Panasonic ER-GC30 User manual

ER-GC33/ER-GC30
2
1Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°). In case of using high temperature soldering
iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications
Power source AC 100-240V, 50-60Hz
Motor voltage 1.2V DC
Charging time 8 hours
Rated usable time with full-charging 40 minutes
Weight Approx. 180g (Main body)
Approx. 170g (Adaptor)
Supplied accessories 1-2mm comb attachment
3-4mm comb attachment
5-6mm comb attachment
Comb attachment for underarm (Only for ER-GC33)
Cleaning brush
Oil

ER-GC33/ER-GC30
3
3 Troubleshooting Guide
(Refer to Wiring Connection Diagram)

ER-GC33/ER-GC30
4
4 Disassembly and Assembly Instructions
4.1. Disassembly Instructions
1. Take out blade.
2. Loosen two screws at right and left side of springs and two screws on housing B.
3. To separate housing A and B with care for preventing breakage of hooks.
4. Take out motor from housing A.
5. Remove module assembly.
6. Remove switch handle.

ER-GC33/ER-GC30
5
4.2. Assembly Instructions
1. Assemble module block and motor into housing A.
Make sure of a position to be set “○” with both switch handle and switch contact at the rear side of module.
2. Confirm module block or motor to be set into housing A firmly, and then check its operation with connecting adaptor.
3. Assemble housing A and B with care for breakage of housing, and tighten four screws.

ER-GC33/ER-GC30
6
5 Wiring Connection Diagram
6 Schematic Diagram

ER-GC33/ER-GC30
9
7.3. Exploded View for ER-GC30

ER-GC33/ER-GC30
10
7.4. Replacement Parts List for ER-GC30
Safety Ref.
No. Part No. Part Name & Description Quantity Remarks
1 WERGC33K7458 COMB ATTACHMENT 1 1-2mm
2 WERGC33K7468 COMB ATTACHMENT 1 3-4mm
3 WERGC33K7478 COMB ATTACHMENT 1 5-6mm
4 WER9730E BLADE BLOCK 1
5 WERGC33K3108 SWITCH HANDLE 1
6 WERGC33K3118 CONNECTING PLATE 1
7 WERGC33K3058 HOUSING A 1
8 WERGC30K3068 HOUSING B 1
9 WER240B0166 BLADE MOUNTING SPRING 2
10 WERGC33K9008 SCREW 4 K2-8
11 WERGC33L2108 MODULE ASSEMBLY 1
12 WERGC33L2508 RECHARGEABLE BATTERY 1 Ni-MH TYPE
13 WERGC33L1008 MOTOR 1
14 WERGC33K7670 ADAPTOR 1 BF-3 PLUG
14 WERGC33K7675 ADAPTOR 1 C2 PLUG
15 WERGC20X7918 OIL 1
16 WES76806761 CLEANING BRUSH 1
- WERGC30K8008 INDIVIDUAL BOX 1
- WERGC30K8009 INDIVIDUAL BOX 1 only for Middle East
- WERGC33K8108 OPERATING INSTRUCTIONS 1