Panasonic S-80MW1E5 User manual

Operating Instructions
Air-to-Water Heatpump
Model No.
INDOOR UNIT
Air-to-Water Heatpump
(Type W1)
S-80MW1E5
S-125MW1E5
● Connectable outdoor unit lineup
This booklet is the operating
instructions for indoor unit. Regarding
the outdoor unit, see the operating
instructions supplied with the outdoor
unit.
OUTDOOR UNIT
3WAY VRF (Type MF2)
Panasonic Corporation
1006 Kadoma, Kadoma City, Osaka, Japan F570002
ENGLISH 2 ~ 13
Before operating the unit, read these operating instructions thoroughly and
keep them for future reference.
FRANÇAIS 14 ~ 25
Avant d’utiliser l’appareil, lisez ce mode d’emploi dans son intégralité et
conservez-le pour toute référence ultérieure.
ESPAÑOL 26 ~ 37
Antes de operar la unidad, lea atentamente estas instrucciones de
funcionamiento y guárdelas para futuras consultas.
DEUTSCH 38 ~ 49
Bevor Sie das Gerät in Betrieb nehmen, lesen Sie bitte diese
Bedienungsanleitung aufmerksam durch und bewahren Sie sie für die
künftige Verwendung auf.
ITALIANO 50 ~ 61
Prima di utilizzare l’unità, leggere a fondo queste istruzioni per l’uso e
conservarle come riferimento futuro.
NEDERLANDS 62 ~ 73
Lees deze gebruiksinstructies goed door voor u het apparaat gebruikt en
bewaar ze voor toekomstig gebruik.
PORTUGUÊS 74~ 85
Antes de utilizar o aparelho, leia completamente este manual de instruções
e guarde-o para futuras referências.
EΛΛΗΝΙΚΆ 86 ~ 97
Πριν θέσετε τη μονάδα σε λειτουργία, διαβάστε πολύ καλά αυτές τις οδηγίες
χρήσης και διατηρήστε τις για μελλοντική αναφορά.
БЪЛГАРСКИ 98 ~ 109
Преди да започнете експлоатация на този уред, прочетете внимателно
тези инструкции и ги запазете, за да можете да правите справки с тях и
в бъдеще.
TÜRKÇE 110 ~ 121
Üniteyi çalıştırmadan önce bu çalıştırma talimatlarını iyice okuyun ve
gelecekte başvurmak için saklayın.
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
NEDERLANDS
PORTUGUÊS
EΛΛΗΝΙΚΆ
БЪЛГАРСКИ
TÜRKÇE
OI_00_271368_Eng.indb 1 2015-7-2 9:14:16

2
 Safety Precautions ........................................................... 2
 Precautions for Use ......................................................... 4
 Names of Parts ................................................................. 5
 Initial Settings .................................................................. 7
 Operation .......................................................................... 8
• Operation Mechanism ................................................... 9
 Function of Air-to-Water Unit ........................................ 10
 Maintenance ................................................................... 12
• Before Requesting Services ....................................... 12
 Troubleshooting ............................................................. 13
 Specications ............................................................... 122
• Indoor unit .................................................................. 122
• Corresponding language table ................................. 123
Contents
Safety Precautions
Product Information
If you have problems or questions concerning your Air-to-
Water, you will need the following information. Model and
serial numbers are on the nameplate on the lid of the electrical
component box.
Model No.
Serial No.
Date of purchase
Dealer’s address
Phone number
Conrm to authorized dealer
or specialist on usage of
specied refrigerant type. Using
of refrigerant other than the
specied type may cause product
damage, burst and injury etc.
This Air-to-Water has no ventilator
for intaking fresh air from
outdoors. You must open doors or
windows frequently when you use
gas or oil heating appliances in
the same room, which consume a
lot of oxygen from the air.
Otherwise there is a risk of
suffocation in an extreme case.
Never use or store gasoline or
other ammable vapor or liquid
near the Air-to-Water — it is very
dangerous.
Do not use this appliance in a
potentially explosive atmosphere.
Never touch the unit with wet hands.
Do not insert your ngers or
other objects into the Air-to-
Water indoor or outdoor
unit, rotating parts may cause
injury.
If the refrigerant comes in contact
with a ame, it produces a toxic
gas.
For safety, be sure to turn the
Air-to-Water off and also to
disconnect the power before
cleaning or servicing.
Pull off the power plug from
a receptacle, or switch off
the breaker, or switch off the
power disconnecting mean to
isolate the Air-to-Water from the
main power supply in case of
emergency.
Do not clean inside the indoor and
outdoor units by users. Engage
authorized dealer or specialist for
cleaning.
In case of malfunction of this
appliance, do not repair by yourself.
Contact to the sales dealer or
service dealer for a repair.
The following symbols used in this manual, alert you to
potentially dangerous conditions to users, service personnel or
the appliance:
WARNING This symbol refers to a hazard or
unsafe practice which can result in
severe personal injury or death.
CAUTION
This symbol refers to a hazard or
unsafe practice which can result
in personal injury or product or
property damage.
Prohibited matters Matters to be
observed
Thank you for purchasing this Panasonic product.
This product is a commercial Air-to-Water unit.
Installation Instructions attached.
Be sure to read the operating instructions relevant to the
VRF system connected to this Air-to-Water and all appliances
connected to the VRF system.
• Read these Operating Instructions carefully before using
this Air-to-Water. If you still have any difculties or problems,
consult your dealer for help.
• This Air-to-Water is designed to give you comfortable
room conditions. Use this only for its intended purpose as
described in these Operating Instructions.
WARNING
OI_00_271368_Eng.indb 2 2015-7-2 9:14:17

3
ENGLISH
This appliance is intended to be used
by expert or trained users in shops,
in light industry and on farms, or for
commercial use by lay persons.
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe
way and understand the hazards
involved.
Keep the re alarm and the air outlet
at least 1.5m away from the unit.
Do not cool or heat the room too
much if babies or invalids are
present.
Do not turn the Air-to-Water on and
off from the power mains switch. Use
the ON/OFF operation button.
Do not stick anything into the air
outlet of the outdoor unit. This
is dangerous because the fan
is rotating at high speed.
Do not touch the air inlet or the
sharp aluminum ns of the
outdoor unit. You may get
injured.
Do not sit or step on the unit.
You may fall down accidentally.
Do not stick any object
into the FAN CASE. You
may be injured and the
unit may be damaged.
Provide a power outlet to be used
exclusively for each unit, and a
power supply disconnect, Earth
Leakage Circuit Breaker (ELCB)
or Residual Current Device (RCD)
for overcurrent protection should
be provided in the exclusive line.
Provide a power outlet
exclusively for each unit, and full
disconnection means having a
contact separation in all poles
must be incorporated in the xed
wiring in accordance with the
wiring rules.
To prevent possible hazards
from insulation failure, the
unit must be grounded.
Do not use modied
cord, joint cord,
extension cord or
unspecied cord to prevent
overheating and re.
Stop using the product when any
abnormality/failure occurs and
disconnect the power plug or turn
off the power switch and breaker.
(Risk of smoke/re/electric shock)
Examples of abnormality/failure:
• The ELCB trips frequently.
• The product sometimes does not
start when turned on.
• The power is sometimes
disconnected when the cord is
moved.
• Burnt odor or abnormal noise is
detected during operation.
• The body is deformed or
abnormally hot.
• Water leaks from the indoor unit.
• Power cord or plug becomes
abnormally hot.
• Fan speed cannot be controlled.
• The unit stops running
immediately even if it is switched
on for operation.
• The fan does not stop even if the
operation is stopped.
Contact immediately your local
dealer for maintenance/repair.
WARNING
CAUTION
• The compressor may occasionally stop during thunderstorms.
This is not a mechanical failure. The unit automatically
recovers after a few minutes.
• The English text is the original instructions. Other languages
are translation of the original instructions.
Important Information Regarding
The Refrigerant Used
This product contains uorinated greenhouse gases covered
by the Kyoto Protocol. Do not vent gases into the atmosphere.
Refrigerant type: R410A
GWP(1) value: 1975
(1) GWP = global warming potential
Periodical inspections for refrigerant leaks may be required
depending on European or local legislation. Please contact
your local dealer for more information.
NOTICE
OI_00_271368_Eng.indb 3 2015-7-2 9:14:18

4
Precautions for Use
Installation
 This Air-to-Water must be installed properly by qualied
installation technicians in accordance with the Installation
Instructions provided with the unit.
 Before installation, check that the voltage of the electric
supply in your home or ofce is the same as the voltage
shown on the nameplate.
WARNING
Avoid the following locations for installation.
 Locations where smoke or combustible gas exists.
Also locations of extremely high temperature such as a
greenhouse.
 Locations where excessively high heat-generating
objects are placed.
Attention:
 Avoid installing the outdoor unit where salty sea water can
splash directly onto it or in sulphurous air near a spa.
(To protect the Air-to-Water from heavy corrosion)
Wiring
 All wiring must conform to the local electrical codes.
(Consult your dealer or a qualied electrician for details.)
 Each unit must be properly grounded with a ground (or
earth) wire or through the supply wiring.
 Wiring must be done by a qualied electrician.
Operation Preparation
Turn the power mains on 5 hours before
the start of operation.
(For warm-up)
 Leave the power mains ON for continuous use.
ON
NOTE
Pull off the power plug from a receptacle, or switch off the
breaker, or switch off the power disconnecting mean to isolate
the Air-to-Water from the main power supply when not in use
for a long time.
Operation Condition
Use this Air-to-Water under the following temperature range.
Outdoor Unit Indoor (water) temperature
range
Outdoor
temperature
range
3WAY (Type MF2)
Cooling*1 14°C 25°C
(5°C 20°C) -10°C 46°C (*DBT)
Heating 15°C 30°C
(25°C 45°C)*2-20°C 35°C (*WBT)
Cooling &
Heating ― -10°C 35°C (*DBT)
*DBT: Dry bulb temperature *WBT: Wet bulb temperature
*1: Make sure to install the 2-way Valve in case that radiator/
oor heater is installed in the cooling circuit. If dew is
condensed on the radiator/oor heater at defrosting
operation, turn on the Air-to-Water in heating mode to
prevent condensation.
*2: When the water temperature is less than 25°C, preheat the
water over 25°C (operate only Air-to-Water unit).
Tips for Energy Saving
Avoid
 Do not block the air intake and outlet or water
intake and outlet of the unit.
(If either is obstructed, the unit will not function
well, causing malfunction.)
 During cooling operation, use sunshades, blinds or
curtains to prevent direct sunlight from entering the
room.
Do
 Always keep the water clean.
(A luck of water ow will impair the performance of the unit.)
→ “Maintenance” (P.12)
 To prevent conditioned air from escaping, keep
windows, doors and any other openings closed.
Information for Users on Collection and Disposal of
Old Equipment and Used Batteries
These symbols on the products, packaging,
and/or accompanying documents mean that
used electrical and electronic products and
batteries should not be mixed with general
household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC and
2006/66/EC.
By disposing of these products and batteries correctly,
you will help to save valuable resources and prevent
any potential negative effects on human health and
the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of
old products and batteries, please contact your local
municipality, your waste disposal service or the point of
sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic
equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside
the European Union]
These symbols are only valid in the European Union.
If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method
of disposal.
Pb
Note for the battery symbol (bottom two
symbol examples):
This symbol might be used in combination with
a chemical symbol. In this case it complies
with the requirement set by the Directive for
the chemical involved.
OI_00_271368_Eng.indb 4 2015-7-2 9:14:19

5
ENGLISH
Names of Parts
INDOOR UNIT
High-spec Wired Remote Controller (Optional: Model No. CZ-RTC5)
Menu screen
Water drain Water outlet
Water inlet
℃
TANK
SET TEMP.
7
20:30 (THU) HOT-WATER-SUPPLY
Return button
Returns to the previous screen.
Energy saving
button
Switches Energy
saving/Normal
operation.
Enter button
Fixes the selected content.
Press centre No glove No pen
Start/Stop button
Starts/Stops operation.
Operation indicator
Illuminates during operation.
Blinks during alarm.
Cross key buttons
Selects an item.
Note
Menu button
Displays the menu
screen
LCD screen
Left Right
Up
Down
Menu
1. Basic instructions
2. FLAP
3. Lock indiv. flap
4. ON/OFF timer
Sel. Page [ ] Confirm
20:30 (THU)
Screen name Present time & day
Operation guide
The currently operable content is simply displayed.
• ▲▼◄►: Cross key buttons
• : Enter button
OI_00_271368_Eng.indb 5 2015-7-2 9:14:19

6
M
OFF
7
7
M
OFF
℃ ℃
MODE
HEAT
SET TEMP.
7
20:30 (THU) AIR-CONDITIONING
Icon Description
It is able to set Water Out Temperature.
It is able to set Room Temperature from thermo
sensor (RC thermo or remote sensor thermo).
Thermo sensor (RC thermo or remote sensor
thermo) is abnormal.
It is able to set Offset value of Heating Curve
Function. (only heating mode)
Icon Description
Switching operation modes is prohibited.
(Switching to Auto mode is also prohibited.)
Remote control operation is restricted by a central control device.
[ON/OFF timer] is set.
[Weekly timer] is set.
Energy saving operation is in process.
Icon Description
Switching operation modes is prohibited.
(Switching to Auto mode is also prohibited.)
Remote control operation is restricted by a central control device.
[ON/OFF timer] is set.
[Weekly timer] is set.
Energy saving operation is in process.
Icon Description
It is able to set Water Out Temperature.
Icon Description
Internal heater is active.
Internal heater is abnormal.
Internal heater is manually in process.
Internal heater is not in process.
Control to prevent water freezing is active.
External device ready demand*1
External device notice*2
External pump is active.
Water is under sterilization.
Icon Description
Internal heater is active.
Internal heater is abnormal.
Internal heater is manually in process.
Internal heater is not in process.
Control to prevent water freezing is active.
External pump is active.
Operation
mode
Operation
mode
The indoor unit is stopped or slight blow
operation is in process.
Set temperature (water)
Set temperature
Water out temperature
Setting information icons displayed on the top screen
Setting information icons displayed on the top screen
Names of Parts
TANK mode
Air-Conditioning mode
*1 When the heat capacity for Air-to-Water is insufcient, output signal is sent
to the external device.
*2 When the notice is input from the external device, the icon appears on the
wired remote controller.
OI_00_271368_Eng.indb 6 2015-7-2 9:14:20

7
ENGLISH
START[ ]
20:30 (THU)
1. Basic instructions
Menu
2. FLAP
3. Lock indiv. flap
4. ON/OFF timer
Sel. Page [ ] Confirm
20:30 (THU)
Menu
11. Initial settings
9. Power consumption monitor
10. Energy saving
8. Quiet operation
Sel. Page [ ] Confirm
20:30 (THU)
Initial settings
1. Clock
2. Clock type
3. Controller name
4. Operation lock
Sel. Page [ ] Confirm
20:30 (THU)
Operation lock
Lock MODE
Lock all keys
Lock SET TEMP.
Sel./
20:30 (THU)
Lock START/STOP
Clock
Year/Month/Day Hour : Min
/ /5 16
2013 20 : 30
Change
Month
20:30 (THU)
[ ] Confirm
Change
Clock type 8:30PM (THU)
AM/PM
Operation lock
Lock MODE
Lock all keys
Lock SET TEMP.
Sel./
20:30 (THU)
Lock START/STOP
Lock all keys?
Hold [ ] for 4 s. to unlock
YES NO
1Display the menu screen.
 To return to the previous screen
Press .
 To return to the top screen
Press 2 times.
2Select [Initial settings].
→
3Select the item to set.
→
Clock
4Set the date and time.
→ → →
(Repeat) (Press 2 times
to nish.)
Clock type
4Select the type to display.
→ →
(Press 2 times to nish.)
Operation lock
4Select the type of lock and set to
[].
→ →
(Press 2 times
to nish.)
 To cancel lock
Select [-] in step 4.
 Only for [Lock all keys]
Select [YES].
→
Initial Settings
Clock Clock type  Operation lock
When applying a power on for the rst time, it is necessary to initialize the remote controller for Air-to-Water unit.
Please refer to the installation instructions or consult the contractor.
* The Air-to-Water function is not
applicable to the feature list No.2,
No.3, No.6, No.7, No.10, No.11 and
No.12 at the Menu screen (in TANK
mode and Air-Conditioning mode).
2. FLAP
3. Lock indiv. ap
6. Filter info
7. Outing function
10. Energy saving
11. Initial settings
Operation lock
Lock MODE
(only TANK mode)
Lock FAN SPEED
Lock FLAP
Temp sensor
Main/sub
Vent output
12. Ventilation
Menu
11. Initial settings
9. Power consumption monitor
10. Energy saving
8. Quiet operation
Sel. Page [ ] Confirm
20:30 (THU)
This function is disabled.
[ ] Close
AM/PM
24 h
OI_00_271368_Eng.indb 7 2015-7-2 9:14:23

8
1 Start Operation
Press
(The operation indicator illuminates.)
2 Change the temperature setting
Press
(In TANK mode, only “SET TEMP.” can be changed. : 35°C to 65°C)
(The cursor disappears.)
[Heating Curve Function] (Only heating mode)
Supply water temperature is adjusted automatically, according to outdoor temperature.
Supply water temperature is able to adjust manually by changing offset value.
1 Start Operation
Press
(The operation indicator illuminates.)
2 Change the setting
Press
 Set temperature
Press
(When the cursor is not visible.)
Water temperature
Cool : 5°C to 20°C
Heat (With use of Heating Curve) : -5°C to +5°C (offset)
℃
TANK
SET TEMP.
7
20:30 (THU) HOT-WATER-SUPPLY
Operation
Water Temperature
 To change the setting
 To stop
(The operation indicator turns off)
Operation indicator
℃
SET TEMP.
7
20:30 (THU) AIR-CONDITIONING
MODE
HEAT
℃
MODE
HEAT
SET TEMP.
7
20:30 (THU) AIR-CONDITIONING
℃
SET TEMP.
7
20:30 (THU) AIR-CONDITIONING
MODE
COOL
Under Heating Curve Control
 To change the setting
 To stop
(The operation indicator turns off)

Case: With use of Heating Curve Function.
Operation indicator
[Normal mode] With no use of Heating Curve Function.
Supply water temperature can be set.
1 Start Operation
Press
(The operation indicator illuminates.)
2 Select the item to set
Press
3 Change the setting
Press
Water Temperature
 To change the setting
 To stop
(The operation indicator turns off)

Case: With no use of Heating Curve Function.
Operation indicator
℃
SET TEMP.
7
20:30 (THU)
MODE
HEAT
AIR-CONDITIONING
℃
SET TEMP.
7
20:30 (THU) AIR-CONDITIONING
MODE
HEAT
℃
MODE
HEAT
SET TEMP.
7
20:30 (THU) AIR-CONDITIONING
℃
SET TEMP.
7
20:30 (THU) AIR-CONDITIONING
MODE
COOL
TANK mode
Air-Conditioning mode
OI_00_271368_Eng.indb 8 2015-7-2 9:14:25

9
ENGLISH
 Operation mode (e.g. Cool, Heat)
Press
Cool Heat
 Set temperature
Press
(When the cursor is not visible.)
Water temperature
Cool : 5°C to 20°C
Heat (With no use of Heating Curve) : 25°C to 45°C
Room temperature (With use of remote controller
thermo)
Cool : 18°C to 30°C
Heat : 16°C to 30°C
℃ ℃
MODE
HEAT
SET TEMP.
7
20:30 (THU) AIR-CONDITIONING
℃
SET TEMP.
7
20:30 (THU) AIR-CONDITIONING
MODE
COOL
℃
SET TEMP.
7
20:30 (THU)
MODE
HEAT
AIR-CONDITIONING
℃
SET TEMP.
7
20:30 (THU) AIR-CONDITIONING
MODE
COOL
℃
SET TEMP.
7
20:30 (THU)
MODE
HEAT
AIR-CONDITIONING
Operation Mechanism
Heating Performance
 Since this Air-to-Water utilizes outside air for heating, its
heating performance deteriorates as outdoor temperature
decreases. (Due to heat pump system) Information
called “External device ready demand” is outputted from
terminal of electrical component box.
Use another heating appliance using this information, etc.
 It will take some time until the supplied water temperature
becomes warmer after heating operation started.
Defrosting
 This appliance may start defrosting operation to melt
frost form in the outdoor unit during long hour heating
operation mode.
The indoor unit including Air-to-Water will stop for about 5
to 10 minutes at this time.
Heating Standby
The remote controller shows “ ” (Heating standby) on the
display in the following mode and heating capacity will be
limited.
 When operation started (Indoor unit fan stops for
maximum 6 minutes.)
 When Thermostat activated
 When defrosting
When Heating Operation Started
(Only 3WAY VRF)
When changed to heating mode from stopped or cooling
operation mode, the unit does not work for about 3 minutes
for the sake of self-protection.
It may take about 5 to 10 minutes until the hot water is
delivered after starting the heating operation.
Oil Recovery
The water pump may run at a slow speed in order to
recover the oil in the system every 1 to 3 hours during
cooling or heating operation.
The unit will automatically resume the original operation
after about 5 to 10 minutes.
Remote Control Sensor
The temperature sensor in the Air-to-Water normally senses
the water temperature and can also sense the ambient
temperature of the remote controller. (room temperature)
For the details, consult the shop you purchased.
Should the power failure occurs while the
unit is running
When the unit automatically resumes operation after
temporary power failure, it uses the same settings before
the power was cut off.
NOTE
• Group control function cannot be used for the Air-to-Water unit.
Be sure to conrm the individual remote controller connection is used for each Air-to-Water unit.
•
If your heating appliance is a radiator or oor heating, dew may be condensed on the appliance during defrosting
operation.
In that case, turn on the Air-to-Water in heating mode to prevent condensation.
OI_00_271368_Eng.indb 9 2015-7-2 9:14:25

10
Sterilization timer
Int. heater forced ON
20:30 (THU)
Air-to-Water unit
Stop sterilization
Sel. [ ] Set
Stop sterilization?
NOYES
START[ ]
20:30 (THU)
1. Basic instructions
Menu
2. FLAP
3. Lock indiv. flap
4. ON/OFF timer
Sel. Page [ ] Confirm
20:30 (THU)
Menu
14. Air-to-Water unit
12. Ventilation
13. Setting list
11. Initial settings
Sel. Page [ ] Confirm
20:30 (THU)
Heating curve range
Int.heater forced ON
Sel./
20:30 (THU)
Air-to-Water unit
Int.heater ON/OFF
Stop sterilization
Int.heater forced ON
Sel./
20:30 (THU)
Air-to-Water unit
Sterilization timer
[] Set
Air-to-Water unit
Start day and time
SUN 0 : 00
Change
Hour
20:30 (THU)
Stop sterilization
Int.heater forced ON
Sel./
20:30 (THU)
Air-to-Water unit
Sterilization timer
[] Set
1 Display the menu screen.
2 Select
[14. Air-to-Water unit].
→
3 Select the item
to set.
→
TANK mode
Sterilization timer
To prevent propagation of legionella bacterium in the tank, it is able to perform sterilization process once a week.
While the sterilization process is performed, icon appears.
● Timer Setting
● Under Sterilization process
Target water out temperature for sterilization (If
the set temperature is higher than temperature for
sterilization, the set temperature is displayed.)
Under Sterilization
Stop sterilization
Under unavoidable circumstances, this function is enabled when
the Air-to-Water unit must be stopped. The display on the right
appears.
 TANK mode
 Air-Conditioning mode
20:30 (THU)
HOT-WATER-SUPPLY
℃
TANK
SET TEMP.
Sterilizing
[ ] Close
If “Sterilization timer” is enabled , the screen is switched to set the day
of the week and time for sterilization process.
Set the day of the week and time for sterilization process.
Select the item by
button and decide by button.
* Under sterilization, the set temperature
cannot be changed.
* It takes a maximum of 4 hours to nish the sterilization process.
Caution: Be careful. Hot water may lead to a burn injury.
* It is recommended to set the time not to overlap with other timer such as weekly timer.
* In the centralized controller, the set temperature of normal operation is displayed even during
sterilization.
Although it is able to change the set temperature or turn ON/OFF by the centralized
controller, sterilization process will continue.
If the Air-to-Water unit is stopped by the centralized controller during sterilization process, the
Air-to-Water unit will be stopped after sterilization process.
Function of Air-to-Water Unit
OI_00_271368_Eng.indb 10 2015-7-2 9:14:27

11
Air-Conditioning mode
 Int. heater ON/OFF
The internal heater of Air-to-Water unit can be disabled.
When the internal heater is disabled,
OFF
icon appears.
Press button to switch ON/OFF.
* This function is effective only for Air-Conditioning mode.
In the TANK mode, it is not able to select “OFF”.
 Heating curve range
It is able to select Heating curve range to automatically adjust
the water out temperature with the outdoor temperature.
+5
-5
±0
Outdoor
Temp.
Water Out
Temp.
WA
WB
TA TB
Shift range
Heating curve range
WB
TA
TB
WA
Sel. [ ] Set
20:30 (THU)
Heating curve range
WB: Water out temp. (Lo)
20:30 (THU)
[ ] Confirm
Change
45 °C
25 °C
-5 °C
20 °C
°C
The initial setting is “±0” as
the set temperature. Water
out temperature can be
changed (shift) from ‘-5’ to
‘+5’ as the set temperature.
The Shape of Heating curve range is able to change at menu screen.
Select the temperature to change by button.
Press button, it is able to change the selected temperature.
Temperature range
WA 25~45◦C
WB 25~45◦C
TA -20~15◦C
TB 15~25◦C
The centralized controller displays the target water out temperature.
It is only displayed information. It is not able to change the target water
out temperature by the centralized controller.
 Int. heater forced ON
The internal heater of Air-to-Water unit can be turned ON manually.
When the internal heater is turned ON manually,
M
icon appears.
*
This feature is for emergency operation when the outdoor unit has trouble.
Contact to service technician denitely before setting this function.
* Password will be required before setting this function.
Press , button and select “Set” for forced ON.
Press button after checking the conrmation screen.
ENGLISH
 Int. heater forced ON
The internal heater of Air-to-Water unit can be turned ON manually.
When the internal heater is turned ON manually,
M
icon appears.
*
This feature is for emergency operation when the outdoor unit has trouble.
Contact to service technician denitely before setting this function.
* Password will be required before setting this function.
Press , button and select “Set” for forced ON.
Press button after checking the conrmation screen.
Air-to-Water unit
Int.heater forced ON
20:30 (THU)
[ ] Confirm
Change
Set
Air-to-Water unit
Int.heater forced ON
20:30 (THU)
[ ] Confirm
Change
Set
OI_00_271368_Eng.indb 11 2015-7-2 9:14:29

12
WARNING
 For safety, be sure to turn the Air-to-Water off and
disconnect the power before cleaning.
(Otherwise, electric shock or injury may result because
the fan is rotating at high speed.)
 Do not pour water on the indoor unit excluding water
circuit.
(This may damage the internal components and cause
an electric shock hazard.)
Maintenance
Symptom Cause Action
The Air-to-Water
unit does not
operate although
the power is
turned on.
Power failure or after power failure Press the power ON/OFF button on the remote controller.
The operation (power) button is turned off.
• If the breaker is turned off, turn the power on.
• If the breaker has been tripped, consult your dealer
without turning it on.
Fuse blow out. Contact your dealer.
Poor cooling
or heating
performance
Water circuit of indoor unit is clogged with
dust or obstacles. Remove dust or obstruction.
Water temperature is very cold (heating). Preheat the water over 25°C. (operate only Air-to-Water
unit)
The air intake or air outlet of outdoor units
is clogged with dust. Remove the dust.
Improper temperature settings
See “Tips for Energy Saving”. (P.4)
The room is exposed to direct sunlight in
cooling mode.
Doors or windows are open.
Too many heat sources in cooling mode. Use minimum heat sources and in a short time.
Too many people in the room in cooling
mode. Lower the temperature setting.
If your Air-to-Water unit does not work properly even after checking each item of “Before Request-
ing Services” and “Troubleshooting”

Stop the operation immediately and turn the power off. Then contact your dealer and report the serial number and symptom.
You also report if the inspection mark and the letters E, F, H, L, P in combination with numbers appear on the LCD of the
remote controller.
 Never repair the Air-to-Water unit by yourself since it is very dangerous for you to do so.
Before Requesting Services
CAUTION
 Never use solvents or harsh chemicals. Also, do not wipe
plastic parts using very hot water.
(This may cause deformation or change in colour.)
 Some metal edges and ns are sharp. Be careful when
you clean those parts.
(Injury may result.)
 Use a rm stool or ladder when cleaning an indoor unit
installed in high locations.
Do not attempt to clean inside the unit by yourself.
Refer to the section “Care and Cleaning” in the Installation Instructions.
OI_00_271368_Eng.indb 12 2015-7-2 9:14:30

13
ENGLISH
Troubleshooting
Symptom Cause / Action
Indoor unit
Noise
Sound like streaming water is heard
during operation or after operation.
• Sound of water owing inside unit
• Sound of refrigerant liquid owing inside unit
• Sound of drainage water through drain pipe
Cracking noise is heard during operation
or when operation stops. Sound due to temperature changes of parts
Dewdrops accumulate near bottom during
cooling operation. • Cold water accumlates dewdrop on the water piping.
Outdoor unit
No operation
(When the power is turned on immediately /
When operation is stopped and resumed
immediately)
• Operation is not activated for the rst approx. 3 minutes
because the compressor protection circuit is activated.
Noise occurs during heating operation.
• Defrost operation is in process.
Steam comes out during heating operation.
The fan continues to rotate even after the
operation is stopped using the remote
controller.
• This is for smooth operation.
Error code
Code How to Release
E03 Remote controller communication error Automatic
E04 Abnormal indoor/outdoor communication error Automatic
F01 Abnormal refrigerant sensor 1 (E1) Automatic
F02 Abnormal water outlet sensor 1 (E2) Automatic
F03 Abnormal refrigerant sensor 2 (E3) Automatic
F10 Abnormal water intlet sensor (TA) Automatic
F11 Abnormal water outlet sensor 2 (BL) Automatic
L13 Mismatched indoor unit Reset (On and off of the power supply)
L16 Test run for water circuit is not nished Do test run for water circuit
L25 Unmatched remote controller Reset (On and off of the power supply)
P07 Abnormal Internal heater overload Cancel from the remote controller
P09 Abnormal water ow Re-run
P12 Abnormal water pump speed Re-run
Check before consulting or requesting services.
OI_00_271368_Eng.indb 13 2015-7-2 9:14:30

122
Specications
Air-to-Water Heatpump (Type W1)
Model Name S-80MW1E5 S-125MW1E5
Power Source 220 / 230 / 240 V ～ 50Hz
Cooling capacity kW 8.0 12.5
BTU/h 27,000 42,700
Heating capacity kW 9.0 14.0
BTU/h 30,000 47,800
Sound Pressure
level dB(A) 37 40
Sound Power level dB(A) 50 53
Unit Dimensions
(H×W×D) mm 892×502×353 892×502×353
Net weight kg 45 45
Indoor unit
OI_00_271368_Eng.indb 122 2015-7-2 9:14:30

123
Corresponding language table
English Français Español Deutsch
Air-to-Water Heatpump
(Type W1)
Conduit Mince Faible Statique
(Type W1)
Conductos nos de presión
estática baja (tipo W1)
Flaches Kanalgerät mit
niedriger statischer Pressung
(Typ W1)
3WAY (Type MF2) 3WAY (Type MF2) 3WAY (tipo MF2) 3WAY (Typ MF2)
English Italiano Nederlands Português
Air-to-Water Heatpump
(Type W1)
Sottile a condotto a bassa
pressione statica (tipo W1)
Slim lage statische druk kanaal
(type W1)
Estática baixa na no tubo
(Tipo W1)
3WAY (Type MF2) 3WAY (tipo MF2) 3WAY (type MF2) 3WAY (Tipo MF2)
English Ελληνικη Български Türkçe
Air-to-Water Heatpump
(Type W1)
Αγωγός χαμηλής στατικής
πίεσης λεπτού τύπου
(Τύπος W1)
Тънък нисък статичен с
канали (тип W1)
İnce Düşük Statik Kanal Tipi
(W1 tipi)
3WAY (Type MF2) 3WAY (Τύπος MF2) 3WAY (тип MF2) 3WAY (MF2 tipi)
Specications
OI_00_271368_Eng.indb 123 2015-7-2 9:14:30

124
Corresponding language table
English Français Español Deutsch
Model Name Nom du modèle Nombre del modelo Modellbezeichnung
Power Source Source d'alimentation Fuente de alimentación Spannungsquelle
Cooling Capacity Capacité de refroidissement Capacidad de refrigeración Kühlleistung
Heating Capacity Capacité de chauffage Capacidad de calefacción Heizleistung
Sound Pressure Level Niveau de pression sonore Nivel de presión acústica Schalldruckpegel
Sound Power Level Niveau de puissance sonore Nivel de potencia acústica Schallleistungspegel
Unit Dimensions
(HxWxD; mm)
Dimensions d'unité
(HxLxP ; mm)
Dimensiones de la unidad
(Alto x Largo x Ancho; mm)
Geräteabmessungen
(H x B x T [mm])
Net Weight (kg) Poids net (kg) Peso neto (kg) Nettogewicht (kg)
English Italiano Nederlands Português
Model Name Modello Modelnaam Nome do modelo
Power Source Fonte di alimentazione Voeding Fonte de alimentação
Cooling Capacity Capacità di raffreddamento Koelingscapaciteit Capacidade de arrefecimento
Heating Capacity Capacità di riscaldamento Verwarmingscapaciteit Capacidade de aquecimento
Sound Pressure Level Livello di pressione acustica Geluidsdrukniveau Nível da pressão do som
Sound Power Level Livello di potenza acustica Geluidsvermogenniveau Nível da potência de som
Unit Dimensions
(HxWxD; mm)
Dimensioni unità
(AxLxP; mm)
Afmetingen van de unit
(H x B x D; mm)
Dimensões da unidade
(AxLxP; mm)
Net Weight (kg) Peso netto (kg) Nettogewicht (kg) Peso líquido (kg)
English Ελληνικη Български Türkçe
Model Name Όνομα μοντέλου Наименование на модел Model Adı
Power Source Πηγή ισχύος Захранване Güç Kaynağı
Cooling Capacity Δυνατότητα ψύξης Охлаждаща мощност Soğutma Kapasitesi
Heating Capacity Δυνατότητα θέρμανσης Отоплителна мощност Isıtma Kapasitesi
Sound Pressure Level Επίπεδο πίεσης ήχου Ниво на звуково налягане Ses Basınç Düzeyi
Sound Power Level Επίπεδο ισχύος ήχου Ниво на сила на звука Ses Güç Düzeyi
Unit Dimensions
(HxWxD; mm)
Διαστάσεις μονάδας
(ΥxΠxΒ, mm)
Размери на модула
(ВхШхД, мм)
Ünite Boyutları (YxGxD; mm)
Net Weight (kg) Καθαρό βάρος (kg) Нетно тегло (кг) Net Ağırlık (kg)
OI_00_271368_Eng.indb 124 2015-7-2 9:14:30

125
MEMO
OI_00_271368_Eng.indb 125 2015-7-2 9:14:30

126
MEMO
OI_00_271368_Eng.indb 126 2015-7-2 9:14:30

127
MEMO
OI_00_271368_Eng.indb 127 2015-7-2 9:14:30

Panasonic Corporation
Website: http://www.panasonic.com
Printed in Malaysia
© Panasonic Corporation 2015 F570002
BE0715-0
Authorised representative in EU
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
OI_00_271368_Eng.indb 128 2015-7-2 9:14:30