Panasonic ER-GB30 User manual

© Panasonic Corporation 2012 Unauthorized copy-
ing and distribution is a violation of law.
Order NO.SD1206A39CE
Beard Trimmer
Model No. ER-GB30
ER-GB35
Asia
Middle East
TABLE OF CONTENTS
PAGE PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
5 Schematic Diagram ---------------------------------------------- 5
6 Exploded View and Replacement Parts List ------------ 6
6.1. Exploded View for ER-GB30 --------------------------- 6
6.2. Replacement Parts List for ER-GB-30 --------------- 7
6.3. Exploded View for ER-GB35 --------------------------- 8
6.4. Replacement Parts List for ER-GB-35 --------------- 9

ER-GB30/ER-GB35
2
1Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°). In case of using high temperature soldering
iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications
Power source DC 3.0 V(Two AAA (LR03) dry-cell batteries)
Usable time Continuously 50 minutes
Measurement L:14.4 ×W:4.3 ×D:3.4 (cm)
Weight 110g (including comb attachment and batteries)
Supplied accessories Comb attachment
Comb attachment for Underams / Bikini area (only for ER-GB35)
Cleaning brush
Oil

ER-GB30/ER-GB35
3
3 Troubleshooting Guide

ER-GB30/ER-GB35
4
4 Disassembly and Assembly Instructions
1. Remove the Comb attachment and an blade and battery
cover.
2. Remove the three screws.
3. Take out the housing B.
4. Remove the motor.
5. Remove the chassis.
6. Remove the switch chassis.

ER-GB30/ER-GB35
5
5 Schematic Diagram

ER-GB30/ER-GB35
6
6 Exploded View and Replacement Parts List
6.1. Exploded View for ER-GB30

ER-GB30/ER-GB35
7
6.2. Replacement Parts List for ER-GB-30
Safety Ref.
No.
Part No. Part Name & Description Quan-
tity
Remarks
1 WER9606E BLADE BLOCK 1
2 WER504L0167 SPRING FOR CUTTER 1ST (2PCS/PK)
3 WESSA60L6007 SCREW 3 K2-8
4 WERGB30K3058 HOUSING A 1 for BLACK MODEL
4 WERGB30A3058 HOUSING A 1 for BLUE MODEL
5 WERGB30K3068 HOUSING B 1 for BLACK MODEL
5 WERGB30A3068 HOUSING B 1 for BLUE MODEL
6 WERGB30L1008 DC MOTOR 1
7 WERGB30A3208 SWITCH HANDLE 1 for BLACK MODEL
7 WERGB30K3208 SWITCH HANDLE 1 for BLUE MODEL
8 WERGB30L3578 SWITCH CONTACT 1
9 WERGB30K0778 TERMINAL BLOCK 1 for BLACK MODEL
9 WERGB30A0778 TERMINAL BLOCK 1 for BLUE MODEL
10 WERGB30K3128 BATTERY COVER 1 for BLACK MODEL
10 WERGB30A3128 BATTERY COVER 1 for BLUE MODEL
11 WERGB30K7398 COMB ATTACHMENT 1
12 WERGB30H7048 CLEANING BRUSH 1
13 WES8196X7918 OIL 1
- WERGB30K8008 INDIVIDUAL BOX 1 for BLACK and ASIA MODEL
- WERGB30K8009 INDIVIDUAL BOX 1 for BLACK and MIDDLE EAST MODEL
- WERGB30A8008 INDIVIDUAL BOX 1 for BLUE and ASIA MODEL
- WERGB30K8108 OPERATING INSTRUCTIONS 1 for ASIA
- WERGB30K8109 OPERATING INSTRUCTIONS 1 for MIDDLE EAST

ER-GB30/ER-GB35
8
6.3. Exploded View for ER-GB35

ER-GB30/ER-GB35
9
6.4. Replacement Parts List for ER-GB-35
Safety Ref.
No.
Part No. Part Name & Description Quan-
tity
Remarks
1 WER9606E BLADE BLOCK 1
2 WER504L0167 SPRING FOR CUTTER 1ST (2PCS/PK)
3 WESSA60L6007 SCREW 3 K2-8
4 WERGB35H3058 HOUSING A 1
5 WERGB35H3068 HOUSING B 1
6 WERGB30L1008 DC MOTOR 1
7 WERGB30K3208 SWITCH HANDLE 1
8 WERGB30L3578 SWITCH CONTACT 1
9 WERGB35H0778 TERMINAL BLOCK 1
10 WERGB35H3128 BATTERY COVER 1
11 WERGB30K7398 COMB ATTACHMENT 1
12 WERGB30K7408 COMB ATTACHMENT FOR UNDER-
ARMS/BIKINI AREA
1
13 WERGB30H7048 CLEANING BRUSH 1
14 WES8196X7918 OIL 1
- WERGB35H8008 INDIVIDUAL BOX 1
- WERGB30K8108 OPERATING INSTRUCTIONS 1