(PT-F300NTU/PT-F300NTE/PT-F300NTEA)
(PT-FW300NTU/PT-FW300NTE/PT-FW300NTEA)
Network Function Quick Guide
Installing the software and viewing the operating instructions
Before installation, see “System requirements” at the upper right of this guide.
•
Shut down all software currently active on Windows. Otherwise, installation may not be possible.
•
Administrator authority is required for installation.
•
If Wireless Manager mobile edition (henceforth abbreviated to “ME”) 5.5 or an earlier version has been
•
installed, uninstall it. (See the bottom left of this guide.)
Set the supplied CD-ROM in the CD or DVD drive.
1 The installer starts up automatically and•
the screen at right appears.
If the installer does not start up•
automatically, double-click [EasyInstall]
→[Easy_Inst.exe] in the CD-ROM.
Click a software or function name button.
2 [Wireless Manager ME 5.5]:
This software is used to send screen images from a computer to the projector via a wireless
or wired LAN. When installing this software, follow the instructions on the screen.
[Installation Free Set Up]:
Although some are impossible, you can use the basic functions of Wireless Manager ME 5.5
without installing it in the computer.
When using Wireless Manager ME 5.5 without copying the program
Click [Direct CD-ROM Startup] to launch Wireless Manager ME 5.5.
When copying Wireless Manager ME 5.5
Click [Other Media Source Startup, Make Copy Here].(1)
Select the destination to save, and click [OK].(2)
Double-click the Wireless Manager ME 5.5 icon (WMstart.exe) in the destination to(3)
launch Wireless Manager ME 5.5.
[Network Function Edition]:
The “Network Function Edition for Windows” and “Secondary Display Transmission
Function Advanced Operation” documents (operating manuals) are stored in the supplied
CD-ROM in PDF file form. To see them, Adobe Reader (URL: http://www.adobe.com/) is
required. Click on a desired document name on the displayed list.
System requirements●
OS
Microsoft Windows 2000 Professional SP4
Microsoft Windows XP Home Edition/XP Professional/XP Tablet PC Edition 2005
Microsoft Windows Vista®Ultimate 32 bit/Vista®Business 32 bit
Microsoft Windows Vista®Home Premium 32 bit/Vista®Home Basic 32 bit
CPU Intel®Pentium®III 800 MHz or faster or compatible processor
(1 GHz or faster is recommended when using live mode)
RAM 256 MB
Empty hard
disk capacity 60 MB
Web browser Internet Explorer 6.0 or newer
Netscape Communicator 7.0 or newer
Hardware
conditions
CD or DVD drive
Wireless or wired LAN function
Wireless
LAN
An IEEE802.11 b/g built-in wireless LAN system or an IEEE802.11 b/g wireless LAN
adaptor must be installed and running properly. However, some IEEE802.11 b/g wireless
LAN may not allow connection to IEEE802.11 g projectors.
When your computer has no built-in wireless LAN function, a wireless LAN card driver
must be installed and recognized properly.
If Network Bridge in Windows XP or firewall in Windows XP SP1 or later is enabled, this will
prevent a wireless connection. For details, see “Network Function Edition for Windows”
in the supplied CD-ROM.
Wired LAN
A built-in LAN terminal (10BASE-T, 100BASE-TX or 1000BASE-T) or a wired LAN adaptor
must be running properly.
A LAN cable to connect must be compatible with category 5 or above (category 5e or
above when using 1000BASE-T). Consult your system administrator when selecting a
straight or crossover type.
Other When security (firewall) software and utilities for network cards are installed, these may
prevent connection of the projector.
Note that operation is not guaranteed when used with system environments other than the above or on•
homemade computers.
Operation is not guaranteed for all computers that meet the above conditions.•
Operation is not guaranteed for all wireless LAN cards and built-in wireless LAN adaptors.•
It is forbidden to take the projector outside the country or region where you purchased it, so use it only in•
the said country or region. Also, note that depending on countries or regions there are restrictions on the
channels and frequencies at which you can use the wireless LAN.
You must agree to the “Software Licensing Agreement” to use the supplied software. Please read it•
carefully when it is displayed during installation.
URL :http://panasonic.net/pavc/projector/
Microsoft and its logo as well as Windows and Windows Vista• ®are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
Intel and Pentium are registered trademarks or trademarks of Intel Corporation or its affiliates in the United•
States and other countries.
Adobe Reader is a trademark of Adobe Systems Incorporated.•
Using network functions ※The projectors illustrated as examples are PT-F300NTU.
For details of usage, see “Network Function Edition for Windows” in the supplied CD-ROM.
Easy wireless set up●
Launch Wireless Manager ME 5.5.
1 When the user name setting window appears
Set the icon and user name, and click [OK].
If the icon and user name have already been set, the setting window does not appear. Go to•
step 2.
Select the projector that you want to connect to, and click
2 [Connect].
When the confirmation
dialog window appears
When the network adaptor
selection window appears
<Live mode>
Click [YES].(1) Select the adaptor from the(1)
list and click [OK].
If the confirmation dialog(2)
window appears, click
[YES].
Used for normal presentations
Click [
3 ] on the launcher.
Uninstalling Wireless Manager ME 5.5 or an earlier version:
From the desktop, select [Start] →[All Programs] →[Panasonic Wireless Display] →[Uninstall
Wireless Manager mobile edition ※.※], and follow the instructions on the screen.
(※.※is from 1.0 to 5.0.)
Other examples of usage●
<Multi live mode>
<4-screen multi style> <4-screen index style> <16-screen index style>
<Multiple source live mode> <Multiple source multi live mode>
<Selective area transmission> <Secondary display transmission>
<Infrastructure mode (Connecting through the access point)>
<Using WebBrowser> <Using PJLink™ protocol>
See “Network Function Edition for Windows” in the supplied CD-ROM.
