Panasonic ET-PKE1000S User manual

181
Ø9.5 (3/8˝)
Ø8.5
(11/32˝)
70
PT-AE1000
Attachement plate
20 (2-9/16˝)
150 (5-29/32˝)
150 (5-29/32˝)
160 (6-5/16˝)
82 (3-7/32˝) 32 (1-1/4˝)
140 (5-1/2˝)
114 (4-1/2˝)
130 (5-1/8˝)
104 (4-3/32˝)
(2-3/4˝)
25
(31/32˝)
(7-1/8˝)
65
(2-9/16˝)
SPEC FILE
ET-PKE1000S
Ceiling mount bracket
As of November 2006 <1>
Specifications Vertical correction angle: +5°, -15°
Horizontal slant correction angle: ±10°
Horizontal turn correction angle: ±5°
Dimensions (W x H x D): 468 x 200 x 191 mm (18-7/16˝ x 7-7/8˝ x 7-17/32˝)
Weight: 1.9 kg (4.2 lbs)
Attachment plate
Illustration shows the ET-PKE1000S attached to
the projector.
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . 1
Safety fitting A . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting B . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting C . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted screws (M4 x 8) . . . . . . . . . . . 10
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . 2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is to be used when mounting home cinema projectors to the ceiling.
Caution:
• All mounting work must be done by a qualified technician.
• Ensure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions carefully before starting the mounting procedure.
• When the system is no longer to be used, have a qualified technician promptly remove and dispose of it.
• Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool
should be used.