Panasonic CT-32XF55 User manual

Panasonic
SuperFlat™ System Monitor-Receiver
Operating Instructions
CT-32XF55
CT-32XF55C
wy il) a TQB2AAD2706-2 81210
PRINTED IN USA

Read these instructions completely before operating.
Contents are subject to change without notice or obligation.
Copyright 1998 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law.
WARNING
d Zi = =
WARNING: To reduce the risk of electric shock do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrow The exclamation point within a
head within a triangle is triangle is intended to tell the
intended to tell the user that user that important operating
parts inside the product are a and servicing instructions are in
risk of electric shock te persons. the papers with the appliance.
WARNING: To prevent fire or shock hazard, do not expose this appliance
to rain or moisture.
Certain audio features of this product manufacture under a license from Desper Products, Inc.
Spatializer® and the circle-in-square device and trademarks owned by Desper Products, Inc.
Spatializer U.S. Patents are: 4,308,423; 4,355,203 and 5,412,731.
Panasonic Canada Inc.
5570, Ambler Drive
Mississauga (ONTARIO)
Canada L4W 2T3
Tél: [phone]
Télécopieur: [phone]
www.panasonic.ca/fdbcka.htrm

TABLE OF CONTENTS
Table of Contents
Congratulations...…........... ne E NER ae
Customer Recorda reine nn rene A me eat 2
Care and Cleaning; assauts 2
SDeCITICATO IS ad mn lisent esse rte te st en en eus den 2
Important Notes............... D
Television Location. eo t terrre ehe rn inverno ev xa aea sidi 3
Optional Cable Connections ss 3
AC Power Supply Cord..…................. 3
Cable / Antenna Connections ............. eese eene 3
Getting Started ......0.........cccccccccensscscesssssssneceeeesesssvsrerseancorereseersces 4
Step 1 - Connect AC Cable Cord ................eeeeseeeeeeneenm ee 4
Step 2 - Antenna Connections without Cable Box... 4
Step 2a- Antenna Connections with Cable Box... 4
Step 3 - Turning Set ON rires 5
Step 4 - Roller Guide Menu... 5
Step 4a- ACTION / Navigation Button... 6
Step 5 = Languagjo ne den Se out tuo cio congu aes cord Pv ETE RS 6
Step. B - Prog Chan: tm bres Proto PER ere nda 6
instalation 5.558 ———————— a dise 7
Antenna Connection with a VER... ss 7
Antenna Connection with a Cable Box and VCR ................................. 8
Optional Equipment Connections ................seeeneennnes 9
Amplifier Connection (To Audio Amp) ...........:::cccccccceeeteecseeeeessesesnneeaes 9
Program Out Connection (Prog Out)... 9
Home Theater Connection... 10
PIP (Picture in Picture) Operation ses 11
Without a VCR / With a VCR and Cable Box... 11
Wiha VOR erro ttm er ri veep Sion t vm Pe PY EARS VERE XXE YA 12
Roller Guide Menu wciissscsshetecevisverisenacevctsnnacotdecuscanvesncsicteveueesnets 13
Navigation / ACTION Button... rennen 13
Roller Guide Feature Chart ...............................eeeeeeee cerent 14
Special Features... ooo esos ns ét eret la depre roS a Ure lari uu son GER ospean iSS 17
LANJUADOB nement 17
Program Channels e 17
Closad Caption soins nine tie 18
AUTO POWGE Mc 19
Other AGILISIMENLS urnes in aora doe v ERO eX 6S Nor uR vd 19
GIOCK Bab oa dad Tn b a Ten 20
Sleep TIMOR DO PR ORAE van tices d EAE P Oda tee da etna 20
Program Timer 1t and 2... inner 21
Video Adjustmenls vii vera Rs n bu rn nt 22
Other AdjuStMents ....2 1 nn nantaise 22
Audio Adjustments ................. e 1eoeerr rernm tren rro eonun nonas 23
Other Adulte. uer bi bevor ot iN rear arie iva UE 23
SUTOUNT ente 24
Channels Favorites: ......... ie raoe tact ipe erbe a ag euren ck ea eo eT exei eo
Channel CabbriS"; stetit Rr e oath ded ope PO ED end 25
Channels Lock, Game Guard, and AI... 26
Unlocking Channels, Game Guard, and AI... 28
Digital TV Set-Top Box (DTV-STB) Connection.....................29
CIOS SAE MT its oO
Frequently Asked Questions About Digital [iE
Troubleshooting Chart ........................ es —— I ©

CONGRATULATIONS
Congratulations
Your new Television features state-of-the-art technology for high-quality picture and
sound with complete audio/video connections for your home theater system. Standard
television signals are displayed in a progressive format, providing a clear, crisp picture
without visible scan lines. This is also DTV (Digital TV). When connected to a
Panasonic digital TV set-top box, this TV can display high-definition (HDTV) 1080
format and standard definition (SDTV) 480p format. Your new is designed to give you
many years of enjoyment. It was thoroughly tuned and tested at the factory for best
performance.
Customer Record
The model and serial number of this product are located on the back of the TV. You
should note the model and serial number in the space provided and retain as a
permanent record of your purchase. This will aid in identification in the event of theft
or loss. Product registration is available at: www.prodreg.com\panasonic.
Model xc ue eceee IE
Number
Serial 3
Number
Care and Cleaning
Specifications
T.V Screen (Turn Off)
The screen is a high precision lens system which has a protective screen.
The screen is fully washable with the following precautions:
OQ Use a mild soap solution or window cleaner and a clean cloth.
+ DO NOT USE ABRASIVE CLEANERS.
+ Donot use laundry detergent or automatic dishwasher soap.
+ Donot use alcohol, ammonia, or petroleum based products.
Avoid excessive moisture and wipe dry.
* Prevent solution from running into the receiver below.
O Avoid bumping or scraping the screen.
Cabinet and Remote Control
O For cabinets and Remote Control, use a soft cloth dampened with water or a mild
detergent solution. Avoid excessive moisture and wipe dry.
CJ Do not use benzene, thinner or other petroleum based products.
Power Source
CT-32XF55 120V AC, 60Hz
Channel Capability - 181 VHF-12; UHF-56; Cable-125
Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks 500mV RMS 47K Ohm
Audio Output Jacks 0-2.0V RMS 4.7K Ohm
S-Video Input Jacks S-Video (Y-C) Connector
DTV Input (Y / Pe / PR) 75 Ohm, Phono Jack Type
Specifications are subject to change without notice or obligation.

IMPORTANT NOTES
Important Notes
Television Location
This unit can be used as an entertainment center. Consult your deater for available options.
D Avoid excessive sunlight or bright lights, including reflections.
O Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
O Fluorescent lighting may reduce Remote Control transmitting range.
O Keep away from magnetic equipment, including motors, fans, or external speakers.
Optional Cabte Connections
Shielded audio and video cables should be used between components. For best results:
O Use 75-ohm coaxial shielded cables.
O Check type of output and input connectors on your components.
O Determine required cable lengths.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A Polarized Plug
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE t=
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Cable / Antenna Connections
For proper reception, either a cable or antenna connection is required.
Cable Connection Incoming Cable from
à Cable Company
Connect the cable supplied by your local cable company or select
Antenna 1 or 2 (Ant 1 or Ant 2) if you do not have cable.
fy
Note: A cable converter box may be required for proper reception. Comm
Check with your local cable company for compatibility 75 Ohm VHF/UHF
requirements.
on
back
of
TV
Antenna Connections
+ For proper reception of VHF/UHF channels, an external antenna is
required. For best reception an outdoor antenna is recommended.
e Select Antenna 1 and Antenna 2, in the Roller Guide SET
UP Menu under Prog. Chan.
MX
= We Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to TV Mode
(antenna) for antenna use in the Set Up
Menu.
Incoming Cable from
Home Antenna
@

GETTING STARTED
Step 1 - Connect AC Power Cord to an AC Outlet
Step 2 - Antenna Connection - No Cable Box
Follow this diagram when connecting the TV system to Cable TV System (without
cable box) or Antenna.
Note: No additional connections are required for split screen operation.
Incoming Cable from
Cable TV system or ED!
Antenna
ANT 1 SPLIT OUT ANT2
TERMINALS ON BACK OF TV
Step 2a- Antenna Connection with Cable Box
Follow this diagram when connecting the TV system using a Cable Box.
Note: No additional connections are required for split screen operation.
Cable Box
Incoming Cable from
Cable Company
ANT 1 SPLIT OUT ANT 2
TERMINALS ON BACK OF TV
Note: in the SET UP menu choose AUTO POWER SET to power up the TV at the same
time as the Cable Box or other components.
Procedure
* The Remote Control must be programmed with supplied codes to operate the
Cable Box. (See Programming the Fiemote Control.)
* Press the Remote Control TV mode button «o x
* Select ANT 2 to view the Cable Box, located in the Roller Guide Set Up Menu
under Prog Chan.
* Turn the TV to the appropriate channel for the Cable Box (channel 3 or 4).
+ Press the Remote Control CBL button.
* Use the Remote Control CH (channel) up/down buttons or the numeric keypad for
selecting channels using the Cable Box.

GETTING STARTED
Step 3 - Turning Set On
Press the Remote Control TV mode button «o
Then press the POWER button Gowen).
Step 4 - Roller Guide Menu
Press the ACTION button in the middle of the large blue button on the Remote Control
to display the Roller Guide Menu'"*. Press the CH (channel) up/down to rotate the
Roller Guide. Press the left VOL (volume) button to exit the Roller Guide Menu.
* U.S. Patent Pending
Panasonic
J ROLLER GUIDE MENU SELECTIONS
al
|
CHANNELS! |
|
|
|
ew» m
e
SET UP PICTURE AUDIO
m
Xj FOR MORE FEATURES
ai SB ANOUAOU BASES UM
Note: To exit the Roller Guide Menu, press the left VOL (volume) arrow on the
ACTION button.
Step 4a- ACTION / Navigation Button
Press the ACTION button to select main menu items. Press the CH (channel) up/
down arrows to highlight sub menus. Press the right VOL arrow to select and adjust
features. Press the ACTION button to return to sub menus.
Remote ACTION / Navigation Button
CH
ô
vot[ <] D ] vor
V
CH
Note: Be careful to press ACTION in the middle of the button. If you do not press in the
middle of the button, the CH (channel) or VOL volume keys may be activated.

GETTING STARTED
Step 5 - Language
In SET UP Menu, select IDIOMA / LANGUE to change menu language to ENGLISH,
ESPANOL, or FRANCAIS
Press ACTION to exit menus.
ENGLISH
OTHER ADJ.
Step 6 - Prog Chan
In SET UP Menu, Select PROG CHAN to select choices.
Press A, V, 4 or P to select:
O Cable Mode/ TV Mode
* Select MODE to change between TV (antenna) MODE or CABLE MODE depending on the signal source.
Q Antenna
* Select Antenna to change between ANT 1 or 2 depending on the input on back of TV.
Q Program Auto
* Select PROGRAM AUTO to automatically program all channels with a signal.
O Program Manual
+ Select PROGRAM MANUAL to manually add or delete channels.
Press ACTION to exit menus.
c
SET UP
IDI
LARGUE
€
TV
. PROG CH,
iam
CHAN
>
ANTENNA
ANT
1
FONS
cua
p
|
AUTO
POWER]
SUPREME
PROGRAM
MANUAL
p
OTHER ADJ.

INSTALLATION
Antenna Connection with a VCR
Follow this diagram when connecting the TV system using a VCR.
Note: No additional connections are required for split screen operation.
When connecting S-Video Input (1 or 2), connect the S-Video cable instead of the
standard video cable.
|
f AUDIO VIDEO |
l rma
l R L Pr Pe Py |
DIGITAL
OO (9 (9) (9) wwe: |
l VIDEO S-VIDEO |
©) ©) ©) G- INPUT 1 |
I
OOOO mur:
| |
|
l TEE PROG. OUT |
|
MC,
tl
|
d
—
|
© m. © CENTER CHANNEL j
i INPUT l
| l | uoo |
| | |
l ANT INPUTS INCOMING CABLE
I Of
| l
| ANT OUTPUT
i © -H
CABLES NOT SUPPLIED
TERMINALS ON BACK OF VCR
Procedure
e The Remote Control must be programmed with supplied codes to operate the
VCR. (See Programming the Remote Control.)
* Press the Remote Control TV mode button ;
e Select TV or Cable and ANT 1, if necessary, located in the Roller Guide Set Up
Menu under Prog Chan.

INSTALLATION
Antenna Connection with Cable Box and VCR
ANT OUTPUT
Follow this diagram when connecting the TV system using a Cable Box and VCR.
Note: When connecting S-Video Input (1 or 2), connect the S-Video cable instead of the
standard video cable.
[
| AUDIO VIDEO
| © ©
| DIGITAL
| | ©) v INPUT
@r Se © © KO
AUDIO OUT D : OC)" INPUT 1
©: e
VIDEO OUT I
|
|
|
|
]
|
nl: COO INPUT 2 |
| OO INPUT 3 |
mA
aO
|
|
|
j
Ji
VIDEO IN f PROG.OUT
I
aunioin ‘I |
|
|
ES (2 CENTER CHANNEL
INPUT
€ "rg Meo
|
J
ANTINPUT |
OB
eu
CABLE BOX
CABLES NOT SUPPLIED
TERMINALS ON BACK OF VCR
Procedure
* The Remote Control must be programmed with supplied codes to operate the
VCR and Cable Box. See Programming the Remote Control.
*« Press the Remote Control TV mode button «o
e Select ANT 2 mode located in the Roller Guide Set Up Menu under Prog Chan to
view Cable Box.
e Turn the TV to the appropriate channel for the Cable Box (usually channel 3 or 4).
e Press the Remote Control CBL mode button.
+ Use the Remote Control CH (channel) up/down buttons or the numeric keypad for
selecting channels using the Cable Box.
* Turn VCR on channel 3 or 4.

INSTALLATION
Optional Equipment Connections
VCR's, video disc players, video game consoles, and DSS equipment can also be
connected. See the optional equipment manual for full details.
TERMINALS ON BACK OF TV)
AUDIO
©
96 DIGITAL
© » (INPUT
ID
E
fe) Se JL INPUT 1
VIDEO
|
l
|
i
i
- 7 |
pa NPUT ]
|
6
©.
©OOG
wer
!
l © QO ©O©© © INPUT 3 |
L FLUID To upto ©)
| oureur we OO o OUT l
| |
e
|
|
Lo
mom
m
©
CENTER
CHANNEL
O}
jo)
Gi
TERMINALS ON BACK OF VCR E Oo INPUT ANT1 SPLIT OUT ANT2
]
Procedure
1. Connect equipment to rear Audio/Video input jacks as shown.
2. Select the corresponding video input mode by pressing TV/VIDEO button.
3. Operate optional equipment as instructed in equipment manual.
Note: The S-VIDEO connection is optional and overrides other VIDEO connection.
Amplifier Connection (TO AUDIO AMP)
Connect to an external audio amplifier input for listening through a stereo system.
Note: TO AUDIO AMP terminals cannot and should not be connected directly to
external speakers.
Audio Adjustments
Ste NS
Select TV SPEAKERS ON located in the AUDIO Menu.
Set amplifier volume to minimum.
Adjust TV volume to desired level.
Adjust amplifier volume to match the TV.
Select AUDIO SOURCE, EXT & VAO (Variable Audio Out) from AUDIO menu
to contro! speakers from the TV or select EXT and FAO (Fixed Audio Out) to
contro! speakers from the external amplifier.
Volume, mute, bass, treble and balance are now controlled from the TV, if you
select VAO mode.
Program Out Connection (PROG OUT)
For monitoring the TV audio and video with optional video equipment, connect to
PROG OUT terminals on the back of the TV.
Procedure
1.
2.
3.
Connect optional video equipment input to the PROG. OUT (R/L Audio and
Video) terminals.
PROG. OUT terminal display is the same as the picture on the TV.
See optional equipment manual for further instructions for recording or
monitoring.

INSTALLATION
Home Theater Connection
Your TV internal speakers can be connected as the center channel for a surround sound
home theater system. Connect a surround sound amplifier (center channel speaker
output) to CENTER CHANNEL INPUT on the back of the TV, as shown. CENT
SPEAKER & FIXED AUDIO OUT must be selected in the AUDIO Roller Guide Menu
under SPEAKERS.
TERMINALS ON BACK OF TV
iml] — "umm i Aupo VIDEO
I" dc © © © © © sv inpor
ex © QO O0: INPUT 1
(1) Pol niis | © © OOG- INPUT 2
(2) Insert bare wire | o S 2 INPUT 3
into hole and
TO AU WO
release button. AMP
|m ===
Surround Amplifier VCR
|= man
Video
Component
de 3.
NL. AN,
mat :
Left Front amd Right Front
k k
Speaker TV Speakers Speaker
Center Channel
Left Rear l A - Right Rear
Surround Speaker Surround Speaker
=> Listener <=
—

PicTURE IN PICTURE (PIP) OPERATION
Picture In Picture (PIP) Operation
With / Without A VCR And Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two
(2) live broadcasts at the same time without or with an external video source (VCR).
Without A VCR (External Video Source)
Procedure
. Connect incoming cable to antenna (ANT) input on back of TV.
° Press the PIP button on the Remote Control to display the PIP frame.
Note: The audio is for the Main Picture, only.
* Choose channels for the PIP frame by pressing the Remote Contro! PIP
CHANNEL up/down buttons.
° Choose channels for the Main Picture by pressing the Remote Control CH
up/down buttons or by using the numeric keypad.
With A VCR (External Video Source) And Cable Box
Connect your television to a VCR and Cable Box, as shown.
VCR
— ER,
l AUDIO VIDEO I
r sVDEH 7 I PR Pr 1
|
|
©
Maur
VIDES g-ViDEO
ral CE ©CO00)- INPUT 1 |
l'uooout t ©) O, OO- zx
l e | INPUT 3 l
TO AUDIO 5) O c 1
|
vicios
—
PS
Qu
|
a
l AUDIO IN ] l ai. aa ©, mo 2, l
l | Es D vy 9?
| ANT INPUT INCOMING CABLE
| ANT A - CABLES NOT SUPPLIED
L — = . 47
TERMINALS ON BACK OF VCR CABLE BOX
Note: The Remote Control must be programmed with supplied codes to operate the VCR
and Cable Box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note: The audio is from the Main Picture only.
To view scrambled channels through your Cable Box in the PIP frame:
° Press the TV/VIDEO button on the Remote Control to select the same video
input which your cable box is connected to.
. Verify the CABLE BOX and VCR are ON and the VCH tuned to channel 3.
. Choose channels for the P/P frame by pressing the CBL button on the Remote
Contro! and using the numeric keypad or CH up/down buttons.
. Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down buttons.
Note: The SWAP button switches the PIP and Main Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.

PicTURE IN PICTURE (PIP) OPERATION (CONT.)
Picture In Picture (PIP) Operation (Cont.)
With a VCR - No Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two
(2) live broadcasts at the same time without or with an external video source (VCR).
Connect your television to a VCR, as shown
The Remote Control must be programmed with the supplied codes to operate the VCR. See
Programming the Remote Control! in the Remote Control Quick Reference Guide.
1
AUDIO
VIDEO
R
t
Pa
Phe
Pr
]
0000
TY
INPUT
|
©
OOO-
INPUT
1
f
OO- INPUT 2
INPUT 3
©
'
0
AUDI
CS
VIDEO
IN
2)
©
©)
|
|
|
|
PROG. OUT
AUDIO IN © y
i 2 C
ANTINPUT =- SSS 7T a Sea =
INCOMING CABLE
oil
|
ANT OUT E
CABLES NOT SUPPLIED
TERMINALS ON BACK OF VCR
Procedure
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: | The audio is from the Main Picture only.
To view an external video source in the PIP frame:
. Press the TV/VIDEO button on the Remote Control to select the same video
input which your VCR is connected to.
° Verify the VCR is on.
. Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down button.
° Choose channels for the PIP trame by pressing the TV button on the Remote
Control and using the PIP Channel up/down buttons
SWAP and RECALL Buttons
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.

ROLLER GUIDE MENU
Roller Guide Menu
Press the ACTION button in the middle of the large blue button on the Remote Control
to display the Roller Guide Menu™*. Press the CH (channel) up/down to rotate the
Roller Guide. Press the left VOL (volume) button to exit the Roiler Guide Menu.
* U.S. Patent Pending
Ny] FOR MORE FEATURES
PRESS [Ail oN| TO SELECT
Note: To exit the Roller Guide Menu, press the left VOL (Volume) arrow on the
ACTION button.
ACTION / Navigation Button
Press the ACTION button to select main menu items. Press the CH (channel) up/
down arrows to highlight sub menus. Press the Right VOL (volume) arrow to select
and adjust features. Press the ACTION button to return to sub menus.
Remote ACTION / Navigation Button
CH
Note: Be careful to press ACTION in the middle of the button. If you do not press in the
middie of the button, the CH (channel) or VOL (volume) keys may be activated.

ROLLER GUIDE FEATURE CHART
Roller Guide Feature Chart
;
C) Select English, Spanish, or French menu.
O MODE - Select Cable or TV (Antenna).
See Installation section in Manual.
C) ANTENNA - Select ANT 1 or ANT 2.
O AUTO PROGRAM - Automatically program
channels with a signal into memory.
O MANUAL PROGRAM - Manually add or
delete channels from memory.
O CC ON MUTE - Select C1-C4 for Closed
Captioning display when the Remote
MUTE button is pressed.
(Closed Captioned) C) CC MODE - Select T1-T4 or C1-C4 for
transmitted information, if available, in
large black box.
CJ AUTO POWER - Select SET to power up
AUTO POWER the TV at the same time as the Cable Box
or other components.
O ASPECT - Will change the screen from 4:3
OTHER ADJ. to 16:9.
(Adjustments) C) DTV AUTO - Select ON to view digital
broadcasts, when available.
PROG. CHAN
(Program Channels)
O MODE - Select STEREO, SAP (Second
Audio Program) or MONO. (Use MONO
when stereo signal is weak.)
O BASS - Increase or decrease the bass
response.
O TREBLE - Increase or decrease the treble
response.
O BALANCE - Emphasize the left/right
speaker volume.
Q NORMAL - Reset BASS, TREBLE and
BALANCE to factory default.
SURROUND O SPATIALIZER® k Three dimensional
surround sound with two speakers.
AUDIO ADJ.
(Adjustments)

ROLLER GUIDE FEATURE CHART
Roller Guide Feature Chart (Cont.)
DESCRIBTION,
AUDIO
Al SOUND - Automatically adjust volume to
OTHER ADJ. maintain a comfortable listening level.
(Adjustments) SUB WOOFER - Will amplify the low
sounds in the broadcast.
ON - Speakers operate normally.
OFF & VAO (Variable Audio Output) -
TV speakers off - audio adjustable by TV.
OFF & FAO (Fixed Audio Output) - TV
speakers off - audio adjustable only by the
external amplifier.
DOLBY & CENTER MODE & FIXED
AUDIO MODE - TV speakers provide center
speakers for Dolby sound transmission
available on video or laser disc.
When set, TIME will display on-screen after
CLOCK SET pressing POWER button, RECALL button,
or changing channels. (Clock must be set
to use Timer features.)
SLEEP C) Set timer to turn off TV in 30, 60, or
90 minutes. Select NO to turn timer off.
Q Set two timers to automatically turn TV on
TIMER 1 and off at selected times, on selected
TIMER 2 channels, and on selected days. (Clock
must be set to use Timer features.)

ROLLER GUIDE FEATURE CHART
Roller Guide Feature Chart (Coni.)
|
PICTURE
COLOR - Adjust desired color intensity.
TINT - Adjust natural flesh tones.
BRIGHTNESS - Adjust dark areas for crisp
detail.
PICTURE - Adjust white areas of picture.
SHARPNESS - Adjust clarity of outline
detail.
NORMAL- Reset all picture adjustments to
factory default settings.
COLOR TEMP - Adjust white balance to
COOL (blue), WARM (red) or NORMAL.
AUTO COLOR - Automatically optimize
OTHER ADJ. color adjustment to compensate for signal
variations.
Al PICTURE - This feature increases the
resolution in the picture.
3D Y/C FILTER - To minimize noise or
cross color in the picture.
VIDEO ADJ.
(Adjustments)
(Adjustments)
CHANNELS
CHANNEL SCAN - Select FAV (15
FAVORITES favorites) or ALL channels to scan
channels using the CH up/down buttons.
PRESET CAPTION - Enter channel
numbers for preset captions.
CAPTION MANUAL CAPTION - Enter channel
numbers and captions manually.
INPUT LABEL - Label video connections for
on-screen display of optional equipment.
AN
LOCK
CHANNEL O Select channels to lock out for 12, 24, or 48
hours with a secret code.
C) Lock out video games, cable box, and
GAME GUARD VCR's from being viewed for 12, 24, or 48
hours with a secret code.
C) Lock out all channels and video inputs for
12, 24, or 48 hours with a secret code.

SPECIAL FEATURES
Special Features
SET UP
Language
In SET UP Menu, select IDIOMA / LANGUE.
Press the 4 or » to change menu language to ENGLISH, ESPANOL, or FRANCAIS.
Press ACTION to exit menus. |
ENS -—
MODE ENGLISH
Prog Chan (Program Channels)
In SET UP Menu, select PROG CHAN.
Press the a, v, < or > to select:
O MODE - TV (antenna) or CABLE MODE depending on the signal source.
C) ANTENNA 1 or 2 - Depending on the input on back of TV.
O AUTO PROGRAM - To automatically program all channels with a signal.
O MANUAL PROGRAM - To manually add or delete channels.
Press ACTION to exit menus.
Ty MODE TV
BROGICHAN
REL > ANTENNA ANT 1
AUTO PROGRAM »
OTHER ADJ. ^ MANUAL PROGRAM.

SPECIAL FEATURES
[CC] (Closed Captioned)
This television contains a built in decoder that is capable of providing a visual
depiction of the audio portion. The program viewed must include Close Captioning
(CC) for the television to display it. is displayed in the form of text across the
screen (white or colored letters on black background). It allows the viewer to read the
dialogue of a television program or other information.
[CC] Mode
C) In Set Up Menu, select (Closed Caption).
C) Press the A or v to select [CC] MODE.
O Press now 4 or » to select OFF, C1, C2, T1, T2, C3, C4, T3 or T4:
. CAPTION OFF - Use when Closed Caption is not desired.
. CAPTION C1 - For video related information that can be displayed (up to 4 lines of
script on the screen, where it does not obstruct relevant parts of the picture}. Script
can be in any language.
e CAPTION C2 - Another Mode used for video related information.
. CAPTION C3 and C4 - Other Modes used for video related information.
. TEXT T1 - Blanks out a large portion of the picture on the television screen, and
displays program guide or any other information currently being transmitted.
. TEXT T2, T3 & T4 - Other Modes that display information and blank out a large
portion of the picture on the television screen.
C) Press ACTION to exit menus.
[CC] On Mute
Activates the On screen Closed Caption feature when the MUTE button on the
Remote Control is pressed. To deactivate press the MUTE button again.
Note: This feature only functions when the Closed Caption Mode is in the "OFF"
position. The program being viewed must be broadcast with Closed Caption.
(Refer to your local TV guide).
In Set Up Menu, select (Closed Caption).
Press the a or v to select ON MUTE.
Press now «4 or » to select No, C1, C2, C3, or C4.
Recommended Set Up for Closed Caption when using the MUTE button:
. ON MUTE: C1
. MODE: OFF
Press ACTION to exit menus.
Press Mute when the program being viewed is broadcast with Closed Caption to
activate. |
Note: Press MUTE again to deactivate.
ooon
aug
IDIOMA/
LANGUE
CC QNMUTE C1]
CCR > MODE OFF
AUTO POWER]