 38
■Copier Settings (For Key Operator) ............................................................... 39
■Printer Settings............................................................................................... 39
■Printer Settings (For Key Operator) .............................................................. 40
■Scanner Settings (Scan Parameters)............................................................. 41
For Example................................................................................................................................... 42
■Changing the Paper Size (Paper Tray) .......................................................... 42
■Changing the Paper Size (Sheet Bypass)...................................................... 42
■Department Counter ....................................................................................... 44
■Network Settings ............................................................................................ 44
Table of Contents

6
Getting To Know Your Machine
Table of Contents
Network Scanner
Document Scanning ..................................................................................................................... 46
■Document Scanning ....................................................................................... 46
Address Book ................................................................................................................................ 48
■Adding your PC's IP Address ......................................................................... 48
■Editing/Erasing your PC's IP Address ............................................................ 48
Function ......................................................................................................................................... 50
■Scan Parameters ........................................................................................... 50
■Select Mode ................................................................................................... 50
Remote Copy ................................................................................................................................. 52
■Remote Copy ................................................................................................. 52
Direct Connection (with Crossover Cable) ................................................................................. 54
■Direct Connection (with Crossover Cable) ..................................................... 54
Problem Solving
Troubleshooting ............................................................................................................................ 56
■Machine Care ................................................................................................. 57
Replacing the Battery/Set the Date and Time............................................................................. 58
Appendix
Specifications ................................................................................................................................ 60
■DP-190 (For Copier)....................................................................................... 60
■ADF (Standard) .............................................................................................. 60
■Network Scanner (Standard).......................................................................... 61
■2nd Paper Feed Module (DA-DS188) (Option) .............................................. 61
■Combined Function Table .............................................................................. 61
Options and Supplies ................................................................................................................... 62
■Options ........................................................................................................... 62
■Supplies ......................................................................................................... 62

7
Getting To Know
Your Machine
Getting To Know Your Machine
Precautions
■Laser Safety
■Caution Label
Manufacturer’s Name
and Address
Factory ID
LASER SAFETY
This unit employs a laser. Only qualified service personnel
should attempt to service this device due to possible eye injury.
CAUTION:
USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.

8
Getting To Know Your Machine
Power and Ground Connection Cautions
Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can draw a significant amount of current that can generate heat and
eventually cause fire over an extended period of time.
Always use the power cord provided with your machine. When an extension power cord
is required, always use a properly rated cord.
●120 V/15 A
If you use a cord with an unspecified current rating, the machine or plug may emit smoke
or become hot to the touch externally.
Do not attempt to rework, pull, bend, chafe or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause fire or electric shocks.
For Your Safety
To prevent severe injury and loss of life, read this section carefully before using the Panasonic
DP-190 to ensure proper and safe operation of your machine.
■This section explains the graphic symbols used in this Operating Instructions manual.
WARNING:
Denotes a potential hazard that could result in serious injury or death.
CAUTION:
Denotes hazards that could result in minor injury or damage to the machine.
■This section also explains the graphic symbols used in this Operating Instructions manual.
These symbols are used to alert operators to a specific operating procedure
that must not be performed.
These symbols are used to alert operators to a specific operating procedure
that must be emphasized in order to operate the machine safely.
Installation and Relocation Cautions
Do not place the machine near heaters or volatile, flammable, or combustible materials
such as curtains that may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment.
Prolonged exposure to these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can withstand a weight of 48.5 lb
(22kg). If tilted, the machine may tip-over and cause injuries.
When relocating the machine, contact your Service Provider.
When moving the machine, be sure to unplug the power cord from the outlet. If the
machine is moved with the power cord attached, it can cause damage to the cord which
could result in fire or electric shock.
Precautions
CAUTION
WARNING

9
Getting To Know
Your Machine
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is broken or insulated wires are exposed, contact your Service Provider for a
replacement. Using a damaged cord can cause fire or electric shocks.
Stop operation immediately if your machine produces smoke, excessive heat, unusual noise, or smell,
or if water is spilt onto the machine. These conditions can cause fire. Immediately switch Off and
unplug the machine, and contact your Service Provider.
Do not disconnect or reconnect the machine while it is on. Disconnecting a live connector can deform
the plug and cause fire.
When disconnecting the machine, grasp the plug instead of the cord. Forcibly pulling on a cord can
damage it and cause fire or electric shock.
When the machine is not used over an extended period of time, switch it Off and unplug it. If an unused
machine is left connected to a power source for a long period, degraded insulation can cause electric
shocks, current leakage or fire.
Be sure to switch Off and unplug the machine before accessing the interior of the machine for cleaning,
maintenance or fault clearance. Access to a live machine’s interior can cause electric shock.
Be sure to switch Off and unplug the machine before accessing the interior of the machine for
accessing interface cables, maintenance or fault clearance. Access to a live machine’s interior can
cause electric shock.
Once a month, unplug the machine and check the power cord for the following. If you notice any
unusual condition, contact your Service Provider.
●The power cord is plugged firmly into the receptacle.
●The plug is not excessively heated, rusted, or bent.
●The plug and receptacle are free of dust.
●The cord is not cracked or frayed.
Others
■The machine has a built-in circuit for protection against lightning-induced surge current. If lightning strikes in your
neighborhood, switch Off the machine. Disconnect the power cord from the machine and reconnect only when the
lightning has stopped.
■If you notice flickering or distorted images or noises on your audio-visual units, your machine may be causing
radio interference. Switch it Off and if the interference disappears, the machine is the cause of the radio interference.
Perform the following procedure until the interference is corrected.
●Move the machine and the TV and/or radio away from each other.
●Reposition or reorient the machine and the TV and/or radio.
●Unplug the machine, TV and/or radio, and replug them into outlets that operate on different circuits.
●Reorient the TV and/or radio antennas and cables until the interference stops. For an outdoor antenna, ask
your local electrician for support.
●Use a coaxial cable antenna.
Operating Safeguards
Do not touch areas where these caution labels are attached to, the surface may be very hot and may
cause severe burns.
Do not place any liquid container such as a vase or coffee cup on the machine. Spilt water can cause
fire or shock hazard.
Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts get
into the machine, they can short-circuit internal components, and cause fire or electric shocks.
If debris (metal or liquid) gets into the machine, switch Off and unplug the machine. Contact your
Service Provider. Operating a debris-contaminated machine can cause fire or electric shock.
Never open or remove machine covers that are secured with screws unless specifically instructed in
the “Operating Instructions”. A high-voltage component can cause electric shocks.
Do not try to alter the machine configuration or modify any parts. An unauthorized modification can
cause smoke or fire.
WARNING

10
Getting To Know Your Machine
Do not place a magnet near the safety switch of the machine. A magnet can activate the
machine accidentally, resulting in injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire.
When copying a thick document, do not use excessive force to press it against the
document glass. The glass may break and cause injuries.
Never touch a labelled area found on or near the heat roller. You can get burnt. If a sheet
of paper is wrapped around the heat roller, do not try to remove it yourself to avoid
injuries or burns. Switch Off the machine immediately, and contact your Service Provider.
Do not use conductive paper, e.g. folding paper, carbonic paper and coated paper. When
a paper jam occurs, they can cause a short circuit and fire.
Do not place any heavy object on the machine. An off-balance machine can tip-over or
the heavy object can fall, causing damage and/or injuries.
Keep the room ventilated when using the machine for an extended period of time to
minimize the ozone density in the air.
When copying with the document cover open, do not look directly at the exposure lamp.
Direct eye exposure can cause eye fatigue or damage.
Pull out paper trays slowly to prevent injuries.
When removing jammed paper, make sure that no pieces of torn paper are left in the
machine. A piece of paper remaining in the machine can cause fire. If a sheet of paper is
wrapped around the heat roller, or when clearing a jammed paper that is difficult or
impossible to see, do not try to remove it by yourself. Doing so can cause injuries or
burns. Switch Off the machine immediately, and contact your Service Provider.
Others
■When clearing a paper jam or other fault, follow the appropriate procedure given in the Operating
Instructions.
Precautions
CAUTION
Consumable Safeguards
Never throw a toner cartridge into an open flame. Toner remaining in the cartridge can
cause an explosion and you can get burnt.
Never throw toner or a waste toner container or a toner cartridge into an open flame. It
can cause an explosion and you can get burnt.
Keep button batteries out of the reach of children. If a button battery is swallowed
accidentally, get medical treatment immediately.
Never heat the drum cartridge, or scratch its surface. A heated or scratched drum can be
hazardous to your health.
Do not mix new and old batteries together. Otherwise, batteries can burst or leak,
causing fire or injuries.
Be sure to use the specified type of batteries only.
Ensure that batteries are installed with correct polarity. Incorrectly installed batteries can
burst or leak, resulting in spillage or injuries.
WARNING
CAUTION

11
Getting To Know
Your Machine
For Your Safety
■The maximum power consumption is 900 W.
A properly wired (grounded), dedicated, 15A, 120V AC outlet is required. Do not use an extension cord.
The power cord on this machine must be used to disconnect the main power.
Please ensure that the machine is installed near a wall outlet and is easily accessible.
Caution Note: Unplug the power cord from the wall outlet before removing covers.
Supplies
■Store the Toner Cartridge and paper in cool areas with low humidity.
●Use high quality 16 - 28 lb (Sheet Bypass: 16 - 44 lb) paper.
●For optimum performance, it is recommended that only Panasonic Brand supplies are used in the machine.
●Certain types of transparency film may not be compatible and may damage your machine.
Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.
(Panasonic has tested “3M CG3300” transparency film and found it to be compatible.)
●Panasonic recommends using high quality 16 - 28 lb paper, using an inferior paper may cause excessive paper
curl, requiring you to empty out the Output Tray more often to avoid paper jams.
■Use of other than genuine Panasonic supplies can damage the printer. This may void the warranty of the printer
and supplies. Be sure to use only genuine Panasonic Toner Cartridge (DQ-UG17H) designed for the machine.
Average yield for the DQ-UG17H is approximately 5,000 pages (5% coverage).
Note: Average yield is based on 5% coverage of the printable area with repetitive printing of 10 pages (Letter/A4
size, single side printing, default density). The yield of a Toner Cartridge varies depending on the coverage,
temperature, humidity, media, etc. Therefore, the average yield cannot be guaranteed. Continuously printing
10% coverage of printable area will reduce the yield of the Toner Cartridge to about half as compared to 5%
coverage printing. The maximum yield of the Toner Cartridge will not exceed 6,000 pages.
Installation
■The machine should not be installed in areas with the following conditions:
●Extremely high or low temperature and humidity.
Ambient conditions Temperature: 50 – 86 °F
Relative humidity: 30 – 80 %
●Where temperature and humidity can change rapidly, causing condensation.
●Direct exposure to sunlight. ●Directly in the air conditioning flow.
●In areas of high dust concentration. ●In areas of poor ventilation.
●In areas with chemical fume concentration. ●In areas with extreme vibration.
●With unstable or uneven conditions (floors, etc.).
Illegal Copies
It is unlawful to make copies of certain documents.
Copying certain documents may be illegal in your country. Penalties of fines and/or imprisonment may be im-
posed on those found guilty. The following are examples of items that may be illegal to copy in your country.
●Currency
●Bank notes and checks
●Bank and government bonds and securities
●Passports and identification cards
●Copyright material or trademarks without the consent of the owner
●Postage stamps and other negotiable instruments
This list is not inclusive and no liability is assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice:
Install your machine near a supervised area to prevent illegal copies from being made.

12
Getting To Know Your Machine
Ventilation
■The machine should be installed in a well-ventilated area to minimize the ozone density in the air.
WARNING For USA
FCC WARNING:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Relocate the fax machine with respect to receiver or other equipment.
3. Connect the fax machine into outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Warning: To assure continued compliance, use only USB shielded interface cable when
connecting this product to host computer. Also any changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Responsible Party: Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, NJ 07094
FCC Inquiries Only: Panasonic Digital Document Company/Technical Support Department
Two Panasonic Way, Secaucus, NJ 07094
1-800-225-5329 (see Note below)
Email: [email protected]
Note: For Technical Support, please contact your Authorized Panasonic
selling dealer.
This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in
some components. Disposal of these materials may be regulated in your community due to
environmental considerations.
For disposal or recycling information please contact your local authorities, or the Electronics
Industries Alliance: <http://www.eiae.org >.
Handling
■Do not turn the Power Switch Off or open the Front Cover during copying/printing.
■Energy Saver Mode Notice
●The following functions will not work if the Energy Saver Mode setting is set to the Shutdown
mode.
When using any of the following functions, we recommend that you leave the Energy Saver
Mode in the initial factory default setting (Sleep mode). (See page 36)
• Printer Function (USB Local and Network Connections)
• Internet Fax/Email Function
• Facsimile Function
When the LAN cable is not connect and DHCP DEFAULT is "VALID" (See page 37)
Precautions

13
Getting To Know
Your Machine
<Front Side>
Hole Cover
Do not turn
the Hole Cover
as illustrated.
Original Position
Hole Cover
Locked Position
■Key Operator Password
●The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes require
the Key Operator Password.
For Key Operator :
When setting up this machine, please consult with the authorized service provider,
and decide on the Key Operator Password together, then record it and keep it in a
safe place for future reference.
■Dept. (Departmental) Code
When the Department Counter function is set up, the Dept. (Department) Code
input screen is displayed on the LCD Display. A registered Department Code (1 to
8-digit) is required to gain access to each secured function, or the secured Copy/
Fax/Scanner function(s) cannot be used. Please consult with the Key Operator
regarding the Department Code(s) for the desired function.
Procedures :
Input a registered department code (1 to 8-digit).
Press the SET or START Key.
■Number of Copies
The maximum number of copies is up to 999 (3 digit with keypad). During the copy mode, if you input 4-8 digit
numbers, they will be interpreted as being a phone number and displayed on the LCD, then the machine will
switch to the Fax mode.
■Memory Full
If the memory becomes full during original scanning, the message “MEMORY FULL CONTINUE? 1:YES 2:NO”
will be displayed on the LCD. If this occurs, follow the instructions on the LCD. If this occurs frequently, adding
optional memory is recommended, consult with an authorized service provider.
■Maximum Copies Limitation
After setting the maximum allowed number of copies for each department (see page 44), consult with your Key
Operator when the total copy count reaches the designated limit and the “DEPT.MAXIMUM COPIES HAS BEEN
REACHED” message appears on the LCD.
■Power Switch
If the Hard Disk Drive Unit (DA-HD19) is installed, to prevent a Scan Disk Function from being performed (similar
to Windows OS when the power is abruptly interrupted), it is important to follow the step sequence below when
turning OFF the Power Switch on the machine.
1. If the machine is in the “ENERGY SAVER (Shutdown
Mode)”, you may turn the Power Switch on the Left
Side of the machine to the OFF position. If it is not in
the “ENERGY SAVER (Shutdown Mode)”, continue
to step 2 below.
2. Press “FUNCTION” and “ENERGY SAVER” keys
simultaneously first. The Energy Saver Key will light.
3. Turn the Power Switch on the Left Side of the machine
to the OFF position.
INPUT DEPT. CODE
********
1 to 8-digit
■Auto Reset Time
As the initial setting for Auto Reset Time is 1 minute, selected default operation mode backs to default operation
mode after 1 minute. If you wish to change Auto Reset Time, consult your Key operator. (See page 36)
■DHCP (Dynamic Host Configuration Protocol)
If your machine fails to log onto the DHCP Server, the message "DHCP NOT RESPONDING 1:RETRY 2:DISABLE"
will be displayed on the LCD. User intervention is required to continue operation. Check your LAN connection and
press 1to Retry or 2to Disable the DHCP Server validation.
■Hole Cover
Do not turn the Hole Cover.
When the Hole Cover is turned
from original position to the locked
position, documents cannot be
copied from the Platen Glass.

14
Getting To Know Your Machine
Tray-2 Max. Level Indicator
Paper Tray
Empty
Full
*Hold the guides by the center
when adjusting the width.
Face Up
Until it stops
Push
Tray-1 Max. Level Indicator
Operation Chart
Face Up
A
B
C
From
ADF
From
Platen
Face Down
●If the original is not positioned
properly, a portion of the original
may not be copied.
●For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
or
●Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
Original Guides
■Quick Operation Chart
1 2
12
1 2
Feed 1 sheet of paper at a time.
Paper Weight: 16 - 44 lb
Adjust the width guides.
Incorrect adjustment may cause
the paper to wrinkle, misfeed or
skew.
NOTE: For envelope printing refer
to the Panasonic-DMS
Operating Instructions
manual included on the CD.
Adding Paper
Turn the Power
Switch on the
Left side of the
machine to the
ON position.
Original Guides*
Adjust to the
original's width
Tray
(Max. 50 Letter
size originals)
INV: Invoice, LTR: Letter
The Paper Level Indicator moves down
as paper level declines, warning you
that the paper is running out.
Paper Level Indicator (Orange)
Exit Tray
Pull the Exit Tray
until it stops.
1 2
NOTE: When “ADD PAPER” message appears on
the display, Tray-1 or Tray-2 have either ran
out of paper or are not closed firmly (see
page 21). Replenish the paper in the tray(s)
or ensure that the tray(s) are closed.
For Tray-1
For Tray-2 (Option)
Do not press Start until the LCD displays
the “paper size” with an “ ”. Press the
" " key to select another size.
If set in other
function mode
1
2
●Adding Paper (Paper Trays: Tray-1 and Tray-2)

15
Getting To Know
Your Machine
Paper Tray-2
Reduction/
Enlargement only
■Problem Solving
34
Number of
Copies
(Max. 999)
5
Select desired settings
(See pages 24-33)
LTR ->INV [LTR 1]
ZOOM: 65% COPIES:001
Paper Tray-1
For Tray-1
Load Paper: Face Down
Paper Weight: 16 - 28 lb
(2-Sided Copy:
20 - 24 lb)
Paper Capacity:250 Sheets (20 lb) NOTE:
1) To prevent paper jams or other problems,
adjust the paper guides (Length & Width)
when loading paper into the tray.
2) When changing the paper size, refer to
page 42.
3) Make sure that the paper is set properly
and that it does not exceed the Tray-1/
Tray-2 Max. Level indicator.
4) When replenishing paper into Tray-2,
please see page 21.
3
LTR ->LTR [LTR 1]
ZOOM:100% COPIES:001
NOTE:
1) When changing the paper size, refer to page 42.
2) Feeding paper into the Sheet Bypass at the same
time when the copying/printing has started and
paper is feeding from either Tray 1 or Tray 2, will
show "REMOVE MISFED PAPER J00” message
on the LCD display. When this occurs, remove the
paper from the Sheet Bypass to reset the jam
indication then resume copying/printing.
3) Do not leave a paper in the Sheet Bypass as paper
jam indication may display.
■ Copying onto Transparency Film (OHP), Thick Paper Stock, etc. (except thin paper)
Before Pressing Start Key Making Copies
Rear Cover
Catch
3
Firmly close the Paper Tray.
For Tray-2
Load Paper: Face Down
Paper Weight: 16 - 28 lb
(2-Sided Copy:
20 - 24 lb)
Paper Capacity:550 Sheets (20 lb)
Adding Paper (See pages 14 and 21)
Replacing Toner Cartridge (See page 16)
Removing a Misfed Paper (See page 18)
U## (User Error Code) (See page 20)
J## (Jam Error Code) (See page 20)
E## (Machine Error Code) (Call your Service Provider)
Maximum Copies Limitation (See page 13)
1Open Rear Cover.
Catch the ejected copy (do not pull).
When finished, close the Rear Cover.
2
NOTE:
Do not open the Rear Cover when copying
thin paper as it may cause a paper jam.
3

16
Getting To Know Your Machine
Drum Unit/Toner
Cartridge
Release Latch
Old Toner Cartridge
Drum UnitNew Toner
Cartridge*
Front Cover
Operation Chart
■Problem Solving
●Replacing Toner Cartridge and/or Drum Unit
1
Low Toner Warning
Low Toner message will follow this progression:
(Replace the Toner Cartridge before toner runs out)
TONER IS RUNNING LOW
U13
WARNING TONER LOW
LESS THAN 50 PAGES
OUT OF TONER
U13
Toner is Low.
Machine can make less than 500 copies*.
*Based on 5% coverage (see page 11)
Toner is nearly Empty.
Machine can make less than 50 copies.
Toner is Empty.
Machine stops.
FUNCTION MODE (1-2)
ENTER NO. OR ∨^
Drum Life Warning
When the Drum Unit reaches its replacement cycle, the following
message will be shown on the LCD.
12
REPLACE DRUM UNIT Replace the Drum Unit.
•The Drum Unit (DQ-UH35H) yield is
approximately 20,000 pages.
Order Form for Toner Cartridge and/or Drum Unit.
To order the Toner Cartridge and/or Drum Unit, print the desired Order
Form as shown below, and Fax the completed form to your authorized
servicing dealer.
If the unit is in other than Copy Mode, press the COPY Key.
Press the FUNCTION Key on the Control Panel.
FUNCTION MODE (1-2)
ENTER NO. OR ∨^
GENERAL PARAM.(0-9)
ENTER NO. OR ∨^
Press "1" and SET Keys.
SUPPLY FORMS?
1:TONER 2:DRUM
Press "6" and SET Keys.
Press "1" or "2" Key to print the desired Order Form.
"1"
Toner Cartridge Order Form
"2"
Drum Unit Order Form
Press "1" and SET Keys.
8
4
(ATTENTION)
●For optimum copy quality use the recommended Panasonic Toner
Cartridge. Store Toner Cartridge in a cool dark place.
16
*Please use the old Toner
Cartridge which was
removed in step 4 if it's
usable.
2
1
3
NOTE: When printing a large quantity of printouts or copies, the LCD may
skip directly to message above.
3

17
Getting To Know
Your Machine
Clean the excess toner
with a soft cloth.
Drum
Drum Unit/Toner Cartridge
Cleaning Tool
A cleaning tool is included
with the Toner Cartridge.
Slide 3 times
on each side
Guide Rails
Drum Unit/Toner Cartridge
Place the Drum Unit/Toner
Cartridge over the Guide Rails
and insert it until it stops.
Protective Sheet
New Drum Unit
Shake
10-15 times
Tape and Protective Cover
New Toner
Cartridge
*
Drum Unit
Drum Unit/Toner
Cartridge
4
3
ATTENTION
●Do not remove the
protective cover unless
you are ready to use it.
Drum Unit/Toner
Cartridge
2
Front Cover
67
8
13
To replace the Drum Unit:
To replace the Toner Cartridge:
Perform steps (4 - 14). (Skip step 6)
To replace the Drum Unit:
Perform steps (4 - 18).
(Skip steps 5, 7 and 10)
To replace the Toner Cartridge
and Drum Unit:
Perform steps (4 - 18).
14 Perform steps (15 - 18) for
Drum Replacement only:
If the unit is in other than
Copy Mode, press the COPY
Key.
Press the FUNCTION Key on
the Control Panel.
GENERAL PARAM.(0-9)
ENTER NO. OR ∨^
15
Press "5" and SET Keys.
5: Drum Replacement
NEW TONER REPLACED?
1:YES 2:NO
18
Press "1" Key.
Press RESET Key on the Control Panel.
1
2
DRUM REPLACEMENT?
1:YES 2:NO
When Drum Unit is replaced.
ATTENTION
●Be careful not to scratch the surface of the Drum Unit (Green),
and not to touch it with bare hands.
To replace the Toner Cartridge only:
5
910 11
12
16
17
To replace the Toner Cartridge only:
1:Select "1: YES" if a new toner
cartridge was installed.
2:Select "2: NO" in all other
cases.
NOTE:
Keep this Cleaning Tool for
future use.
1
2
3
When Toner Cartridge has
been replaced.

18
Getting To Know Your Machine
J44, J82, J83:
J43, J44, J80:
Rear Paper Tray Cover
Pin Pin
Guide Rails
Drum Unit/Toner Cartridge
Place the Drum Unit/Toner
Cartridge over the Guide Rails
and insert it until it stops.
Misfed Paper
Front Cover
Paper Release Knob
Misfed Paper
Drum Unit/Toner
Cartridge
Drum Unit/Toner
Cartridge
Rear Cover
Operation Chart
■Problem Solving
●Removing a Misfed Paper (Paper Feed/Paper Transport/Automatic Duplex Unit Area)
1 2
1 2
REMOVE MISFED PAPER
J44
6 7
(Rear Side)
Misfed Paper
ADF Cover
●Removing a Misfed Paper (ADF) : J70, J71, J79, J90, J92, J93
1 2
REMOVE MISFED PAPER
J92
Remove Misfed Paper
NOTE:
The J## Code indicates the most
probable Jam location. If the jam
message reappears after the jam is
cleared, paper is most likely jammed
at other location(s). Check the Jam
Error Codes Table on page 20 for
other check points and remove all
misfed paper.
6 7
(Ex.)
(Ex.)

19
Getting To Know
Your Machine
Rear Paper Tray Cover
Paper Tray
Rear Cover
Misfed Paper
Misfed Paper
Paper Tray
Front Cover
Drum Unit/Toner
Cartridge
34
5
6
3
6
4
5
8
8
ATTENTION
●Do not scratch or touch the surface of the
OPC Drum (Green) with bare hands. The
OPC Drum is sensitive to light. To prevent
optical exposure problems, do not expose the
OPC Drum to direct sunlight or bright light.
Front Cover
9
Misfed Paper
Remove Misfed Paper
ADF Cover
Paper Transport Knob
345
Remove Misfed Paper

20
Getting To Know Your Machine
Code Check Points
J70, Remove misfed paper(s) in the ADF.
J71, (See page 18)
J79,
J90,
J92,
J93
Code Check Points
J00 Remove paper from the Sheet Bypass.
Open and close the Front Cover.
J01, Pull out the paper tray(s) and remove the
J02 jammed paper from the tray(s).
Check to make sure the Paper Guides are
properly adjusted in the tray(s).
J43, Remove misfed paper(s) inside the unit.
J44, (See page 18)
J80,
J82,
J83
Code Check Points
U20 ADF Cover is open.
U21 ADF was opened while feeding a document.
U90 Battery requires replacement.
(See page 58)
Code Check Points
U01 Front Cover is open.
U13 Low Toner. (See page 16)
U16 Drum Unit/Toner Cartridge is not installed
correctly.
Operation Chart
■Problem Solving
●User Error Codes (U Code)
U01
U13
U16
U90
U20/U21
●Jam Error Codes (J Code)
NOTE: ●The J## Code indicates the most probable Jam location. If the jam message reappears after the jam is cleared,
paper is most likely jammed at other location(s). Check the Jam Error Codes Table above for other check points
and remove all misfed paper.
●Make sure that the Jam Error Code disappears after removing the misfed paper.
●The Jam Error Code will not disappear if the paper is still jammed in the machine. Check again and remove all
misfed paper.
1
2