Panasonic Viera TC-L42E3 User manual

Pa.aso.ic
Model No.
NOmero de modelo
TC=L42E3
IEnglish
IEspaSol
I hank you for purchasing this Panasonic product,
Please read these instructions before operating your set and retain them for future
reference. The images shown in this manual are for illustrative purposes only.
I Gracias pot su decision de comprar este producto marca Panasonic.
Lea estas instrucciones antes de utilizar su televisor y gu&rdelas para consultarlas en
el futuro. Las imagenes mostradas en este manual tienen solamente fines ilustrativos. TQB2AA0620

Experience
multi ia an amazing excitement level of
2

V Lir k V,ERA,inkT°,satrademarkof
Panasonic Corporation.
H ::lm| HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC in the United
States and other countries.
SDXC Logo is a trademark of SD-
3C, LLC.
AVCI4iD o "AVCHD" and the "AVCHD" logo
are trademarks of Panasonic
Corporation and Sony Corporation.
DLNA _, the DLNA Logo and DLNA
CERTIFIED TMare trademarks,
service marks, or certification
marks of the Digital Living Network
Alliance.
This product qualifies for ENERGY
STAR in the "Home Use" setting
and this is the setting in which
energy savings will be achieved.
Any modifications to the "Home
Use" setting or other factory default
settings could result in greater
energy consumption beyond
levels that meet ENERGY STAR
qualifications.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
HDAVl Control TM is a trademark of Panasonic Corporation.
IMASEVIEWER
This product is licensed under the AVC patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC
Standard ("AVC Video") and/or (ii) decode AVC Video
that was encoded by a consumer engaged in a personal
and non-commercial activity and/or was obtained from a
video provider licensed to provide AVC Video. No license
is granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC.
See http://www, mpegla.com.
Please read before using the unit
® Safety Precautions ......................................... 4
Getting started
• AcCessoriesiOptionalAccessory,::i.:::.::::::i..:7
® Connections.
® dentfyng Contro s:.:,.i;,ii:.i:.. :i :::i..:.:i.i... :i 11
® F rst T me Setup .......................................... 12
Basic Features
_ Watching TV ................................................. 17
® Using VIERATOOLS ................................... 20
_ Watching content from external devices ...... 21
® Using Media player ...................................... 22
Advanced Features
_ VIERA Link TM"HDAVi Control TM''................... 28
® Using Network services ............................... 34
Network Connections .................................. 35
Network settings ......................................... 36
Using EASY IPTV ....................................... 39
Using DLNA feature .................................... 40
Network Camera ......................................... 41
_ Editing and Setting Channels ....................... 42
® How to Use Menu Functions ........................ 44
Picture settings ........................................... 45
Audio settings ............................................. 46
Timer settings ............................................. 46
Lock ............................................................ 47
Closed caption ............................................ 47
Setup .......................................................... 48
Support Information
® Ratings List for parental control ................... 49
® Technical information ................................... 50
® Care and Cleaning ....................................... 54
® Specifications ............................................... 55
® Frequently Asked Questions (FAQ) ............. 56
® index ............................................................ 59
® Limited Warranty
(for U.S.A. and Puerto Rico only) ................. 60
® Customer Services Directory
(for U.S.A. and Puerto Rico) ........................ 61
® Limited Warranty (for Canada) ..................... 62
3

Safety Precau ions
CAUTION
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
._ Thelightningflashwitharrowhead
withinatriangleisintendedtotellthe
userthatpartsinsidetheproductarea
riskofelectricshocktopersons.
._ Theexclamati0npointwithina
triangleisintendedtotell the
userthatimportantoperatingand
servicinginstructionsarein the
paperswiththeappliance.
This reminder is provided to direct the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the LCD
TV and to protect it from overheating. These openings must not be blocked or covered. There should be at least 10 cm of space
around the TV. The openings should never be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface. This
LCD TV should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11) Only use attachments /accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart /apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied15)
16)
17)
to your home consult your television dealer or local power company.
Follow all warnings and instructions marked on the LCD TV.
Never push objects of any kind into this LCD TV through cabinet
slots as they may touch dangerous voltage points or short out parts EXAMPLE OF ANTENNA
that could result in a fire or electric shock. Never spill liquid of any GROUNDING AS PER
kind on the LCD TV. (NEC) NATIONAL
18) If an outside antenna is connected to the television equipment, ELECTRICAL
CODE LEAD-IN WIRE
be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges.
In the U.S. Section 810-21 of the National Electrical Code
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
ANTENNA
DISCHARGEUNIT
(NECSECTION810-20)
GROUNDING
CONDUCTORS
(NECSECTION810-21)
\ GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
4

19) An outside antenna system should not be located in the vicinity of overhead power lines, other electric light, power circuits, or
where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as contact with them might be fatal.
20) Unplug this LCD TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the LCD TV.
c. If the LCD TV has been exposed to rain or water.
d. If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore the
LCD TV to normal operation.
e. If the LCD TV has been dropped or the cabinet has been damaged.
f. When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
21 ) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that
have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.
22) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.) ABOVE THE SET
(INCLUDING ON SHELVES ABOVE, ETC.).
23) WARNING: SMALL PARTS CAN PRESENT CHOKING HAZARD IF ACCIDENTALLY SWALLOWED. KEEP SMALL
PARTS AWAY FROM YOUNG CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, INCLUDING PACKAGING MATERIALS AND
PLASTIC BAGS/SHEETS TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG CHILDREN,
CREATING THE POTENTIAL RISK OF SUFFOCATION.
24) WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all
times
25) CAUTION: The Power switch on this unit will not completely shut off all power from AC outlet. Since the power
cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to
shut down all power.
Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from AC outlet
in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when
left unused for a long period of time (for example, when on vacation).
26) CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS PLUG WITH ARECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
27) CAUTION: USE WITH OTHER STAND MAY RESULT IN INSTABILITY POSSIBLY CAUSING INJURY.
28) CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE.
5

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by
Panasonic Corp. of North America could void the user's authority to operate this device.
FCC Declaration of Conformity
Model No. TC-L42E3
Responsible Party:
Contact Source:
email:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Consumer Electronics Company
1-877-95-VIERA (958-4372)
[email protected]
Flat panel displays are not always supported on the
proper stands or installed according to the manufacturer's
recommendations. Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers,
chests or carts may fall over and may cause personal injury or
even death.
The consumer electronics industry (of which Panasonic is
a member) is committed to making home entertainment
enjoyable and safe. To prevent personal injury or death, be
sure to follow the following safety guidelines:
TUNE INTO SAFETY:
* One size does NOT fit all. Follow the manufacturer's
recommendations for the safe installation and use of your
flat panel display.
* Carefully read and understand all enclosed instructions for
proper use of this product.
* Don't allow children to climb on or play with furniture and
television sets.
* Don't place flat panel displays on furniture that can easily be
used as steps, such as a chest of drawers.
* Remember that children can become excited while watching
a program, especially on "larger than life" flat panel
displays. Care should be taken to install the display where it
cannot be pushed, pulled over, or knocked down.
* Care should be taken to route all cords and cables
connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT
YOUR FLAT PANEL DISPLAY, ALWAYS:
* Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory
(such as UL, CSA, ETL).
* Follow all instructions supplied by the display and wall
mount manufacturers.
* If you have any doubts about your ability to safely
install your flat panel display, contact your retailer about
professional installation.
* Make sure the wall where you are mounting the display
is appropriate. Some wall mounts are not designed to
be mounted to walls with steel studs or old cinder block
construction. If you are unsure, contact a professional
installer.
* A minimum of two people are required for installation. Flat
panel displays can be heavy.
Panasonic recommends that a qualified installer perform
the wall-mount installation. See page 7.
The American Academy of Pediatrics discourages
television viewing for children younger than two years
of age.
6

Accessories/Optional Accessory
Check you have all the items shown.
[] Remote Control [] Batteries for the [] Pedestal
Transmitter Remote Control e TBL5ZX0037
e N2QAYB000570 Transmitter (2)
e AA Battery
How to assemble (p. 8)
[] Owner's Manual [] Child safety
[] Quick Start Guide [] Product Registration Card (U.S.A.)
fOptional Accessory Please contact professional installer to purchase the recommended UL qualified
wall-hanging bracket. For additional details, please refer to the wall-hanging
bracket installation manual.
Back of the TV
Holes for wall-hanging bracket
installation
%crew for fixing the TV onto the
wall-hanging bracket
(not supplied with the TV)
Depth of screw:
Minimum: 0,24 " (6,0 ram)
MMaximum: 0.71 " (18.0 ram)
........... 6
(View from the side)
\
WARNING )
@ Always be sure to ask a qualified technician to carry out set-up.
e Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) which typically give off
high heat. Doing so may warp or damage plastic cabinet parts.
e Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall
before hanging bracket.
e To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.
e Incorrect wall-hanging bracket or incorrect fitting may cause equipment to fall, resulting in injury and product damage.
e Panasonic disclaims liability for any damage or injury arising from incorrect wall-hanging bracket, incorrect fitting or
otherwise failure to follow the above instructions.
®
3>
o
o
@
o0
03
o
@
co
0
o
3>
o
o
@
0)
©
-2
7

reAssembling the pedestal
f_
® Fix securely with assembly screws _A_,(Total 4 screws).
® Tighten screws firmly.
Front
bracket
not to fall over
reSet-up
_ Fix securely with assembly screws (_ (Total 4 screws).
® Tighten screws firmly.
Foam mat or thick
soft cloth
Accessories
Assembly screws
(4 of each)
XSS5+15FNK
size(M5 x 15)
tB;
XYN4+F3OFJK
size (M4 x 30)
Bracket (1)
Base (1)
8
( WARNING )
Do not disassemble or modify the pedestal.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
( Caution
Do not use any pedestal other than that provided with this TV.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
® If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
® If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Hook
Close
Note the correct polarity
(+ or-).
Open
Caution
® Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
*_.Do not mix old and new batteries.
** Do not mix different battery types (such
as alkaline and manganese batteries).
** Do not use rechargeable (Ni-Cd)
batteries.
® Do not burn or break batteries.

Connections
Front of the TV LAN connector USB 1 connector
USB
connector
slot (p. 22)
HDMi 4
terminal
PC terminaa
Back of the TV DIGITALAUDIO OUT
Back of the TV VHF/UHF Antenna
Power Cord
(Connect after
aalthe other
connections have
been made.)
VHF/UHF Antenna
• NTSC (National Television System Committee):
• ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), standard-definition television
(SDTV), data broadcasting, multichannel surround-sound audio and interactive television.
Cable
@You need to subscribe to a cable TV service to enjoy viewing their programming.
¢ You may need to subscribe to a high-definition (HD) cable service to enjoy HD programming.
The connection for high-definition can be done with the use of an HDMI or Component Video cable. (p. 10)
@When using a Cable box, external equipment and video cables shown in this manual are not supplied with the TV.
@For additional assistance, visit us at: www.panasonic.com/help
www.panasonic.ca
Connection references
[] Antenna terminal [] Pin terminals [] HDMI terminal
I_: _ red blue green _/,_
_i_ _ ® green/yel_%
Firmly tighten by hand. Insert firmly. Insert firmly
®®
>©
o
co
(I)
-_o_
O
o
>
o
ffl
ffl
©
9

Best
Good
_A>To use HDMI terminals F%
_ I ] AVOUT
HDMI DVl OUT
Conversion cable J ,
S_ AUDIO OUT
\
@ VIERA Link connection, please refer to p. 29
6_The HDMIconnection is required for a 1080p signal.
AV Equipment
e.g. Blu-ray Disc
player
AV Equipment
e.g. Blu-ray Disc
player
_B>To use COMPONENT terminals
Basic
(NotHD)
iiiiiiiiiil;i;i
!!!!!!!!!!i!!
!
!
_= = ,,1= =
H !
! !
! H white
To use COMPOSITE terminals
red
red
red
COMPOSITE
OUT
AV Equipment
e.g. Blu-ray Disc
player
AV Equipment
e.g. DVD Recorder
or
e.g, VCR
10
DIGITAL
=[_]_ _ _ _ AUDIO IN
Optical cable
Audio equipment
e.g. Amplifier
@For HDMi-ARC (Audio Return Channel) connection, see P.28
RGB PC cable
Audio cable
Conversion adapter (if necessary)
i,, [_ pc OUT ,,, Computer.//
@Audio OUT
"_--Connect cable which matches the
audio out terminal on the computer

identifying Controls
Front of the TV
Remote control sensor
within about 23 feet
(7 meters) in front of the
TV set
- Power indicator
(on: red, off: no light)
C.A.T.S (ContrastAutomatic Tracking System)
Selects channels in sequence
up/down
Menu navigations
Changes the input mode
Chooses menu and submenu entries
POWER button
4_The TV consumes a small amount of electric energy even when turned off.
#_Do not place any objects between the TV remote control sensor and remote control.
Switches TV On or Off (Standby)
Select source to watch (p. 21)
Displays Main Menu (p. 44)
Closed Caption On/Off (p. 17)
y Audio Programming
(p. 17)
Exits from menu screen
[_VIERA Link menu (p. 32-33)
Display VIERATOOLS Menu (p. 20)
Displays Sub Menu for special functions
(when available) (p. 18)
Colored buttons
(used for various functions)
g from SD Card (p. 22-27)
_ge
back to previous menu
Volume up/down
Sound mute On/Off
Changes aspect ratio and zoom
(p. 18, 50) J
Switches to previously viewed channel
or input
External equipment operations
(p. 33)
up/down, when viewing from
ANT/Cable source
Displays or removes the channel
banner (p. 17)
perates the Favorite channel list
function (p. 18)
-- Numeric keypad to select any channel
or press to enter alphanumeric input in
menus
Use for digital channels. (p. 17)
®®
©__
O(.Q
To
©
8
O_
11

First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time after the power cord
is inserted into a walt outlet and when "Auto power on" (p. 48) is set to "No".
Turn the TV On with the POWER button
(TV) (Remote)
POWER POWER
OF
Configure your viewing mode
_1_Select your language
_2)Select your country
_3bSelect your viewing mode (Be sure to select "Home use")
® Please confirm your selection (Home Use) before pressing OKbutton.
[] If you select "Store Demonstration" by mistake in _,
confirmation screen will be displayed.
12
® Select "No" and return to previous screen _3_.
® if you select "Yes", Screen enters the store demonstration mode.
To display the "Set viewing mode" screen again as shown above and
select "Home Use", do one of the following:
° Press and hold down the side POWER button for at least five seconds.
° Unplug power cord for 30 seconds and plug it again.
® If you use any other step other than _ then turn the TV off, or if you used
the EXIT button to quit before completing the settings, the next time you turn
the TV on, "First time setup" will not be automatically displayed.
• The settings up to that point are saved.
• You can start "First time setup". (p. 48)
® Language, ANT/Cable setup, Input labels, and Clock can also be changed
in the Settings Menu. (p. 48)

ANT/Cable setup
_1)Do you use aCable, Satellite or Fiber Optic box with this TV?
_a Select signal type
(CablelAntenna)
_b Select connection type
for Cable or Satellite
box and go to O (Input
labels)
(3)Select scan type
@Start scanning
®
77
=_.
-t
3
GO
¢=
[] Press to exit from
amenu screen
EXiT
[] Press to go back to
the previous screen
RETURN
0
(2NND
_ About broadcasting
systems
Analog (NTSC):
Conventional
broadcasting
Digital (ATSC):
Newprogramming
thataltowsyouto
viewmorechannels
featuringNgh-quality
videoandsound
@Complete scanning
13

Label the inputs for easy identification (Label inputs)
To name each input, follow the instructions on screen.
When done, select NEXT and press OK to go to the next step.
or
Follow the instructions on
screen to complete the
following operations.
R--> To edit the labels to match your connected devices.
Label: [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME
THTR/RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/
MONITOR/AUX/OTHER/Not used
• Select "Not used" for any back-panel input that has no device connected to it.
Afterward, the input will be skipped when pressing iNPUT, for your convenience.
° The input labels can be changed at any time from the TV's setup menu
Configure Network settings
O_Select the Network type
Set later: Go to Q
You can set in "Setup" menu later,
Wireless (WiFi): Start "Wireless network" (p. 16)
Select the setting mode Automatic:
Manual:
Press OK to start setup automatically.
Error screen is displayed when
Network connection has failed.
Go to Manual setting.
[] Press to exit from
a menu screen
EXiT
[] Press to go back to
the previous screen
RETURN
@
IAutomaticl ,_,
Start connection test
[Connection test I
Connection
@ Complete "Network settings'__
Helpful information isdisplayed when you
successfully complete "Network settings".
[] Manual setting
[] Error screen
Retry: Go to "Start connection test"
Set later: Go to @
14

Adjust the Clock (Set clock)
When done, select NEXT and press OK to go to the next step.
[] Manual setting
or
[] Auto setting
Follow the instructions on
screen to complete the
following operations.
Manual: Adjust the clock manually (Year/Month/Day/Hour/Minute)
Auto: The clock is adjusted automatically via Internet service Only
available when the TV is on a network -->Set "Network settings' first
ITime zoneISelect your time zone (EST/CST/MST/PST/AKST/HST/NST/AST)
Set DST (Daylight Saving Time) setting. (On/Off)
On: Advances the clock one hour from the time it is set according to the
time zone.
Complete First time setup
Congratulations! You are done.
The First time setup can be repeated at any time
Press MENU and select SETUP; then "First time setup"
®
77
-4
3
G)
03
t"
[] Press to exit from
amenu screen
EXIT
[] Press to go back to
the previous screen
RETURN
@
To watch TV via a Cable box, Satellite receiver, or any other source (DVD,
DVR, gaming device, etc), press the INPUT button and select the appropriate
input
15

[] About wireless LAN
e Wireless LAN adapter and Access point need to be obtained separately.
For the latest information on applicable LAN adapters, check the following website:
http://Panasonic.com/NetConnect
e Check that the Access point supports WPS*.
(If it does not support WPS, the encryption key of the Access point is required when configuring settings.)
e Follow the instructions on the Access point setup screen and configure the appropriate security settings.
For more details on setting of Access point, please refer to operating manual for the Access point.
e We recommend using 11n (5 GHz) for the wireless system between the wireless LAN adapter and Access point.
Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the communication speed may be slower.
e If the wireless system of the Access point is changed, devices that could connect by wireless LAN may no longer be
able to connect.
e When EASY IPTV, Network camera, DLNA, or other device is using the network, do not disconnect the wireless LAN
adapter.
e Keep the TV away from the following devices as much as possible:
Wireless LAN, microwaves, and other devices that use 2.4 GHz and 5 GHz signals. Otherwise, the TV failures such as
malfunction may occur due to the radio wave interference.
*WPS: Wi-Fi Protected Setup
=Wireless network (First time setup) in 699
_!_Display "Wireless network"
_2_Select the connection method
WPS (Wi-Fi Protected Setup using push button)
e Follow the directions on screen to complete the setting.
e See page 37 for more information.
16

Watching TV
Turn power on
(Remote) (TV)
POWER POWER
or
INPUT
® Please select correct input --> _ (p. 21)
Select a channel number
or _
* Also available side CH button on the unit,
[For Cable/Satellite box connection]
- Use your connected box s remote contro.
[] To directNy enter the digital channel
number
When tuning to a digital channel,
press the button to enter the minor
number in a compound channel
number.
example: CH15-1: __
® Reselect "Cable" or "Antenna" in "ANT in" of "ANT/Cable setup" to switch the signal
reception between cable TV and antenna. (p. 13, 42)
® The channel number and volume level remain the same even after the TV is turned
off.
[] Other Useful Functions
[] Select the Audio mode for watching "iV
SAP Digital mode
Press SAP to select next Audio track (if available) when receiving a digital channel.
Analog mode
Press SAP to select the desired Audio mode.
• Each press of SAP will change the Audio mode. (Stereo/SAP/Mono)
® SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
® Contact your Cable or Satellite operator for instructions on enabling SAP with their box.
[] Switches the Closed Caption mode On or Off
cc
@ Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI.
® Contact your Cable or Satellite operator for instructions on enabling CC with their box.
[] Displays and removes information. When watching programming via the Antenna/Cable input,
shows the channel banner.
INF0 Channel Clock
Station Signal Picture imer
identifier resolution mode remaining time
Closed caption Rating Level Aspect ratio
®®
3_
(D C-o
C
-c_
17

[] Press FORMAT to cycle through the aspect modes (p. 50)
FORMAT i_ 4 _L • 480i, 480p: FULL/JUST/4:3/ZOOM
• 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM
Use when the picture does not fill the whole screen (bars appears on either side of
the image) or portions of the picture is trimmed.
1. Some content, such as film-based movies, are available in extra-wide format.
Top and bottom bars are unavailable.
2. Connected devices, such as Cable/Satellite box, DVD/Blu-ray players and game
consoles have their own aspect (format) settings. Adjust the device's aspect
settings.
[] Press SUB MENU to show the Sub Menu screen
This menu consists of shortcuts to convenient functions.
Sub menu is only available when the TV is using the Antenna/Cable input, not when using Cable or Satellite box.
SUB
MENU --Specify favorites or type of channels to view when pressing the channel up/
down button.
channel (below)
the channel identifier (p. 43)
signal strength (p. 43)
[] FAVORITE
Channel numbers registered in Favorite are displayed on the favorite tune screen. Select the desired broadcast
station with the cursor or use the number buttons. (p. 17)
FAVORITE z6-1
[] Set the Favorite channel
SUB
MENU
[] Delete a favorite channel
[] To change the page
FAVORITE
mm_
or
m _ _ select the list number
_ _ (to save the channel
_ _ without pressing OK)
,' _select
_@delete
(while holding down)
Press repeatedly to change between pages (1/3, 2/3, 3/3 or exit)
Changes the page forward/backward
® Favorite channels cannot be set when using Cable or Satellite box.
18

[] Other Useful operations
You can use the remote control keys to enter the alphanumeric characters.
[] Switches input mode
GABC _ abc _ 123
[] Press each number key
to cycle through the
alphanumeric character
Navigation area
_ You can also use a USB keyboard (not supplied) to enter the alphanumeric characters.
® Keyboard type (p. 48)
You need to enter the password when you access locked channel or inputs.
Input your 4-digit password mm_ 6_If it is your first time entering the password, enter the password twice in
order to register it.
6_Make a note of your password. Do not forget it. (If you have forgotten
your password, consult your local dealer.)
6_When you select a locked channel, a message will be displayed that
allows you to view the channel after you input your password.
6_Change password (p. 47)
You can operate non-character keys as remote control keys.
[] Key chart
Keyboard key
UP/DOWN/LEFT/RIGHT
Enter
BackSpace
0-9
F2
Remote key
Cursor key
OK
Return (when you do not
input character)
0-9
Menu
VIERA Tools
Submenu
Keyboard key
F4
F5
F6
F7
F8
F9(Red)/F10(Green)/
F11 (Blue)/F 12(Yellow)
Remote key
Input
Channel Down(-)
Channel up(+)
Volume Down(-)
Volume up(+)
Color key
j(Red/Blue/Yellow/Green)
® For more details on setting and operation of the USB keyboard, please also read the operating manuals for the USB
keyboard.
® Some keyboards do not have these keys.
®
o
z3-
.5"
-1
<
19

Using VI TOOLS
VIERA TOOLS is the easy way to access the TV's special features. They are displayed as shortcut icons on
the TV screen.
DispJay VlERA TOOLS
Select the item
® The icons displayed differ depending on your country or area you select. (p. 12)
[] Press to exit from
amenu screen
EXiT
[] Press to go back
to the previous
screen
RETURN
@
EASY IPTV (example)
Set each item
® Using EASY IPTV _ p. 39
Part of icons on VIERA TOOLS screen above provide you usable
Internet service such as VOD (Video-on-demand), Music distributer
or sociaa networking service etc.
® Game mode
m_l_Change to "Game" mode.
Picture mode (p. 45)
@VIERA Link
_VIERA Link (p. 32-33)
® Eco mode
ECO/energy saving (p. 48)
® Media player
Media player (p. 22-27)
@ DLNA
_Using DLNAfeature (p, 40)
2O