Panasonic EBL512 User manual

Panasonic Electric Works Fire & Security Technology Europe AB
Citadellsvägen 23, SE-211 18 Malmö, Sweden
Tel: [phone] • Fax: [phone]
[e-mail] • www.panasonic-fire-security.com
Fire alarm systems
Frame for flush
mounted EBL512,
1568
•Same colour as the c.i.e. housing
•Prepared for simple mounting
General
The frame 1568 is used when a c.i.e.
EBL512 shall be flush mounted.
The frame is made of metal and has the
same grey colour as the EBL512 housing.
The frame width is 30 mm on all four sides.
In order to make it possible to open the door,
the housing has to be placed approx. 60 mm
out from the wall. Behind the housing there
might be need of space for some mounting
device. See figure to the right.
The frame is prepared with mounting holes
(Ø=6 mm), two holes on each side and one
hole at the top and at the bottom. It is also
prepared for access to the EBL512 housing's
knock-outs for cable entries. See figure on
the opposite page.

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.
Product Leaflet Date of issue Revision / Date of revision
MEW00440 2003-09-09 1 / 2005-12-06
Type number
1568 Frame for flush mounted EBL512.
Technical data
Size H x W x D (mm) 672 x 462 x 30 See also the figure above.
Weight (g) 1365
Construction / Colour Metal / Light grey (NCS S1500-N, PMS Cool Grey 2)