Panasonic DMREZ485V - DVD RECORDER - MULTI LANGUAGE User manual

Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
Operating Instructions
DVD Recorder
Model No. DMR-EZ485V
DMR-EZ48V
Region number supported by this unit
Region numbers are allocated to DVD players and DVD-Video according to where they are sold.
The region number of this unit is “1”.
The unit will play DVDs marked with labels containing “1” or “ALL”.
Example:
1ALL 24
1
[For\U.S.A.]only]
The warranty can be found on page 94.
[For\Canada]only]
The warranty can be found on page 95.
La referencia rápida en español se encuentra en la página 96−99.
PPC RQT9056-P
Basic Operations
P15
If you have any questions contact
In the U.S.A.: 1-800-211-PANA(7262)
In Canada: 1-800-561-5505
DMR-EZ48VP.indb1DMR-EZ48VP.indb1 2007/12/1320:42:192007/12/1320:42:19
Downloaded From Disc-Player.com Panasonic Manuals

2
RQT9056
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND THAT NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE
PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of suffi-
cient magnitude to constitute a risk of electric shock
to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the ap-
pliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended
by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
The socket outlet shall be installed near the equipment and
easily accessible. The mains plug of the power supply cord shall
remain readily operable. To completely disconnect this apparatus
from the AC Mains, disconnect the power supply cord plug from
AC receptacle.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded interface
cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMR-EZ485V
DMR-EZ48V
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-7262
(Inside of product)
Precautions
DMR-EZ48VP.indb2DMR-EZ48VP.indb2 2007/12/1320:42:212007/12/1320:42:21
Downloaded From Disc-Player.com Panasonic Manuals

3
RQT9056
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for
long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
Unit Care
The precision parts in the unit are readily affected by the
environment, especially temperature, humidity, and dust. Cigarette
smoke also can cause malfunction or breakdown.
Maintenance
To clean the unit
Wipe with a soft, dry cloth.
Never use alcohol, thinner or benzine to clean the unit.
Before using chemically treated cloth, carefully read the instructions
that came with the cloth.
To clean the DVD lens
Dust and dirt may adhere to the unit’s lens over time, possibly making it
impossible to record or play discs.
Use the DVD lens cleaner about once every year, depending on
frequency of use and the operating environment.
Carefully read the lens cleaner’s instructions before use.
DVD lens cleaner: RP-CL720PP
To clean the video heads
Dirt on the video heads can cause poor recording and play.
If the picture does not improve, use a head-cleaning cassette. If the
problem persists, seek advice from a qualified service person.
Head-cleaning cassette: NV-TCL30PT (Only for U.S.A.)
Do not place the unit on amplifiers
or equipment that may become hot.
The heat can damage the unit.
The unit should not be installed
or operated near large magnets
or electromagnetic devices. Such
devices can damage pre-recorded
VHS recordings.
Do not place any heavy objects on top of the unit.
The unit should not be mounted in a vertical position. It’s designed
to operate in the horizontal position.
Before moving the unit, ensure the disc tray and cassette
compartment are empty. Failure to do so will risk severely
damaging the disc, tape and the unit.
When the unit is not to be used for a long time
To save power, unplug the AC power supply cord from the household AC outlet. The unit consumes a small amount of power even when it is turned off.
Front Display (63)
Automatic Bright
Quick Start (58) On Approx. 17.6 WApprox. 17.6 W
Off Approx. 1.7 WApprox. 3.5 W
Standby power consumption
Cautions about condensation
Condensation can cause unreliable playback of recordings.
Condensation may form in the following cases,
The unit is brought from cold surroundings into a well-heated room.
The unit is suddenly brought from cool surroundings, such as an air-
conditioned room or car, to a place which is hot and humid.
During rainy seasons.
In any of the above-mentioned conditions, do not operate the unit for at
least 2 hours. The unit is not equipped with a moisture sensor.
Getting Started
DMR-EZ48VP.indb3DMR-EZ48VP.indb3 2007/12/1320:42:212007/12/1320:42:21
Downloaded From Disc-Player.com Panasonic Manuals

4
RQT9056
Table of Contents, Accessories
Setting DVD On-Screen Menus.............................................. 50
Accessing the DVD On-Screen Menus ........................................ 50
DVD and Card Management .................................................. 52
Accessing the Management Menus............................................. 52
Setup Menus .......................................................................... 55
Set Channels Automatically......................................................... 55
Set Channels Manually................................................................ 55
Surf Mode .................................................................................... 56
Parental Rating ............................................................................ 56
Off Timer ...................................................................................... 57
Remote Control............................................................................ 57
Clock Settings .............................................................................. 57
Quick Start ................................................................................... 58
DivX Registration ......................................................................... 58
Restore Default Settings.............................................................. 59
Settings for Playback ................................................................... 59
Settings for Recording .................................................................60
Still Mode (paused video) ............................................................ 60
Black Level Control ...................................................................... 60
Dynamic Range Compression .....................................................60
Multi-channel TV Sound (Analog) ................................................ 61
Multi-channel TV Sound (Digital) ................................................. 61
Digital Audio Output..................................................................... 61
Select Audio Channel For DV Input ............................................. 62
Status Messages ......................................................................... 62
On-screen Language ................................................................... 62
Black Background (Analog) .........................................................62
Front Display ................................................................................ 63
Closed Caption ............................................................................ 63
TV Aspect .................................................................................... 64
4:3 TV settings for DVD-Video ..................................................... 64
4:3 TV settings for DVD-RAM ......................................................64
Component Output Signal............................................................64
Functions of HDMI ....................................................................... 65
Select Tape Length ...................................................................... 66
Jet Search.................................................................................... 66
Parental Rating List ................................................................ 67
Getting Started
Precautions............................................................................... 2
IMPORTANT SAFETY INSTRUCTIONS .................................. 3
Unit Care........................................................................................ 3
Accessories ................................................................................... 5
Remote Control Information........................................................... 5
Control Reference Guide.......................................................... 6
Main Unit........................................................................................ 6
The Unit’s Display .......................................................................... 6
Remote Control.............................................................................. 7
Rear Panel ..................................................................................... 7
Basic Connection...................................................................... 8
Connecting to a Television with Direct Cable or Antenna
(No Cable Box or Satellite Receiver) ........................................ 8
Connecting to a Television and a Cable Box.................................. 9
Connecting to a Television and a Satellite Receiver .................... 10
Connecting to a TV with an HDMI (High Definition Multimedia
Interface) Cable ...................................................................... 11
Setting the Channels and Clock ............................................. 12
Acquiring the setting information from the TV (VIERA)................ 14
Important Notes for Recording ............................................... 23
Advanced Recording .............................................................. 24
DVD Recording Modes and Estimated Disc Recording Time ......24
VHS Recording Modes and Estimated Recording Time .............. 24
When the format confirmation screen is displayed ...................... 25
When removing a recorded disc .................................................. 25
Selecting Audio Channels to record.............................................25
Specifying the Recording Time .................................................... 26
Flexible Recording ....................................................................... 26
Playing while you are recording ................................................... 26
Advanced Scheduled Recording ............................................ 27
To cancel a scheduled recording in progress............................... 27
Check, Change, or Delete Programs ........................................... 27
To release the unit from recording standby
(Before recording starts) ......................................................... 27
Recording from an External Device........................................ 28
Recording from a VCR, etc. ......................................................... 28
Recording from a DV Camcorder.................................................29
Advanced Disc Playback ........................................................ 30
Zoom in on video ......................................................................... 30
Menu Screens on the TV ............................................................. 30
Selecting Recordings to Play....................................................... 30
Search.......................................................................................... 30
Skip .............................................................................................. 30
Direct Play.................................................................................... 30
Quick View (Play 1.3) ................................................................ 31
Slow-motion Play ......................................................................... 31
Frame-by-Frame Viewing ............................................................. 31
Time Slip ...................................................................................... 31
CM Skip ....................................................................................... 31
Create Chapters........................................................................... 31
Changing Audio during Playback................................................. 31
Playing Playlists...................................................................... 32
Playlist Properties ........................................................................ 32
View Chapters.............................................................................. 32
Advanced Features
Setting Menus
Recordings−Editing ................................................................ 43
Accessing the Recording View.....................................................43
Editing Operations to Recordings ................................................ 43
Chapters−Creating, Editing .................................................... 45
Accessing the Chapter View ........................................................ 45
Chapter Operations...................................................................... 45
Still Pictures−Editing .............................................................. 46
Accessing the Album/Picture View...............................................46
Album/Picture Operations ............................................................ 46
Copying Still Pictures.............................................................. 48
Importing Still Pictures from an SD card or USB memory ........... 48
Copying Still Pictures via the Album View Screen ....................... 48
Deleting Still Pictures.............................................................. 49
Delete Navigator .......................................................................... 49
Advanced Editing
Other Settings
Other Settings......................................................................... 68
Using the Unit’s Remote Control to Operate the TV and the Set
Top Box (Cable Box, Satellite Receiver, etc.).......................... 68
Basic Operations
Playing MP3s.......................................................................... 33
Playing Still Pictures (JPEG) .................................................. 34
Playing DivX ........................................................................... 36
Advanced Video Cassette Playback ....................................... 37
Zoom in on video ......................................................................... 37
Fast-forward/Rewind .................................................................... 37
Slow playback .............................................................................. 37
Cue/Review.................................................................................. 37
Jet Search.................................................................................... 37
Jet Rewind ................................................................................... 37
VHS Index Search System (VISS)............................................... 37
S-VHS Quasi Playback (SQPB)................................................... 38
Repeat Playback .......................................................................... 38
Changing Audio during Playback................................................. 38
Adjusting the playback picture .....................................................38
Status Messages.................................................................... 39
On-screen Display Indicators for Video Cassette Playback ......... 39
Media Handling ..................................................................15
Inserting Discs........................................................................15
Inserting a Video Cassette .....................................................15
Inserting USB memory ...........................................................15
Inserting an SD Card..............................................................15
Watching Television............................................................16
Playback.............................................................................17
Playing a Disc......................................................................... 17
Playing a Video Cassette........................................................17
Recording Television Programs..........................................18
Scheduled Recording.........................................................19
Copying Recordings...........................................................20
Copying Recordings (VHS DVD) .......................................20
Copying Recordings (DVD VHS)........................................21
Deleting Recordings...........................................................22
Delete Navigator..................................................................... 22
Deleting Recordings During Playback ....................................22
Linked Operations with the TV
(VIERA Link TM “HDAVI Control TM”) ................................... 40
Easy control only with VIERA Remote Control...................... 41
FUNCTIONS Window........................................................ 42
Entering Text........................................................................... 42
DMR-EZ48VP.indb4DMR-EZ48VP.indb4 2007/12/1320:42:222007/12/1320:42:22
Downloaded From Disc-Player.com Panasonic Manuals

5
RQT9056
About batteries
Insert so the poles (and ) match those in the remote control.
Do not use rechargeable type batteries.
R6/LR6, AA
Do not mix old and new batteries.
Do not use different types at the same time.
Do not heat or expose to flame.
Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Do not take apart or short circuit.
Do not attempt to recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remote Control Information
30
30
20
20
Using the remote control
Aim at the sensor, avoiding obstacles, up to a maximum range of
7 m (23 feet) directly in front of the unit.
Frequently Asked Questions .......................................... 77
If the Antenna Connector doesn’t Match .....................................81
Changing RF Output Channel......................................................81
To Reset This Unit........................................................................ 81
General Issues: Power ................................................................. 82
General Issues: Displays ............................................................. 82
General Issues: Operation ........................................................... 83
General Issues: VIERA Link......................................................... 84
General Issues: USB.................................................................... 84
Playback Issues: Picture .............................................................. 85
Playback Issues: Sound ............................................................... 86
Playback Issues: Operation.......................................................... 87
Playback Issues: VHS .................................................................. 88
Recording Issues: DVD Recording/Scheduled Recording/
Copying/External Input ........................................................... 88
Recording Issues: VHS Recording............................................... 90
Editing Issues: DVD & SD ............................................................ 90
Editing Issues: Still Pictures......................................................... 90
Glossary ................................................................................. 91
Specifications ......................................................................... 92
Product Service ...................................................................... 93
Product information...................................................................... 93
Limited Warranty (ONLY FOR U.S.A.) .................................... 94
Limited Warranty (ONLY FOR CANADA)................................ 95
Referencia rápida en español (Spanish Quick Reference)..... 96
Index..........................................................................Back cover
Troubleshooting Guide ................................................... 81
Error Messages ............................................................. 79
Setup ........................................................................................... 77
Discs ............................................................................................ 77
Recording..................................................................................... 78
USB.............................................................................................. 78
On the Unit’s Display....................................................................79
On the TV..................................................................................... 80
Connection Options for Improved Playback Quality ............... 70
DVD output and DVD/VHS output................................................ 70
Using an S Video Cable for Better Video
(S Video Cable not included) .................................................. 70
Using Component Video Cables for Better Video
(Component Video Cables not included) ................................ 71
Using an Audio Cable for Better Sound
(Audio Cable not included)...................................................... 72
Using an Optical Digital Audio Cable for Better Sound
(Optical Digital Audio Cable not included) .............................. 72
Using an HDMI (High Definition Multimedia Interface) Cable ..... 72
SD Card and USB Memory Information................................... 73
USB memories you can use with this unit....................................73
SD Cards Usable with this Unit.................................................... 73
Disc Information...................................................................... 74
Usable Discs for Recording and Playback ................................... 74
Play-only Discs ............................................................................ 75
Discs that Cannot be Played........................................................ 75
Media Care .................................................................................. 75
MP3s, DivX and Still Pictures (JPEG) .................................... 76
MP3 File Information.................................................................... 76
Still Picture (JPEG) Information ...................................................76
DivX File Information....................................................................76
Reference
Accessories
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for
replacement parts.
(Product numbers correct as of December 2007. These may be subject to change.)
Only for U.S.A.:To order accessories, refer to “Accessory Purchases” on page 94.
Only for Canada: To order accessories, call the dealer from whom you have made your purchase.
1 Remote control
(N2QAYB000197)
2 Batteries for
remote control
1 75 coaxial cable
(K2KZ2BA00001)
1 AC power supply cord
(K2CB2CB00018)
 For use with this unit only. Do
not use it with other equipment.
Also, do not use cords for other
equipment with this unit.
1 Audio/video cable
(K2KA2BA00003)
1 HDMI cable
(DMR-EZ485V only)
(K1HA19DA0007)
(U.S.A. only) Product Registration Card
Please complete and return the included product registration card, or register via the Internet at: http://www.prodreg.com/panasonic/
(Canada only)
The enclosed Canadian French label sheet corresponds to the English display on the front and back sides of the unit.
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Getting Started
Basic Operations
Advanced Features
Advanced Editing
Setting MenusOther SettingsReference
Español
DMR-EZ48VP.indb5DMR-EZ48VP.indb5 2007/12/1320:42:232007/12/1320:42:23
Downloaded From Disc-Player.com Panasonic Manuals

6
RQT9056
Control Reference Guide
  
 


Cassette eject button .....................................(15)
Disc tray open/close button............................(15)
Stop button...............................................(17, 18)
Play/1.3 button ............................................(17)
Channel select button ....................................(13)
Recording button............................................(18)
DVD/VHS POWER on/off button
(/I POWER) ................................................(12)
Press to switch the unit from on to standby mode or vice
versa. In the standby mode, the unit is still consuming a small
amount of power.
IN2 input terminals ........................................(28)
DVD/VHS drive indicator................................(17)
Lights when the DVD or VHS drive is selected.
Drive select button .........................................(17)
Drive changes each time you press [DRIVE SELECT].
Reset button...................................................(81)
DV IN terminal (for a digital video
camcorder).....................................................(29)
SD card slot....................................................(15)
USB port ........................................................(15)
One touch copying operation button
From VHS to DVD ...................................................... (20)
From DVD to VHS ...................................................... (21)
Recording indicator
TV indicator
The indicator lights during TV mode and it goes out during VCR
mode.You can switch the mode by using [VCR/TV] (16).
Main display section
Tape indicator
Progressive indicator
This indicator lights up when you select “24p” in “Progressive/
24p” (51).
Scheduled recording indicator (19)
On:
When a scheduled recording program is registered and a
recordable disc or tape is inserted.
Flashes:
The scheduled recording indicator flashes when the unit cannot
go to scheduled recording standby (e.g. there is no disc or tape,
etc). It does not flash if Quick Start is off.
Disc indicator
This indicator lights up when a disc that is supported by this unit
is inserted.
The Unit’s Display
Main Unit
S VIDEO
IN 2
VIDEO /MONO AUDIO R
L
S VIDEO
IN 2
VIDEO /MONO AUDIO R
L
OPEN/CLOSE
EJECT
POWER
REC
SD CARD
CHCH
DRIVE SELECT
RESET
 




COPYINGCOPYING
COPYINGCOPYING
REC
CHCH
Cassette
compartment
The unit’s display
Remote Control
signal sensor Disc tray
Opening
the front panel
Pull down.
DMR-EZ48VP.indb6DMR-EZ48VP.indb6 2007/12/1320:42:252007/12/1320:42:25
Downloaded From Disc-Player.com Panasonic Manuals

7
RQT9056
POWER
POWER
SLOW/SEARCH
S
C
H
E
D
U
L
E
OK
F
U
N
C
T
I
O
N
S
TV/VIDEO
PAUSESTOP
3
2
1
6
54
9
8
7
0
REC MODE
RETURN
SUB MENU
CM SKIP
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
DISPLAYAUDIO
REC
DRIVE
SELECT
F Rec
STATUS
CHAPTER
CREATE
INPUT SELECT
DELETE
FAVORITE
CH
CH
PLAY
VOL
AB
DVD/VHS
VCR/TV
TRACKING/V-LOCK
SKIP/ INDEX REW FF
TIME SLIP / JET REW
RESET
Turn the unit on or off ................................................ (12)
Select drive (DVD, VHS, SD or USB)............ (17, 33, 34)
Select channels and recording numbers etc./
Enter numbers .......................................................... (16)
Delete/Reset the tape counter
Basic operations for recording and play
Skip the specified time/
Jet rewind button ................................................ (31, 37)
Direct Navigator ........................................................ (30)
Selection/OK, Frame-by-frame ................................. (31)
Show sub menu ..................................................(32, 43)
Select audio .................................................. (25, 31, 38)
[A] for Recordings screen.......................................... (30)
Show DVD on-screen menu...................................... (50)
[B] for Album View screen ......................................... (34)
Start recording .......................................................... (18)
Change recording mode ........................................... (18)
Transmission window
TV and Set Top Box operations.................................(68)
Channel select/TRACKING/V-LOCK .................. (16, 38)
Input select (TV, IN1, IN2, DV) .................................. (28)
Sub channel access for digital broadcasts................ (16)
Favorite...................................................................... (16)
Skip 1 minute forward ............................................... (31)
Show scheduled recording list .................................. (19)
Show FUNCTIONS window ...................................... (42)
Return to previous screen
Select VCR/TV .......................................................... (16)
Create chapters......................................................... (31)
Show status messages ............................................. (39)
Start Flexible Recording............................................ (26)
Remote Control
Rear Panel
VIDEO
OPTICAL
VIDEO VIDEO
R-AUDIO-L
R-AUDIO R-AUDIO-L-L
PR
YPB
DIGITAL AUDIO OUT
(PCM / BITSTREAM)
RF
OUT
RF
IN
VHF / UHF
AC IN
S VIDEOS VIDEO
AV OUT
COMPONENT VIDEO OUT
DVD/VHS COMMON OUT
DVD PRIORITY OUTIN1


  
AC IN= Power supply
RF input terminal..........................................(8, 9)
RF output terminal .......................................(8, 9)
Cooling fan
HDMI AV OUT terminal............................(11, 72)
AUDIO/VIDEO output terminals
(DVD/VHS COMMON OUT)..........(8–11, 70–72)
AUDIO/VIDEO input terminals ...................(9, 10)
S VIDEO input terminal
AUDIO/VIDEO output terminals
(DVD PRIORITY OUT) ............................(70, 71)
S VIDEO output terminal................................(70)
DIGITAL AUDIO OUT terminal.......................(72)
COMPONENT VIDEO OUT terminals ...........(71)
Getting Started
DMR-EZ48VP.indb7DMR-EZ48VP.indb7 2007/12/1320:42:262007/12/1320:42:26
Downloaded From Disc-Player.com Panasonic Manuals

8
RQT9056
Basic Connection
Note: The terminals on the rear of your TV may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
Connecting to a Television with Direct Cable or Antenna (No Cable Box or Satellite
Receiver)
75 coaxial cable from the wall or antenna signal to the “RF IN” on the unit.
75 coaxial cable (included) from the “RF OUT” on the unit to the “VHF/UHF RF IN” on
the TV.
Audio/video cable (included) from the “DVD/VHS COMMON OUT” on the unit to the “AV
IN” on the TV.
AC power supply cord (included) from the “AC IN” on the unit to a household AC outlet.
RF
OUT
RF
IN
VHF / UHF
AC IN
OPTICAL
VIDEO
R-AUDIO-L
P
R
Y
P
B
DIGITAL AUDIO OUT
(
PC
M
/
BITSTREAM
)
S VIDEO
R-AUDIO
VIDEO
VIDEO
R-AUDIO-L
-L
S VIDEO
O
(
)
COMPONENT
VIDEO OUT
DVD/VHS COMMON OUT
DVD PRIORITY OUT
IN1
DVD/VHS COMMON OUT
VIDEO
R-AUDIO-L
VHF/UHF
RF IN
AUDIO IN VIDEO
IN
RL
2
13
4
Cable from the wall
or antenna signal Red White Yellow
Rear of TV
To a household AC outlet
(AC 120 V, 60 Hz)
step
step
step step
Rear of this unit
Red White Yellow
The connection diagrams represent typical installations. These diagrams may not work with certain in-
house cable systems, master antenna installations, or situations where TV programming is delivered using
methods that differ from industry accepted practices. If you require assistance with connections, please
contact Panasonic at 1-800-211-7262 (for U.S.A.) or 1-800-561-5505 (for Canada).
Connection (with Audio/Video cable)
Connect in numbered order to .
After this connection, set the RF output channel “OFF” (12).
Connection (without Audio/Video cable)
You do not need to connect .
After this connection, set the RF output channel “CH3” or
“CH4” (12).
DMR-EZ48VP.indb8DMR-EZ48VP.indb8 2007/12/1320:42:272007/12/1320:42:27
Downloaded From Disc-Player.com Panasonic Manuals

9
RQT9056
Connecting to a Television and a Cable Box
75 coaxial cable from the wall to the “RF IN” on the unit.
75 coaxial cable (included) from the “RF OUT” on the unit to the “RF IN” on the cable box.
75 coaxial cable from the “RF OUT” on the cable box to the “VHF/UHF RF IN” on the TV.
Audio/video cable (included) from the “DVD/VHS COMMON OUT” on the unit to the “AV IN”
on the TV.
Audio/video cable from the “AV OUT” on the cable box to the “IN1” on the unit.
AC power supply cord (included) from the “AC IN” on the unit to a household AC outlet.
Consult your cable service provider about the appropriate cable box to use.
Additional coaxial cable and audio/video (AV) cable are required.
Note: The terminals on the rear of your TV and cable box may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
VHF/UHF
RF IN
AUDIO IN VIDEO
IN
RL
RF
OUT
RF
IN
VHF / UHF
AC IN
OPTICAL
VIDEO
R-AUDIO-L
P
R
P
B
DIGITAL AUDIO OUT
(
PC
M
/
BITSTREAM
)
S VIDEO
VIDEO
VIDEO
R-AUDIO-L
R-AUDIO
-L
O
(
)
COMPONENT
VIDEO OUT
DVD/VHS COMMON OUT
DVD PRIORITY OUT
IN1
DVD/VHS COMMON OUT
VIDEO
R-AUDIO-L
VIDEO
R-AUDIO -L
S VIDEO
IN1
RF IN
AUDIO OUT VIDEO RF OUT
OUT
R L
1
2
6
3
4
5
Cable from the wall
Rear of cable box
stepstepstep
step step
Rear of TV
step
Rear of this unit
Red White Yellow
Red White Yellow
Red White Yellow
Red White Yellow
To a household AC outlet
(AC 120 V, 60 Hz)
Please check with your Cable Service Provider to verify whether the coaxial cable from the Cable Wall Jack
must be connected to your Cable Box first, before connecting to other devices.
Getting Started
DMR-EZ48VP.indb9DMR-EZ48VP.indb9 2007/12/1320:42:272007/12/1320:42:27
Downloaded From Disc-Player.com Panasonic Manuals

10
RQT9056
Connecting to a Television and a Satellite Receiver
75 coaxial cable from the satellite antenna to the “SATELLITE IN” on the satellite
receiver.
75 coaxial cable (included) from the “RF OUT” on the satellite receiver to the
“VHF/UHF RF IN” on the TV.
Audio/video cable (included) from the “DVD/VHS COMMON OUT” on the unit to the “AV
IN” on the TV.
Audio/video cable from the “AV OUT” on the satellite receiver to the “IN1” on the unit.
AC power supply cord (included) from the “AC IN” on the unit to a household AC outlet.
Consult your satellite service provider about the appropriate satellite receiver to use.
Additional coaxial cable and audio/video (AV) cable are required.
Note: The terminals on the rear of your TV and satellite receiver may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
VHF/UHF
RF IN
AUDIO IN VIDEO
IN
RL
AC IN
OPTICAL
VIDEO
R-AUDIO-L
P
R
P
B
DIGITAL AUDIO OUT
(
PC
M
/
BITSTREAM
)
S VIDEO
VIDEO
VIDEO
R-AUDIO-L
R-AUDIO
-L
O
(
)
COMPONENT
VIDEO OUT
DVD/VHS COMMON OUT
DVD PRIORITY OUT
IN1
DVD/VHS COMMON OUT
VIDEO
R-AUDIO-L
VIDEO
R-AUDIO -L
S VIDEO
IN1
AUDIO OUT VIDEO
SATELLITE
IN
RF OUT
OUTR L
RF
OUT
RF
IN
VH
F
/
UHF
2
1
5
3
4
AV OUT
Satellite
antenna
Rear of satellite receiver
Rear of TV
step
step step
stepstep
Rear of this unit
Red White Yellow
Red White Yellow
Red White Yellow
Red White Yellow
To a household AC outlet
(AC 120 V, 60 Hz)
Basic Connection
DMR-EZ48VP.indb10DMR-EZ48VP.indb10 2007/12/1320:42:282007/12/1320:42:28
Downloaded From Disc-Player.com Panasonic Manuals

11
RQT9056
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted,
enabling you to enjoy high quality digital video and audio with just one cable. When connecting to an HDMI-
compatible HDTV (High Definition Television), the output can be switched to 1080p, 1080i or 720p HD video.
Notes
If connecting to equipment that is only compatible with 2 channels output, audio with 3 channels or more will be
down-mixed (91) and output as 2 channels (some discs cannot be down-mixed).
For display units compatible with HDCP (High bandwidth Digital Content Protection) that are equipped with a
digital DVI input terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching cable
(audio cannot be output).
Usually you can watch video from HDMI input on TV. When you want to play back VHS while recording on DVD,
switch to input 1 on TV.
Connecting to a TV with an HDMI (High Definition Multimedia Interface) Cable
You can enjoy high-quality picture and audio by changing the audio/video (AV) cable connection between this unit
and your TV as shown on pages 8 to 10 and by doing the following.
Set “HDMI Priority” and “HDMI Audio Output” to “On” (65, 66). (The default setting is “On”.)
Regarding “HDAVI Control” function
When connecting with a Panasonic TV (VIERA) or a receiver equipped with “HDAVI Control” function, linked
operations are possible. [40, Linked Operations with the TV (VIERA LinkTM “HDAVI ControlTM”)]
Please use HIGH SPEED HDMI cables that have the HDMI logo (as shown on the cover).
It is recommended that you use Panasonic’s HDMI cable.
Recommended part number: RP-CDHG10 (1.0 m/3.3 ft.), RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG20
(2.0 m/6.6 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc.
Non-HDMI-compliant cables cannot be used.
HDMI IN
AC IN
VIDEO
OPTICAL
VIDEO VIDEO
R-AUDIO-L
R-AUDIO R-AUDIO-L-L
PR
YPB
DIGITAL AUDIO OUT
(PCM/ BITSTREAM)
RF
OUT
RF
IN
VHF / UHF
S VIDEOS VIDEO
AV OUT
COMPONENT VIDEO OUT
DVD/VHS COMMON OUT
DVD PRIORITY OUT
IN1
INPUT 1
AUDIO IN VIDEO
Rear of TV
Rear of this unit
Audio/video cable
(included)
Red WhiteYellow
Red WhiteYellow
HDMI cable
(Only included in
DMR-EZ485V)
Getting Started
DMR-EZ48VP.indb11DMR-EZ48VP.indb11 2007/12/1320:42:292007/12/1320:42:29
Downloaded From Disc-Player.com Panasonic Manuals

12
RQT9056
Setting the Channels and Clock
POWER
DVD/VHS
to turn the unit on.
“HELLO”appears on the unit’s display.
When this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 3 via an HDMI cable (11),
it acquires the setting information from the TV. When the
Quick Start Setting screen appears (14, Step 1)
When this unit is connected to a TV via an HDMI cable, this step is not required.
TRACKING/V-LOCK
CH
to select an RF output channel number.
 Connection (without HDMI cable or Audio/Video cable): While
viewing the unit’s front display, select “CH3” or “CH4”. If the
selection is appropriate, then the step 3 screen will appear.
Connection (with Audio/Video cable): While viewing the
unit’s front display, select “OFF”.
Select Language
Seleccione el idioma
Sélection de langue
Press OK
English
Français
Español
Language:
, to select, then
OK
When the Quick Start Setting screen
appears after this step (14, Step 1)
Select TV type and press OK.
(Please refer to Operation Instruction
for details)
Aspect Ratio Selection
4:3 TV
16:9 Widescreen TV
TV Aspect Ratio:
, to select “4:3 TV” or “16:9
Widescreen TV”, then
OK
When connecting to a 4:3 standard aspect TV:
Select “4:3 TV”.
When connecting to a 16:9 widescreen TV:
Select “16:9 Widescreen TV”.
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Quick Start Setting
Quick Start Function:
, to select “On” or “Off”,
then
OK
Does this unit get its TV signal via RF IN?
Example: Antenna, Cable TV or Cable Box connected to the
unit’s RF IN.
Yes
No
Automatic Clock and Channel Settings
Automatic Clock and
Channel Settings:
, to select “Yes” or
“No”, then
OK
When connecting the cable from the wall (cable TV or
antenna) to the unit’s RF IN:Select “Yes”.
The unit then displays the source selection screen (13).
When not connecting the cable from the wall (cable TV or
antenna) to the unit’s RF IN:Select “No”.
The unit then displays “Set Clock Manually” screen (13,
Manual Clock Setting).
Tips
“Quick Start” function (58)
If you set Quick Start to on, you
can start recording to DVD-RAM
about 1 second after you press
[DVD/VHS POWER] to turn the
unit on and then sequentially press
[REC].
The following happens when you have
selected “On”.
– Power consumption in standby mode
increases because power is supplied
to the unit.
To return to the previous screen
Press [RETURN].
Preparation:
Turn on the TV and select the appropriate video input
to suit the connections to the unit. (Example: AV
input, CH3 or CH4)
These are the first settings you make upon buying
the unit. You don’t need to make these settings again.
POWER
POWER
SLOW/SEARCH
S
C
H
E
D
U
L
E
OK
F
U
N
C
T
I
O
N
S
TV/VIDEO
PAUS E
STOP
3
2
1
6
5
4
9
8
7
0
REC MODE
RETURN
SUB MENU
CM SKIP
D
I
R
E
C
T
N
A
V
A
I
G
A
T
A
A
O
R
DISPLAY
AUDIO
REC
DRIVE
SELECT
F Rec
STATUS
CHAPTER
CREATE
INPUT SELECT
DELETE
FAVORITE
CH
CH
PLAY
VOL
A
B
DVD/VHS
VCR/TV
TRACKING/V-LOCK
SKIP
/
INDE
X
REW
FF
TIME SLIP
/
/
JET REW
RESET









DMR-EZ48VP.indb12DMR-EZ48VP.indb12 2007/12/1320:42:292007/12/1320:42:29
Downloaded From Disc-Player.com Panasonic Manuals

13
RQT9056
The types of transmission:
, to select “Antenna” or
“Cable”,
then
OK
Automatic Clock and Channel Settings
Please select the wire connected to RF IN.
Cable
Antenna
OK
Confirm the time, then
OK
– DST (Daylight Saving Time) shows the
summertime setting.
– Time Zone shows the time difference from
Greenwich Mean Time (GMT).
See “Notes”
(right)
Set Clock Automatically
Clock Setting completed successfully.
4/4/2008 11:15 AM
DST----------- On
Time Zone---- EST
OK
Tips
If the unit displays “No channels were found.”, turn off the unit
and confirm the cable or antenna input is connected to the RF IN
terminal. Restart the set up again (below).
If “Auto Clock Setting is incomplete.” is displayed, press [OK]
and set the clock manually (right).
If the clock is not correct, set the clock with “Adjust Time Zone”
(58) or “Set Clock Manually” (58).
You can delete channels you don’t need after completing Auto
Channel Setting (55).
Restarting the Auto-Setup
(after relocation, for example)
1. When the unit is on and stopped, press and hold [CH ] and
[CH ] on the main unit at the same time for about 5 seconds.
The unit turns off.
2. Press [DVD/VHS POWER] to turn the unit on.
(The signal source and channel captions revert to their default
values. All scheduled recordings are cleared.)
To cancel in the middle
Press [RETURN].
Manual Clock Setting
Perform steps 1–6 on page 12.
, to select the item you want
to change.
Set Clock Manually
/ :
/SAT AM
Month Day Year Hour Minute
1112 00 2000
DST Time Zone
Off EST
OK
, to change the setting.
– Repeat steps 7–8 to change other items.
OK
to confirm new date and
time.
– The clock starts.
Notes
The automatic clock setting can take a few minutes.
The channel and clock settings apply to both DVD and VHS drives.
Time Zone
EST (Eastern Standard Time) GMT 5
CST (Central Standard Time) GMT 6
MST (Mountain Standard Time) GMT 7
PST (Pacific Standard Time) GMT 8
AST (Alaska Standard Time) GMT 9
HST (Hawaii Standard Time) GMT 10
For other areas: xx hr
DST (Daylight Saving Time)
If you select “On”, the clock is advanced one hour beginning at
2 a.m. on the second Sunday in March and ending at 2 a.m. on the
first Sunday in November.
Set the DST period manually when it varies according to regions
(below).
To set the DST period manually
1. Press [FUNCTIONS].
2. Press [, ] to select “Other Functions” then press [OK].
3. Press [, ] to select “Setup” then press [OK].
4. Press [, ] to select “Setup” then press [].
5. Press [, ] to select “Clock Settings” then press [OK].
6. Press [, ] to select “Set the time change dates for DST” then
press [OK].
7. Press [, , ] to set the “Month”, “Day”, “Hour”, and
“Minute” then press [OK].
Setup
Setup
Audio
Display
TV Screen
VHS
Set the time change dates for DST
Channel
Disc
Video
:
SUN2nd AM
Month
Beginning
End
Day Hour Minute
3200
:
SUN1st AM
Month Day Hour Minute
11 200
OK
Restore Default
Reinitializes the
settings.
OK
to start automatic channel/
clocksetting.
Notes
Conditions of the received channel may cause automatic channel/
clock setting to take extra time.
Getting Started
DMR-EZ48VP.indb13DMR-EZ48VP.indb13 2007/12/1320:42:312007/12/1320:42:31
Downloaded From Disc-Player.com Panasonic Manuals

14
RQT9056
Acquiring the setting information from the TV (VIERA)
If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI
Control 3 via an HDMI cable, then the setting information on the TV is
acquired by this unit when the unit is turned on for the first time. Please
proceed to the following steps.
The following screen is displayed in the language set on the VIERA television.
–The language setting screen may be displayed depending on the usage
environment. Press [, ] to select language, then press [OK].
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Quick Start Setting
Quick Start Function:
, to select “On” or “Off”,
then
OK
Automatic Clock and Channel Settings
Set No Channels with this unit
Set Channels without VIERA Link
Set Channels via VIERA Link
OK
Please select how to set channels. It is possible to
download the channel information from your TV via
VIERA Link. In case you do not need channels, please
select “Set No Channels with this unit”.
Channel information acquisition :
, to select “Set Channels
via VIERA Link”, then
OK
Acquires the following information from
the TV (VIERA).
–The types of transmission
–Channel Map
–Closed caption
When the settings are complete, the time confirmation screen is
displayed.
Tips
If you do not want to acquire the
setting information from the VIERA
television
Press [, ] to select “Set Channels
without VIERA Link” or “Set No
Channels with this unit”, then press
[OK] in step 2.
–When connecting the cable from the
wall (cable TV or antenna) to the unit’s
RF IN:
Select “Set Channels without VIERA
Link”.
The unit then displays the source
selection screen (13, left column,
step 7).
–When not connecting the cable from
the wall (cable TV or antenna) to the
unit’s RF IN:
Select “Set No Channels with this
unit”.
The unit then displays “Set Clock
Manually” screen (13, Manual
Clock Setting).
 If “Automatic Clock and Channel
Settings” screen on page 12 is
displayed, the channel information could
not be acquired from the TV (VIERA).
Please go to step 6 on page 12.
To return to the previous screen
Press [RETURN].
Notes
Acquisition of the setting information
is not supported by all Panasonic TVs
(VIERA).
The acquisition may take some time
depending on the VIERA setting
information.
Confirm the time, then
OK
–For details of the time information (13, Tips, Notes)
Set Clock Automatically
Clock Setting completed successfully.
4/4/2008 11:15 AM
DST----------- On
Time Zone---- EST
OK
Setting the Channels and Clock
DMR-EZ48VP.indb14DMR-EZ48VP.indb14 2007/12/1320:42:332007/12/1320:42:33
Downloaded From Disc-Player.com Panasonic Manuals

15
RQT9056
Inserting Discs
Media Handling
Inserting a Video Cassette
Inserting USB memory
You can insert the USB memory directly into the USB port.
Preparation
Before inserting any USB memory to this unit, ensure that
the data stored in it has been backed up.
Opening
the front panel
Pull down.
REC
VHS
DVD
Inserting the USB memory
Check the orientation of the USB
connector and insert it straight in.
REC
VHS
DVD
CH
SD CARD
Removing the USB memory
Complete all USB memory-related operations and pull the
USB memory straight out.
When “uSb”(USB) is flashing on the unit’s display, do not
turn off the unit or remove the USB memory.
Inserting an SD Card
Notes
When “SD” is flashing or when copying a picture or
displaying the Album in the SD card, do not turn off the
unit or remove the SD card.
Such action may result in malfunction or loss of the
card’s contents.
Notes
When using 8 cm (3) DVD-RAM or 8 cm (3) DVD-R,
remove the disc from the cartridge.
It is not possible to record or play continuously from one
side of a double sided disc to the other. You will need to
eject the disc and turn it over.

The unit may take some time to respond to [OPEN/CLOSE]. Notes
 There are few USB memory devices that cannot be connected.
Some USB devices inserted into this unit may cause this
unit to stop operating. Such USB devices cannot be used
on this unit.

Confirm that “uSb”(USB) appears on the unit’s display when
a compatible USB memory is inserted while stopped.
If a USB memory being accessed is pulled out, then the
data may be damaged.
OPEN/CLOSE
to open the tray.
– Insert a disc.
–Press [OPEN/CLOSE] again to close the tray.
Insert label-up.
Insert a cassette.
– The unit turns on automatically.
To eject:
From the main unit:
or
From the remote control
DRIVE
SELECT
to select the VHS drive.
STOP
Press and hold for 3 or
more seconds.
EJECT
–The unit turns on automatically.
Video Cassette Information
Tab
Break off the video cassette’s tab to
prevent accidental erasure. Cover the
hole with a double layer of adhesive
tape when you want to use the video
cassette for recording again.
You can use video cassettes with the VHS and S-VHS
marks, but the unit is unable to make full use of the
characteristics of S-VHS video cassettes.
Opening
the front panel
Pull down.
REC
VHS
DVD
Inserting the card
REC
VHS
CH
SD CARD
DV IN
RESET
DRIVE SELECT
DVD
Press on the center of
the card until it clicks
into place.
Insert the card label up with
the cut-off corner on the right.
If you are using a miniSD
card/microSD card,
insert it into the miniSD
card adaptor that comes
with the card.
Insert and remove this
adaptor from the unit.
ADAPTER
Removing the card
Press on the center of the card and pull it straight out.
Getting Started
Basic Operations
DMR-EZ48VP.indb15DMR-EZ48VP.indb15 2007/12/1320:42:342007/12/1320:42:34
Downloaded From Disc-Player.com Panasonic Manuals

16
RQT9056
Watching Television
This DVD recorder has a tuner which allows it to directly receive and record
analog and terrestrial digital channels. High Definition (HD) programming is
“down-converted” and recorded in Standard Definition (SD).
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input, CH3 or CH4).
POWER
DVD/VHS
to turn the unit on.
– “HELLO”appears on the unit’s display.
TRACKING/V-LOCK
CH
to select desired channel.
You can also select channels with the numbered buttons.
To directly enter channels for analog and digital broadcasts:
Antenna Mode: Cable TV Mode:
e.g., “3”: [0] [3] [OK]
“13”: [1] [3] [OK]
e.g., “5”: [0] [0] [5] [OK]
“15”: [0] [1] [5] [OK]
To enter the sub channel number for a digital broadcast:
Antenna Mode: Cable TV Mode:
e.g., “3-1”: [3] [−] [1] [OK]
“13-1”: [1] [3] [1] [OK]
e.g., “1-1”: [1] [−] [1] [OK]
“15-1”: [1] [5] [−] [1] [OK]
The hyphen appears automatically on “Antenna Mode” if you enter two numbers.
Notes
This unit can receive most Basic
Cable television channels. It cannot
receive Premium Services that require
additional fees or a separate decoder.
This unit can receive music channels
from digital broadcasters, but you
cannot record them. Data broadcasts
are not for viewing or recording.
Multi-channel surround broadcast is
output in stereo (on 2 channels).
If you connected this unit and a TV without an audio/video cable or an
HDMI Cable
VCR/TV
to watch video from this unit.
– The TV indicator on this unit’s display does not
light up.
– By pressing [VCR/TV] again, the TV indicator on
this unit’s display will light up, and you can watch
TV directly without passing the signal through this
unit (TV mode).
POWER
POWER
SLOW/SEARCH
S
C
H
E
D
U
L
E
OK
F
U
N
C
T
I
O
N
S
TV/VIDEO
PAUS E
STOP
3
2
1
6
54
9
8
7
0
REC MODE
RETURN
SUB MENU
CM SKIP
D
I
R
E
C
T
N
A
V
A
I
G
A
T
A
A
O
R
DISPLAY
AUDIO
REC
DRIVE
SELECT
F Rec
STATUS
CHAPTER
CREATE
INPUT SELECT
DELETE
FAVORITE
CH
CH
PLAY
VOL
A
B
DVD/VHS
VCR/TV
TRACKING/V-LOCK
SKIP
/
INDE
X
REW
FF
TIME SLIP
/
JET REW
RESET




Notes
It is possible to select a channel from the Favorite list for instant or scheduled
recording. (18, 19)
If you set “Surf Mode” to “Favorite” (56), then only the Favorite channels can be
selected using [CH , ].
You can register channels in the Favorite list from Channel Setting list. (55, Setting
favorite channels)
To set Favorite Channels
You can define a Favorite list containing your favorite channels only. (Up to 30 channels)
1. After selecting the desired channel to set
Press [SUB MENU].
2. Press [, ] to select “Set Favorite”, then press [OK].
3. Press [, ] to select the position on the list, then press [OK].
−Press [, ] to change between pages.
−You can also select a list number (1-9 and 0) with the numbered buttons.
To delete the favorite channels registered
Press [, ] to select the channel on the list, then press [OK].
To select a channel from the Favorite list
1. Press [FAVORITE].
2. Press [, ] to select a channel, then press [OK].
−Press [, ] to change between pages.
−You can also select a channel with the numbered buttons.
Tips
To zoom in on video
1. Press [SUB MENU].
2. Press [,] to select “Zoom In”,
then press [OK].
DMR-EZ48VP.indb16DMR-EZ48VP.indb16 2007/12/1320:42:372007/12/1320:42:37
Downloaded From Disc-Player.com Panasonic Manuals

17
RQT9056
Playback
Notes
[DVD]
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[+RW] [-RW‹VR›]
Playback starts from the most recent
recording.
[DVD-V] [CD]
Playback starts from the beginning of
the disc.
DivX
DivX Menu screen appears (36).
The unit takes some time to read the
disc before play starts.
Discs continue to rotate while menus
are displayed. Press [STOP] when
you finish to preserve the unit’s motor
and your television screen.
[VHS]
Tapes are automatically rewound once
they reach the end (except during
scheduled recording, fast forwarding,
etc.).
Viewing pause or using slow playback
in VP mode may result in a distorted
image.
You may have to adjust the tracking
for tapes recorded on other VCRs
(38). In some cases, the picture
quality may still be inferior; this is due
to format constraints.



POWE
R
POWER
S
L
O
W
/S
EAR
C
H
T
V
/
VIDE
O
T
PAUS E
PAUS E
PAUS E
STOP
STOP
STOP
3
2
1
6
5
4
9
8
7
0
CM SKIP
CM SKIP
DRIVE
SELECT
I
NPUT
S
ELE
CT
D
ELET
E
F
AV
O
RITE
CH
C
H
PLAY
VOL
DVD/VHS
TRA
C
KIN
G/
V-L
OCK
S
KI
P
/
INDE
X
REW
EW
W
FF
FF
FF
TIME SLIP
/
JET REW
R
E
S
E
T
Playing a Video Cassette
Refer to “Advanced Video Cassette Playback” (37–38) for detailed
information on playback of video cassette.
[VHS]
Insert a cassette.
– Play starts automatically if you insert a cassette with the
accidental erasure tab removed.
Stopping Play
Press [STOP].
Pausing Play
Press [PAUSE].
– Press again to restart play.
POWER
DVD/VHS
to turn the unit on.
–“HELLO”appears on the unit’s display.
DRIVE
SELECT
to select the VHS drive.
– The VHS indicator lights up on the unit.
PLAY
Refer to “Advanced Disc Playback” (30–31) for detailed information on
playback of discs.
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›] [CD]
POWER
DVD/VHS
to turn the unit on.
–“HELLO”appears on the unit’s display.
DRIVE
SELECT
to select the DVD drive.
– The DVD indicator lights up on the unit.
Playing a Disc
OPEN/CLOSE
to open the tray (Button located on front of the unit).
–Insert a disc.
PLAY
–The tray closes and play begins.
Stopping Play
Press [STOP].
– The stopped position is memorized.
(Resume play function)
– The stopped position is cleared
when you press [STOP]
two or more times, or press
[OPEN/CLOSE].
Pausing Play
Press [PAUSE].
– Press again to restart play.
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input, CH3 or CH4).
Tips
Icons such as “ [RAM] ” indicate usable
discs. Refer to pages 74 and 75.
Basic Operations
DMR-EZ48VP.indb17DMR-EZ48VP.indb17 2007/12/1320:42:382007/12/1320:42:38
Downloaded From Disc-Player.com Panasonic Manuals

18
RQT9056
POWER
DVD/VHS
to turn the unit on.
–“HELLO”appears on the unit’s display.
DRIVE
SELECT
to select the drive (DVD or VHS).
Insert a disc or VHS cassette.
– Insert a disc or VHS cassette with enough remaining blank space
(15).
TRACKING/V-LOCK
CH
to select desired channel.
Antenna Mode: Cable TV Mode:
e.g. channel 4-2 e.g. channel 102-45
– To select with the numbered buttons (16).
– When no channel setting is performed on the unit and broadcast
is recorded directly from the cable box or satellite receiver,
select a channel on the connected equipment and press
[INPUT SELECT] to select “IN1” or “IN2”.
REC MODE
to select the recording mode.
– Recording mode should be determined by program length and
available time on selected media (24)
Recording mode Remaining time
REC
to start recording.
Recording Television Programs
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input, CH3 or CH4).
[RAM] If the disc is protected, release protection (52).
[VHS] Ensure accidental erasure tab is intact.
Pausing Recording
Press [PAUSE].
–Press again to restart recording.
Stopping Recording
Press [STOP].
Refer to “Important Notes for Recording” (23) and “Advanced Recording”
(24–26) for detailed information on recording.
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]
Digital broadcasts cannot be recorded to video tape.
POWER
POWER
SLOW/SEARCH
S
C
H
E
D
U
L
E
OK
F
U
N
C
T
I
O
N
S
TV/VIDEO
PAUS E
STOP
3
2
1
6
5
4
9
8
7
0
REC MODE
RETURN
SUB MENU
CM SKIP
D
I
R
E
C
T
N
A
V
A
I
G
A
T
A
A
O
R
DISPLAY
AUDIO
REC
DRIVE
SELECT
F Rec
STATUS
CHAPTER
CREATE
INPUT SELECT
DELETE
FAVORITE
CH
CH
PLAY
VOL
A
B





DVD/VHS
TRACKING/V-LOCK
SKIP
/
INDE
X
REW
FF
TIME SLIP
/
JET REW
RESET
Tips
Icons such as “ [RAM] ” indicate usable
discs. Refer to pages 74 and 75.
Notes
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
It takes about 30 seconds for the unit
to complete recording management
information after recording finishes.
You cannot change the channel or
recording mode during recording.
Simultaneous recording to both DVD
and VHS is not possible.
DMR-EZ48VP.indb18DMR-EZ48VP.indb18 2007/12/1320:42:402007/12/1320:42:40
Downloaded From Disc-Player.com Panasonic Manuals

19
RQT9056
, to move through the items and , to
set the items.
Channel/Input – TV Station/External Input
To select a favorite channel
(To set Favorite Channels, see page 16)
1. Press [SUB MENU].
2. Press [, ] to select “Change Surf Mode”, then press
[OK].
3. Press [, ] to select “Favorite”, then press [OK].
Date/Frequency – You can set a daily or weekly program.
On (start time) / Off (end time)
– Hold button to change in 30-minute increments.
Drive – DVD or VHS
Mode – Recording mode, see page 24
Name (only for discs)
– Press [OK], see
page 42.
Channel, Caption
Preview of selected
channel
Mode OffOn
4-1 KPO-SD
Channel/
Input
Date/
Frequency
Name
Set Channel/Input.
::
Drive
SCHEDULED
RECORDING DVD
VHS 5/ 4 Fri 6:11 PM
Remaining Recording Time 0:33 XP
2:00 SP
4-1
OK
Cancel Number
SUB MENU
Surf Mode : All
To delete all items
1. Press [SUB MENU].
2. Press [, ] to select “Delete”, then press [OK].
Scheduled Recording
OK
− Repeat steps 2−4 to program other recordings.
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input, CH3 or CH4).
[RAM] If the disc is protected, release protection (52).
[VHS] Ensure accidental erasure tab is intact (15).
Insert a disc or VHS cassette with enough remaining blank space.
Confirm that the clock on the unit’s display is set to the correct time.
If connected via a cable box or satellite receiver, set channel on that
equipment before scheduled recording starts.
, to select “New Scheduled Recording”,
then
OK
POWER
DVD/VHS
when you have finished programming.
−“” lights on the unit’s display.
−Scheduled recording can be started only when the
unit is turned off.
POWER
POWER
SLOW/SEARCH
S
C
H
E
D
U
L
E
ENTER
F
U
N
C
T
I
O
N
S
TV/VIDEO
PAUS E
STOP
3
2
1
6
5
4
9
8
7
0
RETURN
SUB MENU
CM SKIP
D
I
R
E
C
T
N
A
V
A
I
G
A
T
A
A
O
R
DISPLAY
AUDIO
DRIVE
SELECT
CHAPTER
CREATE
INPUT SELECT
DELETE
FAVORITE
CH
CH
PLAY
VOL
DVD/VHS
VCR/TV
TRACKING/V-LOCK
SKIP
/
INDE
X
REW
FF
TIME SLIP
/
/
JET REW
RESET
OK





ChannelNo Date On CheckOff Drive Mode
Schedule List DVD
VHS 5/ 4 Fri 6:11 PM
Remaining Recording Time 0:33 XP
2:00 SP
OK
New Scheduled Recording
Press OK to set new schedule.
Refer to “Advanced Scheduled Recording” (27) for detailed information on
scheduled recording.
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]
Digital broadcasts cannot be recorded to video tape.
Notes
To prevent recording errors:
Set a scheduled recording period slightly
longer than the actual program (to make
sure the program is recorded in full).
Be sure to perform step 5 before the
scheduled recording time. When the
unit is turned off, “” lights on the
unit’s display to indicate scheduled
recording standby has been activated.
“” flashes when the unit cannot go to
scheduled recording standby. (e.g., a
recordable disc is not in the disc tray)
It does not flash if Quick Start is off.
When scheduled recordings are set
to start one immediately after another,
the unit cannot record the beginning
of the later program.
 If two scheduled recording times overlap,
the recording that started first always has
priority. The second recording will start
only after the first recording has finished.
Scheduled recording cannot be
executed on both DVD and VHS
drives at the same time.
When starting time for a scheduled
recording is the same, the recording
that you programmed later has priority.
Depending on the Daylight Savings
Time (DST) settings for this unit,
scheduled recordings may be
affected when the seasons change.
Tips
Icons such as “ [RAM] ” indicate usable
discs. Refer to pages 74 and 75.
Basic Operations
DMR-EZ48VP.indb19DMR-EZ48VP.indb19 2007/12/1320:42:412007/12/1320:42:41
Downloaded From Disc-Player.com Panasonic Manuals

20
RQT9056
When copying begins, the VHS tape is played back starting at the tape’s
current position, and recorded to the disc.
[VHS] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Copying Recordings (VHS DVD)
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input, CH3 or CH4).
[RAM] If the disc is protected, release protection (52).
Insert a disc with enough space for recording.
Set the DVD recording mode (determined by program length and
available time on selected media 24).
Insert the VHS tape containing the program to be copied. Stop the tape
at the point where you want to start copying from.
Tips
Additional navigation
You can begin the same kind of copy by using COPY Navigator. Use the operations
listed below instead of step 1 shown above.
1. Press [FUNCTIONS].
2. Press [, ] to select “Copy” then press [OK].
COPY Navigator screen appears.
3. Press [, ] to select “VHS to DVD” then press [OK].
Segmenting a recording to be copied
When copying from VHS to DVD, recordings on the DVD are divided according to index
signals detected on the tape.
− Recordings that are too short may not be divided correctly.
− The time it takes to record may become longer than the original recording depending
on the number of index signals.
To cancel copying in the middle
Press [STOP].
− You can also press and hold [RETURN] for about 3 or more seconds to cancel copying
in the middle.
However, you cannot stop finalizing after it has started.
When copying multilingual broadcast program
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Before starting copy, try playing the VHS and pressing [AUDIO], and then select audio
track that you want to copy. Audio can also be switched during copy.
Copying Recordings
PLAY
to copy without finalizing.
−If you press [STOP], you can cancel copying.
On the main unit
While both DVD and VHS are stopped
COPYING
COPYING
Press and hold for about
3 seconds.
REC
to copy and automatically finalize
when done
(see page 54 for more information on finalizing).
− If you press [STOP], you can cancel copying.
− or −
Notes
If copying doesn’t complete due to
shortage of remaining time, disc
space, or other reasons, finalizing
won’t start.
When copying doesn’t start, the
“COPYING” indicator on the main unit
blinks for about 7 seconds. Check if
the unit is properly prepared.
If a part of a tape recorded in VP
mode is copied to disc, noise may
appear at the beginning of the copied
part.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
SLOW/SEARCH
S
C
H
E
D
U
L
E
OK
F
U
N
C
T
I
O
N
S
PAUS E
STOP
9
8
7
0
REC MODE
RETURN
SUB MENU
CM SKIP
CM SKIP
D
I
R
E
C
T
N
A
V
A
I
G
A
T
A
A
O
R
DISPLAY
AUDIO
REC
F Rec
STATUS
CHAPTER
CREATE
DELETE
FAVORITE
PLAY
A
B
VCR/TV
SKIP
/
INDE
X
REW
EW
W
W
FF
FF
FF
TIME SLIP
/
JET REW
RESET
2
2
COPYINGCOPYING
REC
CHCH
COPYING indicator
− COPY will appear in the unit’s display when the copying process begins.
− Copying is automatically stopped when the tape reaches its end or the disc
becomes full.
Tips
Icons such as “ [RAM] ” indicate
usable discs. Refer to pages 74
and 75.
DMR-EZ48VP.indb20DMR-EZ48VP.indb20 2007/12/1320:42:432007/12/1320:42:43
Downloaded From Disc-Player.com Panasonic Manuals