Panasonic PT-JX200HBU User manual

Thank you for purchasing this Panasonic product.
■This product is attached to track systems. Ensure that track system is installed per
manufacturer’s instructions and in accordance with the National Electrical Code and local
building codes.
■Before installing and operating this product, please read the instructions carefully and save
this manual for future use.
■Before using this product, be sure to read “Read this rst!” (xpages 4 to 11).
■Refer to “Operating Instructions – Content Manager Manual” for signage playback.
DPQP1085ZB
DLP™ Projector Commercial Use
Operating Instructions
Functional Manual
ENGLISH
Model No. PT-JX200HBU
 PT-JX200HWU

2 - ENGLISH
Contents
Contents
Read this rst! 4
Chapter 1 Preparation
Precautions for use 16
Cautions when installing 16
Security 17
Notes regarding the wireless LAN 18
Art-Net 19
Cautions on use 20
Disposal 20
Accessories 21
About your projector 23
Remote control 23
Projector body 24
Adapter 26
Preparing the remote control 27
Inserting and removing the batteries 27
When using multiple projectors 27
Chapter 2 Getting Started
Before the installation 29
Installation form 29
Projection direction 29
Projection dimensions 30
Installing/removing the projector 32
Before mounting 32
Preparing the adapter cover 32
Mounting the projector to the track system 33
Adjusting the projection position 39
Removing the projector from the track system 40
Connecting 43
Before connecting 43
Connecting example: External devices 43
Attaching the caps to the connecting terminals 43
Chapter 3 Basic Operations
Turning on/off the projector 46
Power indicator 46
Turning on the projector 47
When the initial setting screen is displayed 47
Making adjustments and selections 50
Turning off the projector 51
Projecting 52
Selecting the input 52
Adjusting the projection 53
Using SD cards 54
Notes on use 54
Data protection 54
Cards that can be used with the projector 54
Inserting an SD card 55
Ejecting the SD card 55
Operating with the remote control 56
Switch on/off spotlight display 56
Adjusting the volume 56
Using the AV mute function 57
Setting the remote control ID numbers 57
Chapter 4 Settings
Menu navigation 59
Navigating through the menu 59
Main menu 60
Sub-menu 61
[PICTURE] menu 63
[PICTURE MODE] 63
[CONTRAST] 63
[BRIGHTNESS] 63
[COLOR] 63
[TINT] 64
[COLOR TEMPERATURE] 64
[DIMMER] 65
[COLOR MATCHING] 65
[LIGHTING] menu 67
[LIGHTING] 67
[PATTERN] 67
[MEMORY VIEWER] menu 69
[VIEW] 69
[SORT] 69
[AUTOPLAY] 69
[INTERVAL] 69
[EFFECT] 70
[GUIDE] 70

ENGLISH - 3
Contents
[SETUP] menu 71
[PROJECTOR ID] 71
[PROJECTION METHOD] 71
[VERTICAL FLIP] 71
[SHIFT] 71
[ASPECT] 72
[KEYSTONE] 73
[SIGNAGE] 74
[DIRECT PLAY SETTING] 74
[ECO MANAGEMENT] 75
[INITIAL STARTUP] 77
[STARTUP INPUT SELECT] 77
[AUDIO SETTING] 77
[DC OUT] 78
[STATUS] 78
[SCHEDULE] 79
[DATE AND TIME] 80
[SAVE ALL USER DATA] 81
[LOAD ALL USER DATA] 81
[INITIALIZE] 81
[SERVICE PASSWORD] 82
[NETWORK] menu 83
[PROJECTOR NAME] 83
[WIRED LAN] 83
[WIRELESS LAN] 84
[NETWORK CONTROL] 87
[Panasonic APPLICATION] 87
[NETWORK STATUS] 89
[Art-Net] 90
[Art-Net STATUS] 93
[MIRRORING] 93
[DISPLAY OPTION] menu 95
[HDMI IN] 95
[ON-SCREEN DISPLAY] 95
[AV MUTE] 96
[DISPLAY LANGUAGE] menu 97
Changing the display language 97
[SECURITY] menu 98
[SECURITY PASSWORD] 98
[SECURITY PASSWORD CHANGE] 98
[TEST PATTERN] menu 99
[TEST PATTERN] 99
Chapter 5 Operations
Memory Viewer function 101
Files that can be played back with the Memory
Viewer function 101
Displaying the Memory Viewer screen 102
Operating the Memory Viewer screen 102
Playing back still images 104
Playing back movies 105
Direct playback 107
Memory Viewer screen descriptions 108
Network connection 109
When connecting via wired LAN 109
When connecting via wireless LAN 110
Web control function 113
Computer that can be used for setting 113
Accessing from the web browser 113
MIRRORING function 132
Chapter 6 Maintenance
Light source/temperature indicators 135
When an indicator lights up 135
Inspection and maintenance 136
Before maintaining the projector 136
Maintenance 136
Inspection 136
Troubleshooting 137
FAQ 138
Chapter 7 Appendix
Technical information 140
Using the PJLink protocol 140
Using Art-Net function 140
Control commands via LAN 142
Glossary of network terms 145
Specications 147
Dimensions 149
List of compatible signals 150
Index 151

4 - ENGLISH
Read this rst!
Read this rst!
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
fFOR USE WITH HALO Power-Trac TRACK SYSTEM ONLY.
fDo not install any luminaire assembly closer than 6 inches from any curtain or similar combustible material.
fRead all instructions.
WARNING:
1. Remove the projector from the track system or cut off the power supply when this projector is not in use for
a prolonged period of time.
2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied
service personnel.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
WARNING: RISK OF ELECTRIC SHOCK. DON’T OPEN.
Indicated on the projector
oThe lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of electric shock to persons.
7The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
WARNING: Do not look at the light emitted from the lens while the projector is being used.
RG2
Indicated on the projector
CAUTION: Use of controls or adjustments or performance of procedures other than those specied herein
may result in hazardous radiation exposure.

ENGLISH - 5
Read this rst!
Notice on laser
This projector is the Class 3R laser product that complies with IEC 60825-1:2007.
直接放射又は分散放射に眼又は皮膚を暴露させないこと
DPQT1025ZA
DANGER- CLASS 4 LASER RADIATION WHEN OPEN AVOID EYE OR
SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION
DANGER- RAYONNEMENT LASER DE CLASSE 4 - EN CAS D'OUVERTURE
EXPOSITION DANGEREUSE AU RAYONNEMENT DIRECT OU
DIFFUS DES YEUX OU DE LA PEAU
(Inside of product)
WARNING (USA and Canada)
fNot for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
fFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the
building installation wiring.
NOTIFICATION (Canada)
This class B digital apparatus complies with Canadian ICES-003.
Product Identication Marking is located on the bottom of the Wireless LAN Adaptor.
For USA-California Only
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate

6 - ENGLISH
Read this rst!
FCC NOTICE (USA)
Declaration of Conformity
Model Number: PT-JX200HBU / PT-JX200HWU
Trade Name: Panasonic
Responsible Party: Panasonic Corporation of North America
Address: Two Riverfront Plaza, Newark, NJ 07102-5490
General Contact: http://www.panasonic.com/support
Projector Contact: http://panasonic.net/avc/projector/
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any unauthorized
modications.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
fReorient or relocate the receiving antenna.
fIncrease the separation between the equipment and receiver.
fConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
fConsult the dealer or an experienced radio/BD technician for help.
Any changes or modications not expressly approved by Panasonic Corp. of North America could void the
user’s authority to operate this device.
This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.
The user may nd the booklet “Something About Interference” available from FCC local regional ofces helpful.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached installation instructions. This includes
using shielded interface cables when connecting to computer or peripheral devices. Also, any unauthorized
changes or modications to this equipment could void the user’s authority to operate this device.

ENGLISH - 7
Read this rst!
FCC NOTICE (USA and Canada)
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the
potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated
as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause
interference with and/or damage this product.
The available scientic evidence does not show that any health problems are associated with using low power
wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless
devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does
not produce heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested
that some biological effects might occur, but such ndings have not been conrmed by additional research.
Wireless LAN adaptor has been tested and found to comply with FCC/IC radiation exposure limits set forth for
an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in KDB 447498 D01
and RSS-102 of the IC radio frequency (RF) Exposure rules.
Federal Communication Commission (FCC) / IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999/
IC RSS-102 and had been tested in accordance with the measurement methods and procedures specied in
KDB 447498 D01. This equipment should be installed and operated with minimum distance 20 cm between the
radiator & your body.
CAUTION:
Be aware of the following limits before using the Wireless LAN Module.
•To use the Wireless LAN Module, an access point needs to be obtained.
•Do not use the Wireless LAN Module to connect to any wireless network (SSID*) for which you do not have
usage rights. Such networks may be listed as a result of searches. However, using them may be regarded
as illegal access.
*SSID is a name for identifying a particular wireless network for transmission.
•Do not subject the Wireless LAN Module to high temperatures, direct sunlight or moisture.
•Do not bend, or subject the Wireless LAN Module to strong impacts.
•Do not disassemble or alter the Wireless LAN Module in any way.
•Do not attempt to install the Wireless LAN Module in any incompatible device.
•Do not remove the Wireless LAN Module from the host product during operations.
•Data transmitted and received over radio waves may be intercepted and monitored.
•To avoid malfunctions caused by radio wave interface, keep the host product away from the devices such as
other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using
the Wireless LAN Module.
•When noises occur due to the static electricity, etc., the host product might stop operating for the protection
of the devices. In this case, turn the host product Off with Mains power On / Off switch, then turn it On again.
•Depending on the area, this Wireless LAN Module may not be available.

8 - ENGLISH
Read this rst!
WARNING:
rPOWER
The circuit breaker shall be installed near the equipment and shall be easily accessible when problems
occur. If the following problems occur, cut off the power supply immediately.
Continued use of the projector in these conditions will result in re, electric shock, or will cause visual
impairment.
fIf foreign objects or water get inside the projector, cut off the power supply.
fIf you notice smoke, strange smells or noise coming from the projector, cut off the power supply.
Please contact your dealer for repairs, and do not attempt to repair the projector yourself.
When mounting/removing the projector to/from the track system, or performing maintenance, be sure
to cut off the power supply.
Electric shocks can result.
Completely insert the power connector of the adapter into the projector terminal.
If the power connector is not inserted correctly, electric shocks or overheating will result.
fDo not use the power connector which is damaged.
Do not do anything that might damage the adapter .
fIf the adapter is used while damaged, electric shocks, short-circuits or re will result.
fDo not damage the power cord, make any modications to it, place it near any hot objects, bend it
excessively, twist it, pull it, place heavy objects on top of it.
Ask an Authorized Service Centre to carry out any repairs to the adapter that might be necessary.
Do not use anything other than the provided adapter.
Failure to observe this will result in electric shocks or re.
Do not handle the track system and the adapter with wet hands.
Failure to observe this will result in electric shocks.
During a thunderstorm, do not touch the projector or the track system.
Electric shocks can result.
Do not overload the track system.
If the power supply is overloaded (ex., by mounting too many devices), overheating may occur and re will
result.
rON USE/INSTALLATION
Ensure that track system is installed per manufacturer’s instructions and in accordance with the
National Electrical Code and local building codes.
Inadequate installation may result in re, electric shocks, or falling of the projector.
Mount the projector only to specied track systems.
Failure to observe this will result in re, electric shocks, or falling of the projector.
Mount the projector to the track system which is installed in the horizontal ceiling or beam, and can
withstand the load.
Mounting the projector to the following track system will result in re, electric shocks, or falling of the projector.
fTrack system that is installed in the wall surface
fTrack system that is installed in the sloping ceiling or beam
fTrack system that cannot withstand the load
fTrack system that is installed on the oor
Make sure that your footing is safe and secure during installation.
If your footing is not secure, you may tip over or fall down, and an injury may result.
Make sure that the mounting work is carried out by two people.
Failure to observe this may result in damage or deformation of the projector, serious accidents or injury caused
by falling.
When mounting the projector to the track system, completely turn the lever of the track mount part to
the mounting direction.
Inadequate mounting to the track system will result in falling accident.
When removing the projector from the track system, hold the projector with your hand.
Releasing the lever of the track mount part without holding the projector will result in damage or deformation of
the projector by falling, or serious accident or injury.

ENGLISH - 9
Read this rst!
WARNING:
When removing the projector from the track system, rst release the lever of the track mount part on
the indicators.
Releasing the lever on the main unit rst will result in the damage to the components and will cause falling
accident.
Attach the adapter in the right direction to the track system.
Using the projector with the adapter attached in the wrong direction will result in re or electric shocks.
Do not use the projector whose outer case or track mount part is damaged due to falling or other
reasons.
Continued use of the projector in such a condition will result in re, electric shock, or exposure to dangerous
laser radiation.
Please contact your dealer for repairs, and do not attempt to repair the projector yourself.
Do not set up the projector in hot, humid or dusty places or in places where the projector may come
into contact with oily smoke or steam.
Using the projector under such conditions will result in re, electric shocks or deterioration of components.
Deterioration of components may cause the projector to fall down.
Do not cover the air intake/exhaust ports.
Doing so will cause the projector to overheat, which can cause re or damage to the projector.
fDo not place the projector in narrow, badly ventilated places.
fDo not bring a cloth or papers close to the projector, as these materials could be drawn into the air intake
port.
fKeep the air intake/exhaust ports on the power supply unit away from walls or objects by 300 mm (11-13/16")
or more.
Do not look at the light emitted from the lens while the projector is being used.
Do not enter the projection luminous ux using an optical device (such as magnier or mirror).
Doing so can cause loss of sight.
fStrong light is emitted from the projector’s lens. Do not look at this light.
fBe especially careful not to let young children look into the lens. In addition, turn off the power and cut off
the power supply when you are away from the projector.
Never attempt to remodel or disassemble the projector.
High voltages can cause re or electric shocks.
fFor any inspection, adjustment and repair work, please contact your dealer.
Doing so may cause exposure to dangerous laser radiation.
fThe laser module is built in this projector. Follow procedures specied in the Operating Instructions to make
operations and adjustments.
Do not allow metal objects, ammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in re, electric shock, or malfunction of the
projector.
fIf liquid enters inside of the projector, cut off the power supply and consult your dealer.
rACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re.
fDo not use unspecied batteries.
fDo not use chargeable batteries.
fDo not disassemble dry cell batteries.
fDo not heat the batteries or place them into water or re.
fDo not allow the + and – terminals of the batteries to come into contact with metallic objects such as
necklaces or hairpins.
fDo not store or carry batteries together with metallic objects.
fStore the batteries in a plastic bag and keep them away from metallic objects.
fMake sure the polarities (+ and –) are correct when inserting the batteries.
fDo not use a new battery together with an old battery or mix different types of batteries.
fDo not use batteries with the outer cover peeling away or removed.

10 - ENGLISH
Read this rst!
WARNING:
If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.
fBattery uid on your skin or clothing could result in skin inammation or injury.
Rinse with clean water and seek medical advice immediately.
fBattery uid coming in contact with your eyes could result in loss of sight.
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Remove the depleted batteries from the remote control promptly.
fLeaving them in the remote control may result in uid leakage, overheating, or explosion of the batteries.
Do not allow children to reach the batteries and covers.
Accidentally swallowing them can cause physical harm.
fIf swallowed, seek medical advice immediately.
CAUTION:
rON USE/INSTALLATION
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in re.
fTake particular care in locations exposed to direct sunlight or near heaters.
Do not install the projector in a location where corrosive gas is produced.
Doing so will result in falling of the projector or cause the projector to rust.
Do not use the projector together with dimmers such as a light controller.
Doing so will result in the damage to the components inside the projector and will cause re.
Do not put excessive force on the projector by hanging on the projector or dangling any object.
Doing so will result in falling of the projector.
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
fHeated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot
withstand heat close to this port.
Do not install the projector in a location where salt pollution or corrosive gas may occur.
Doing so may result in falling due to corrosion. Also, it may result in malfunctions.
Never plug headphones and earphones into <AUDIO OUT> terminal.
Excessive sound pressure from headphones and earphones can cause hearing loss.
Always disconnect the adapter from the track system before moving the projector.
Moving the projector with the adapter still attached can damage the adapter, which will cause re or electric
shocks to occur.
Do not allow unattended children to use the projector.
Incorrect handling will cause them to be exposed to dangerous laser radiation.
fUse the projector under the supervision and control of adults.
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause re or electric shocks.
rACCESSORIES
When not using the projector for an extended period of time, remove the batteries from the remote
control.
Failure to observe this will cause the batteries to leak, overheat, catch re or explode, which may result in re
or contamination of surrounding area.
rMAINTENANCE
Cut off the power supply and remove the projector from the track system before carrying out any
cleaning.
Failure to do so may result in electric shock.
Ask your dealer about inspection by a qualied technician once every three years.
Using the projector for long time without inspection may result in re, electric shocks, or falling of the projector.
fFor inspection fee, ask your dealer.