Panasonic PT-MZ670 User manual

Thank you for purchasing this Panasonic product.
■This manual is common to all the models regardless of sufxes of the Model No.
zfor India
D: The standard zoom lens supplied
zfor Asia (except for Taiwan, Korea) / Oceania
A: The standard zoom lens supplied LA: The lens sold separately
zfor Taiwan
A: The standard zoom lens supplied
zfor Korea
Without L: The standard zoom lens supplied
With L: The lens sold separately (PT-MZ670L, PT-MZ570L only)
zfor other countries or regions
Without L: The standard zoom lens supplied With L: The lens sold separately
■Before operating this product, please read the instructions carefully and save this manual
for future use.
■Before using this product, be sure to read “Read this rst!” (x pages 5 to 15).
DPQP1200ZA
LCD Projector Commercial Use
Operating Instructions
Functional Manual
ENGLISH
Model No. PT-MZ670
 PT-MW630
 PT-MZ570
 PT-MW530

2 - ENGLISH
Contents
Contents
Read this rst! 5
Chapter 1 Preparation
Precautions for use 19
Lens protection material
19
Cautions when transporting
19
Cautions when installing
19
Security
22
Notes regarding the wireless LAN
22
Light ID
23
DIGITAL LINK
24
Application software supported by the projector
24
Disposal
24
Storing
24
Cautions on use
25
Accessories
26
Optional accessories
27
About your projector
28
Remote control
28
Projector body
30
Preparing the remote control
33
Inserting and removing the batteries
33
When using the multiple projectors
33
Connecting the remote control to the projector
with a cable
33
Chapter 2 Getting Started
Setting up 35
Installation mode
35
Parts for installation (optional)
36
Projected image and throw distance
37
Adjusting adjustable feet
47
Removing/attaching the projection lens
48
Removing the projection lens
48
Attaching the projection lens
49
Attaching the Wireless Module
50
Attaching the Wireless Module
50
Connecting
51
Before connecting
51
Connecting example: AV equipment
52
Connecting example: Computers
53
Connecting example using DIGITAL LINK
54
Chapter 3 Basic Operations
Switching on/off the projector 57
Connecting the power cord 57
Power indicator 58
Switching on the projector 59
When the initial setting screen is displayed
60
Making adjustments and selections
64
Switching off the projector 65
Projecting 66
Selecting the input signal 66
Adjusting the focus, zoom, and lens shift
67
Moving the lens position to the home position 68
Adjustment range by the lens position shift
(optical shift) 68
Using the USB memory 69
Notes on use 69
USB memory that can be used with the
projector 69
Attaching the USB memory 69
Removing the USB memory 70
Operating with the remote control
71
Using the shutter function 71
Using the mute function 71
Adjusting the volume 72
Using the freeze function 72
Using the on-screen display function
72
Using the automatic setup function
73
Using the screen adjustment function
73
Using the digital zoom function 74
Switching the image aspect ratio
75
Using the presentation timer function
75
Using the function button 75
Displaying internal test pattern 75
Using the status function 76
Using the ECO management function
76
Setting ID number of the remote control
76
Chapter 4 Settings
Menu navigation 79
Navigating through the menu 79
Main menu 80
Sub-menu 81

ENGLISH - 3
Contents
[PICTURE] menu
84
[PICTURE MODE]
84
[CONTRAST]
84
[BRIGHTNESS]
84
[COLOR]
85
[TINT]
85
[COLOR TEMPERATURE]
85
[GAMMA]
86
[DAYLIGHT VIEW]
87
[SHARPNESS]
87
[NOISE REDUCTION]
87
[DYNAMIC CONTRAST]
88
[SYSTEM SELECTOR]
88
[POSITION] menu
89
[SHIFT]
89
[ASPECT]
89
[ZOOM]
90
[CLOCK PHASE]
91
[REALTIME KEYSTONE]
91
[SCREEN ADJUSTMENT]
92
[ADVANCED MENU] menu
95
[DIGITAL CINEMA REALITY]
95
[BLANKING]
95
[INPUT RESOLUTION]
96
[CLAMP POSITION]
96
[RASTER POSITION]
97
[DISPLAY LANGUAGE] menu
98
Changing the display language
98
[DISPLAY OPTION] menu
99
[COLOR ADJUSTMENT]
99
[COLOR CORRECTION]
99
[SCREEN SETTING]
100
[AUTO SIGNAL]
100
[AUTO SETUP]
100
[RGB IN]
101
[HDMI IN]
102
[DIGITAL LINK IN]
103
[ON-SCREEN DISPLAY]
104
[CLOSED CAPTION SETTING] (only when
NTSC signal is input)
107
[SIGNAL SEARCH]
107
[BACK COLOR]
108
[STARTUP LOGO]
108
[SHUTTER SETTING]
108
[P-TIMER]
109
[FREEZE]
110
[DIGITAL ZOOM]
110
[PROJECTOR SETUP] menu 112
[PROJECTOR ID] 112
[PROJECTION METHOD] 112
[ECO MANAGEMENT] 113
[LightID] 115
[INITIAL STARTUP] 116
[STARTUP INPUT SELECT] 116
[DATE AND TIME] 117
[SCHEDULE] 11 8
[RS-232C] 119
[REMOTE1 MODE] 121
[FUNCTION BUTTON] 121
[LENS CALIBRATION] 121
[AUDIO SETTING] 122
[FILTER COUNTER] 124
[DC OUT] 125
[STATUS] 125
[DATA CLONING] 126
[SAVE ALL USER DATA] 129
[LOAD ALL USER DATA] 129
[INITIALIZE] 129
[SERVICE PASSWORD] 130
[TEST PATTERN] menu 131
[TEST PATTERN] 131
[SIGNAL LIST] menu 132
Registering new signals 132
Renaming the registered signal
132
Deleting the registered signal
132
Protecting the registered signal
133
Expanding signal lock-in range
133
Sub memory 134
[SECURITY] menu 135
[SECURITY PASSWORD] 135
[SECURITY PASSWORD CHANGE]
135
[DISPLAY SETTING] 135
[TEXT CHANGE] 136
[MENU LOCK] 136
[MENU LOCK PASSWORD]
136
[CONTROL DEVICE SETUP]
137
[CONTROL DEVICE PASSWORD CHANGE]
138

4 - ENGLISH
Contents
[NETWORK/USB] menu 139
[DIGITAL LINK MODE]
139
[DIGITAL LINK STATUS]
139
[DIGITAL LINK MENU]
140
[WIRED LAN]
140
[WIRELESS LAN]
141
[PROJECTOR NAME]
145
[NETWORK CONTROL]
145
[MEMORY VIEWER]
145
[Panasonic APPLICATION]
147
[MIRRORING]
149
[NETWORK STATUS]
150
Chapter 5 Operations
Network connection 153
Connecting via wired LAN
154
Connecting with the wireless LAN
156
Web control function
158
Computer that can be used for setting
158
Accessing from the web browser
158
Projecting with Panasonic APPLICATION input
178
Application that can be used
178
Connecting the device
178
Ending the connection with the device
178
Description of the standby screen
179
Using the moderator mode in the Panasonic
APPLICATION input
180
Projecting with MIRRORING input
181
Connecting the device
181
Ending the connection with the device
182
Using the moderator mode in the MIRRORING
input
182
Operating with the web browser
183
Description of the [MODERATOR MODE] page
184
Projecting with MEMORY VIEWER input
185
Images that can be played back with the
Memory Viewer function
185
Displaying the Memory Viewer screen
186
Operating the Memory Viewer screen
186
Playing back still images
188
Playing back movies
189
Description of the Memory Viewer screen
191
Playing back using the contents list
192
Using the pairing function
193
Pairing the USB memory
193
Chapter 6 Maintenance
Light source/temperature/lter indicators 196
When an indicator lights up
196
Maintenance/replacement 198
Before performing maintenance/replacement 198
Maintenance 198
Replacing the unit 200
Troubleshooting 202
FAQ 204
Wireless LAN connection 204
Mirroring connection 204
[SELF TEST] display 206
Chapter 7 Appendix
Technical information 209
PJLink protocol 209
Control commands via LAN 210
<SERIAL IN> terminal 213
<REMOTE 1 IN> terminal 216
Operating [MENU LOCK PASSWORD]
216
List of compatible signals 217
Specications 219
Dimensions 224
Precautions for attaching the Ceiling Mount
Bracket 225
Index 226

ENGLISH - 5
Read this rst!
Read this rst!
WARNING: THIS APPARATUS MUST BE EARTHED.
WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain
or moisture.
This device is not intended for use in the direct eld of view at visual display workplaces. To avoid
incommoding reexions at visual display workplaces this device must not be placed in the direct
eld of view.
The equipment is not intended for used at a video workstation in compliance BildscharbV.
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.
2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied
service personnel.
3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing-
type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are
unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the
earthing plug.
WARNING:
This equipment is compliant with Class A of CISPR32.
In a residential environment this equipment may cause radio interference.
(for Taiwan)
WARNING:
This equipment complies with the Class A standard of CISPR32.
This is Class A information technology equipment that may cause radio frequency interference when used in a
residential environment, in which the user will be required to take certain appropriate countermeasures.
CAUTION: To assure continued compliance, follow the attached installation instructions. This includes using
the provided power cord and shielded interface cables when connecting to computer or peripheral
devices. Also, any unauthorized changes or modications to this equipment could void the user’s
authority to operate this device.
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a
domestic environment.
Directive 2009/125/EC
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
WARNING: RISK OF ELECTRIC SHOCK. DON’T OPEN
or
Indicated on the projector
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.

6 - ENGLISH
Read this rst!
WARNING: Do not look at the light emitted from the lens while the projector is being used.
As with any bright source, do not stare into the direct beam.
Indicated on the projector
RG2 IEC 62471-5:2015
Notice on laser
(for USA and Canada)
This projector is the Class 3R laser product that complies with IEC 60825-1:2007.
(Inside of product)
Indicated on the projector
(for India)
This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

ENGLISH - 7
Read this rst!
(for other countries or regions)
This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.
CAUTION: Use of controls or adjustments or performance of procedures other than those specied herein
may result in hazardous radiation exposure.
CAUTION (North/Middle/South America/Taiwan)
Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.
CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for
power supplies up to 125 V. If you need to use higher voltages than this, you will need to obtain a
separate 250 V power cord. If you use the accessory cord in such situations, re may result.
CAUTION (North/Middle/South America/Taiwan)
This equipment is equipped with a three-pin grounding-type power plug. Do not
remove the grounding pin on the power plug. This plug will only t a grounding-type
power outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact an electrician. Do not defeat the purpose of the grounding plug.
Do not remove
WARNING (USA and Canada)
fNot for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
fFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the
building installation wiring.
fFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
NOTIFICATION (Canada)
This class A digital apparatus complies with Canadian ICES-003.
For USA-California Only
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate

8 - ENGLISH
Read this rst!
FCC NOTICE (USA)
Verication
Model Number: PT-MZ670 / PT-MZ670L / PT-MW630 / PT-MW630L /
PT-MZ570 / PT-MZ570L / PT-MW530 / PT-MW530L
Trade Name: Panasonic
Responsible Party: Panasonic Corporation of North America
Address: Two Riverfront Plaza, Newark, NJ 07102-5490
General Contact: http://www.panasonic.com/support
Projector Contact: https://panasonic.net/cns/projector/
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
FCC Warning:
To assure continued compliance, follow the attached installation instructions. This includes using the provided
power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any
unauthorized changes or modications to this equipment could void the user’s authority to operate this device.

ENGLISH - 9
Read this rst!
IMPORTANT: THE MOLDED PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 13 amp fuse
is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 13 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you
lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover
can be purchased from an Authorized Service Center.
If the tted molded plug is unsuitable for the mains socket in your home, then the fuse should be
removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the
cut off plug is inserted into any 13 amp socket.
If a new plug is to be tted, please observe the wiring code as shown below.
If in any doubt, please consult a qualied electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are colored in accordance with the following code:
Green - and - Yellow: Earth
Blue: Neutral
Brown: Live
As the colors of the wire in the mains lead of this appliance may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows.
The wire which is colored GREEN - AND - YELLOW must be connected to the terminal in the plug
which is marked with the letter E or by the Earth symbol or colored GREEN or GREEN - AND -
YELLOW.
The wire which is colored BLUE must be connected to the terminal in the plug which is marked
with the letter N or colored BLACK.
The wire which is colored BROWN must be connected to the terminal in the plug which is marked
with the letter L or colored RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
Importer’s name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany

10 - ENGLISH
Read this rst!
Hazard distance (IEC 62471-5)
The distance at which the level of exposure has dropped to the level of the applicable Exposure Limit Value is
known as the hazard distance or safety distance.
Do not look or stare into the light beam from a distance closer than the hazard distance (RG3 = risk group 3).
Beyond this distance the light beam is considered to be safe. (RG2 = risk group 2)
RG3 level is considered to be a hazard to the eyes from direct radiation.
RG2 level does not pose any optical hazard and can be safely used in all situations.
Hazard Distance Hazard Distance
RG2
HD
D3
D4
RG3
RG2
HD
D1
D2
RG3
(Unit: m)
Lens HD*1 D1*2 max. D2*2 max. D3*2 max. D4*2 max.
ET-ELW21 < 1.0 0.97 0.97 1.13 1.13
ET-ELW22 < 1.0 0.89 0.89 1.03 1.03
ET-ELW20 < 1.0 0.62 0.62 0.72 0.72
Standard Zoom Lens/
ET-ELS20 < 1.0 0.47 0.47 0.55 0.55
ET-ELT20 < 1.0 0.29 0.29 0.34 0.34
ET-ELT21 1.9 0.34 0.34 0.39 0.39
*1 Hazard Distance
*2 D1, D2, D3, and D4 change in accordance with projection lens shift amount. Each number in this table is worst case.
Note
fEach table complies with IEC 60825-1 (2014) and IEC 62471-5 (2015)