Panasonic SA-PT860E User manual

Main unit SA-PT860E/EB/EG
O
OO
OGENERAL
Power supply: AC 230-240 V, 50 Hz
Power consumption: This unit 135 W
Power consumption in standby mode:
approx. 0.4 W
Dimensions (W×H×D): 430 mm×63 mm×327 mm
Mass: This unit 3.4 kg
Operating temperature range: 0°Cto+40°C
Operating humidity range: 35 % to 80 % RH
(no condensation)
O
OO
OAMPLIFIER SECTION
RMS Output Power: Dolby Digital Mode
Front Ch:
125 W per channel (3 Ω), 1 kHz, 10% THD
Surround Ch:
125 W per channel (3 Ω), 1 kHz, 10% THD
Center Ch:
250 W per channel (6 Ω), 1 kHz, 10% THD
© 2008 Matsushita Electric Industrial Co. Ltd.. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
SA-PT860E
SA-PT860EB
SA-PT860EG
Colour
(K).......................Black Type
Subwoofer Ch:
250 W per channel (6 Ω), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power:
1000 W
DIN Output Power: Dolby Digital Mode
Front Ch:
75 W per channel (3 Ω), 1 kHz, 1% THD
Surround Ch:
75 W per channel (3 Ω), 1 kHz, 1% THD
Center Ch:
145 W per channel (6 Ω), 1 kHz, 1% THD
Subwoofer Ch:
145 W per channel (6 Ω), 100 Hz, 1 % THD
Total DIN Dolby Digital mode power:
590 W
O
OO
OFM TUNER, TERMINALS SECTION
Preset Memory: FM 30 stations
Frequency Modulation (FM)
DVD Home Theater Sound System
Notes: This model’s CD/DVD mechanism is DLS6. Please refer to the original service manual (Order No.
MD0801003CE) for this mechanism.
Specifications
ORDER NO. MD0801011CE

Frequency range:
87.50-108.00 MHz (50-kHz step)
Antenna terminals: 75 Ω(unbalanced)
Digital audio input
Optical digital input: Optical terminal
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Phone jack
Terminal: Stereo, 3.5 mm jack
USB Port
USB standard: USB 2.0 full speed
Media file format support: MP3 (*.mp3)
WMA (*.wma)
JPEG (*.jpg) (*.jpeg)
MPEG4 (*.asf) (For E/EG only)
USB device file system: FAT12, FAT16, FAT32
USB Port power: Max. 500 mA
O
OO
ODISC SECTION (EB area)
Discs played [8 cm or 12 cm]:
(1) DVD (DVD-Video)
(2) DVD-RAM (DVD-VR, MP3*2, 5, JPEG*4, 5 )
(3) DVD-R (DVD-Video, DVD-VR, MP3*2, 5, JPEG*4, 5 )
(4) DVD-R DL (DVD-Video, DVD-VR)
(5) DVD-RW (DVD-Video, DVD-VR, MP3*2, 5, JPEG*4, 5)
(6) +R/+RW (Video)
(7) +R DL (Video)
(8) CD, CD-R/RW [CD-DA, Video CD, SVCD*1,MP3
*2, 5,WMA *3,
5, JPEG*4, 5]
*1 Conforming to IEC62107
*2 MPEG-1 Layer 3, MPEG-2 Layer 3
*3 Windows Media Audio Ver.9.0 L3
ONot compatible with Multiple Bit Rate (MBR)
*4 Exif Ver 2.1 JPEG Baseline files
OPicture resolution: between 160 x 120 and 6144 x 4096
pixels (Sub sampling is 4:0:0, 4:2:0, 4:2:2 or 4:4:4).
Extremely long and narrow pictures may not be displayed.
*5 The total combined maximum number of recognizable audio
and picture contents and groups: 4000 audio and picture
contents and 400 groups.
O
OO
ODISC SECTION (E/EG areas)
Discs played [8 cm or 12 cm]:
(1) DVD (DVD-Video, DivX*5, 6)
(2) DVD-RAM (DVD-VR, MP3*2, 5, JPEG*4, 5, MPEG4*5, 7, DivX*5, 6
)
(3) DVD-R (DVD-Video, DVD-VR, MP3*2, 5, JPEG*4, 5 , MPEG4*5,
7, DivX*5, 6)
(4) DVD-R DL (DVD-Video, DVD-VR)
(5) DVD-RW (DVD-Video, DVD-VR, MP3*2, 5, JPEG*4, 5,
MPEG4*5, 7, DivX*5, 6)
(6) +R/+RW (Video)
(7) +R DL (Video)
(8) CD, CD-R/RW [CD-DA, Video CD, SVCD*1,MP3
*2, 5,WMA *3,
5, JPEG*4, 5, MPEG4*5, 7, DivX*5, 6]
*1 Conforming to IEC62107
*2 MPEG-1 Layer 3, MPEG-2 Layer 3
*3 Windows Media Audio Ver.9.0 L3
ONot compatible with Multiple Bit Rate (MBR)
*4 Exif Ver 2.1 JPEG Baseline files
OPicture resolution: between 160 x 120 and 6144 x 4096
pixels (Sub sampling is 4:0:0, 4:2:0, 4:2:2 or 4:4:4).
Extremely long and narrow pictures may not be displayed.
*5 The total combined maximum number of recognizable audio,
picture and video contents and groups: 4000 audio, picture
and video contents and 400 groups.
*6 Plays all versions of DivX® video (including DivX®6) with
standard playback of DivX® media files. Certified to the DivX
Home Theater Profile.
*7 MPEG4 data recorded with the Panasonic SD multi cameras
or DVD video recorders.
OConforming to SD VIDEO specifications (ASF standard)/
MPEG4 (Simple Profile) video system/G.726 audio system.
Pick up
Wavelength (DVD/CD): 655/785 nm
Laser power (DVD/CD): CLASS 1/CLASS 1M
Audio output (Disc)
Number of channels: 5.1ch(FL,FR,C,SL,SR,
SW)
O
OO
OVIDEO SECTION
Video system: PAL625/50, PAL525/60, NTSC
Composite video output
Output level: 1Vp-p(75Ω)
Terminal: Scart jack (1 system)
S-video output
Y output level: 1Vp-p(75Ω)
C output level: PAL; 0.3 Vp-p (75 Ω)
NTSC; 0.286 Vp-p (75 Ω)
Terminal: Scart jack (1 system)
Component Video Output
O
OO
OY output level: 1Vp-p(75Ω)
O
OO
OPBoutput level: 0.7Vp-p(75Ω)
O
OO
OPRoutput level: 0.7Vp-p(75Ω)
O
OO
OTerminal: Pin jack (Y: green, PB:blue,
PR:red)(1system)
RGB video output
R output level: 0.7Vp-p(75Ω)
G output level: 0.7Vp-p(75Ω)
B output level: 0.7Vp-p(75Ω)
Terminal: Scart jack (1 system)
HDMI AV output
Terminal: 19pin type A connector
HDAVI Control:
This unit supports “HDAVI Control 3” function.
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).
Mechanism:
This model uses DLS6 mechanism.
Wireless Features:
This model supports wireless surround (example SH-FX67).
2
SA-PT860E / SA-PT860EB / SA-PT860EG

Refer to their respective original service manuals for *1.
3
SA-PT860E / SA-PT860EB / SA-PT860EG

1 Safety Precautions 6
1.1. GENERAL GUIDELINES 6
1.2. Before Repair and Adjustment 6
1.3. Protection Circuitry 6
1.4. Safety Parts Information 7
1.5. Caution for AC Cord (For EB only) 8
2 Prevention of Electrostatic Discharge (ESD) to
Electrostatically Sensitive (ES) Devices 9
3 Precaution of Laser Diode 10
4 About Lead Free Solder (PbF) 11
4.1. Service caution based on legal restrictions 11
5 Handling Precautions for Traverse Unit 12
5.1. Cautions to Be Taken in Handling the Optical Pickup Unit
12
5.2. Grounding for electrostatic breakdown prevention 12
6 Accessories 14
7 Operation Procedures 15
7.1. Remote Control Key Buttons Operations 15
7.2. Main Unit Key Buttons Operations 16
7.3. Using the VIERA Link “HDAVI Control™” 17
7.4. Using the iPod 19
7.5. USB Connection and Operation 21
7.6. Audio and Video Connection 22
7.7. Disc Information 24
8 Self-Diagnosis and Special Mode Setting 26
8.1. Service Mode Summary Table 26
8.2. Service Mode Table 26
8.3. Wireless Service Mode Summary Table 33
8.4. Service Mode Table (Wireless - eg. SH-FX67) 34
8.5. DVD Self Diagnostic Function-Error Code 36
8.6. Sales Demonstration Lock Function 38
8.7. Service Precautions 39
9 Assembling and Disassembling 41
9.1. Disassembly Flow Chart 43
9.2. Main Components and P.C.B. Locations 44
9.3. Disassembly of Top Cabinet 45
9.4. Disassembly of Rear Panel 45
9.5. Disassembly of Scart P.C.B. 45
9.6. Disassembly of DVD Mechanism Unit 46
9.7. Disassembly of Front Panel 46
9.8. Disassembly of Panel P.C.B. 47
9.9. Disassembly of Power Button P.C.B. 47
9.10. Disassembly of USB/Setup Mic P.C.B. 47
9.11. Disassembly of DVD Lid 48
9.12. Disassembly of Ipod Cradle P.C.B. 48
9.13. Disassembly of AC Inlet P.C.B. 49
9.14. Disassembly of Main P.C.B. 50
9.15. Disassembly of D-Amp P.C.B. 51
9.16. Replacement of Digital Amp IC (IC5000) 51
9.17. Replacement of Digital Amp IC (IC5200) 53
9.18. Replacement of Digital Amp IC (IC5300) 54
9.19. Replacement of Digital Amp IC (IC5400) 56
9.20. Disassembly of SMPS P.C.B. 57
9.21. Replacement of Switch Regulator IC (IC5701) 57
9.22. Replacement of Switch Regulator Diode (D5702) 58
9.23. Replacement of Regulator Diode (D5801) 60
9.24. Replacement of Regulator Diode (D5802) 60
9.25. Replacement of Regulator Diode (D5803) 61
9.26. Disassembly of Power Supply P.C.B. 62
9.27. Replacement of Regulator IC (IC2903) 63
9.28. Disassembly of DVD Module P.C.B. 64
9.29. Disassembly of Coprocessor P.C.B. 65
9.30. Disassembly of Wireless Adapter P.C.B. 65
10 Assembling and Disassembling of DVD Mechanism Unit 66
10.1. Disassembly of traverse unit 66
10.2. Assembly of traverse unit 68
11 Service Fixture and Tools 70
12 Service Position 71
12.1. Checking & Repairing Main P.C.B. 71
12.2. Checking & Repairing D-Amp P.C.B. 71
12.3. Checking & Repairing SMPS P.C.B. 73
12.4. Checking & Repairing Power Supply P.C.B. 73
12.5. Checking & Repairing DVD Module P.C.B. 74
13 Measurements and Adjustments 77
13.1. Service Tools and Equipment 77
13.2. Important points in adjustment 77
13.3. Storing and handling of test discs 77
13.4. Optical adjustment 78
14 Voltage and Waveform Chart 79
14.1. DVD Module P.C.B. 79
14.2. D-Amp P.C.B. 81
14.3. Main P.C.B. 82
14.4. Panel P.C.B. 83
14.5. Power Supply P.C.B. 83
14.6. USB/Setup Mic AC Inlet P.C.B. 84
14.7. Scart P.C.B. 84
CONTENTS
Page Page
4
SA-PT860E / SA-PT860EB / SA-PT860EG

14.8. SMPS P.C.B. 84
14.9. Waveform Chart 85
15 Illustration of IC’s, Transistors and Diodes 88
16 Wiring Connection Diagram 89
17 Block Diagram 91
17.1. System Control 91
17.2. DVD (Servo) 92
17.3. DVD (Audio) 93
17.4. DVD (HDMI) 94
17.5. VIDEO 95
17.6. Audio 96
17.7. Digital Audio Amp 97
17.8. Power 98
18 Schematic Diagram Notes 99
19 Schematic Diagram 101
19.1. DVD Module Circuit 101
19.2. Main Circuit 106
19.3. Panel, Power Button Circuit 110
19.4. USB/Setup Mic Circuit 111
19.5. D-Amp Circuit 112
19.6. Power Supply Circuit 114
19.7. SMPS Circuit 116
19.8. AC Inlet, Ipod Cradle 118
19.9. Coprocessor, Wireless Adapter Circuit 119
19.10. Scart Circuit 120
20 Printed Circuit Board 121
20.1. DVD Module P.C.B. 121
20.2. Main P.C.B. 122
20.3. Panel, Power Button, USB/Setup Mic, Power Supply & AC
Inlet P.C.B. 123
20.4. D-Amp P.C.B. 124
20.5. SMPS P.C.B. 125
20.6. Ipod Cradle, Scart, Coprocessor & Wireless Adapter
P.C.B. 126
21 Basic Troubleshooting Guide 127
21.1. Troubleshooting Guide for F61 and/or F76 127
21.2. Basic Troubleshooting Guide for Traverse Unit (DVD
Module P.C.B.) 134
21.3. Basic Troubleshooting Guide for HDMI AV Output 135
22 Overall Simplified Block for PT860 137
22.1. SMPS Module & Power Supply Block 138
23 Terminal Function of ICs 139
23.1. IC2001 (RFKWPT460E): IC System Control 139
23.2. IC1701 (MFI341S2095): IC Ipod Video 139
23.3. IC6901(C0HBB0000057): IC FL Driver 140
24 Exploded Views 141
24.1. Cabinet Parts Location 141
24.2. Packaging 142
25 Replacement Parts List 143
25.1. Component Parts List 144
26 Schematic Diagram for printing with letter size 160
5
SA-PT860E / SA-PT860EB / SA-PT860EG

1 Safety Precautions
1.1. GENERAL GUIDELINES
1.When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or
damaged by the short circuit.
2.After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly
installed.
3.After servicing, carry out the following leakage current checks to prevent the customer from being exposed to shock hazards.
1.1.1. LEAKAGE CURRENT COLD CHECK
1.Unplug the AC cord and connect a jumper between the two prongs on the plug.
2.Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on
the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the
chassis, the reading should be between 1MΩand 5.2MΩ.
When the exposed metal does not have a return path to the chassis, the reading must be
1.1.2. LEAKAGE CURRENT HOT CHECK
1.Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check.
2.Connect a 1.5kΩ, 10 watts resistor, in parallel with a 0.15µF capacitors, between each exposed metallic part on the set and a
good earth ground such as a water pipe, as shown in Figure 1.
3.Use an AC voltmeter, with 1000 ohms/volt or more sensitivity, to measure the potential across the resistor.
4.Check each exposed metallic part, and measure the voltage at each point.
5.Reverse the AC plug in the AC outlet and repeat each of the above measurements.
6.The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equivalent) may
be used to make the hot checks, leakage current must not exceed 1/2 milliamp. In case a measurement is outside of the limits
specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to
the customer.
Figure 1
1.2. Before Repair and Adjustment
Disconnect AC power to discharge unit AC Capacitors as such C5700, C5701, C5703, C5704, C5705, C5706, C5707 through a
10 Ω, 10 W resistor to ground.
Caution:
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
Current consumption at AC 230 V~240 V, 50 Hz in NO SIGNAL mode volume minimal should be ~ 600 mA. (EB)
Current consumption at AC 230 V, 50 Hz in NO SIGNAL mode volume minimal should be ~ 600 mA. (E/EG)
1.3. Protection Circuitry
The protection circuitry may have operated if either of the following conditions are noticed:
• • •
• No sound is heard when the power is turned on.
• • •
• Sound stops during a performance.
6
SA-PT860E / SA-PT860EB / SA-PT860EG

The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are
“shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
1.Turn off the power.
2.Determine the cause of the problem and correct it.
3.Turn on the power once again after one minute.
Note:
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
1.4. Safety Parts Information
Safety Parts List:
There are special components used in this equipment which are important for safety.
These parts are marked by in the Schematic Diagrams & Replacement Parts List. It is essential that these critical parts
should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design
without permission of manufacturer.
Table 1
Ref. No. Part No. Part Name & Description Remarks
23 RGRX0067B-C REAR PANEL [M] E/EG
23 RGRX0067B-D REAR PANEL [M] EB
66 RKMX0141-K TOP CABINET [M]
PCB3 REPX0622B SMPS / AC INLET P.C.B [M] (RTL)
DZ5701 ERZV10V511CS ZENER [M]
L5701 ELF15N035AN LINE FILTER [M]
L5702 G0B932H00001 LINE FILTER [M]
L5703 ELF22V020A LINE FILTER [M]
T2900 G4D1A0000117 SWITCHING TRANSFORMER [M]
T5701 ETS42BN1A6AD SWITCHING TRANSFORMER [M]
T5751 ETS19AB256AG SWITCHING TRANSFORMER [M]
PC5701 B3PBA0000402 PHOTO COUPLER [M]
PC5702 B3PBA0000402 PHOTO COUPLER [M]
PC5720 B3PBA0000402 PHOTO COUPLER [M]
PC5799 B3PBA0000402 PHOTO COUPLER [M]
F1 K5D502BNA005 FUSE [M]
FP2901 K5G401A00008 FUSE PROTECTOR [M]
TH5701 D4CAC8R00002 THERMISTOR [M]
TH5860 D4CC11040013 THERMISTOR [M]
P5701 K2AA2B000017 AC INLET [M]
A2 K2CQ2CA00007 AC CORD [M] E/EG
A2 K2CT3CA00004 AC CORD [M] EB
C5700 F1BAF1020020 1000pF [M]
C5701 F0CAF334A087 0.33uF [M]
C5704 F1BAF1020020 1000pF [M]
C5705 F1BAF1020020 1000pF [M]
C5706 F1BAF1020020 1000pF [M]
C5707 F1BAF1020020 1000pF [M]
7
SA-PT860E / SA-PT860EB / SA-PT860EG

1.5. Caution for AC Cord (For EB only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that
the replacement fuse has a rating of 5-ampere and that it
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until
a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local dealer.
If a new plug is to be fitted please observe the wiring
code as stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance
with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E, BY THE EARTH SYMBOL OR
COLOURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
Figure A Figure B
Fuse cover
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
A A
8
SA-PT860E / SA-PT860EB / SA-PT860EG

2 Prevention of Electrostatic Discharge (ESD) to
Electrostatically Sensitive (ES) Devices
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called
Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and
semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage
caused by electrostatic discharge (ESD).
1.Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your
body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,
which should be removed for potential shock reasons prior to applying power to the unit under test.
2.After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as
aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
3.Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4.Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static (ESD protected)" can
generate electrical charge sufficient to damage ES devices.
5.Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.
6.Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable
conductive material).
7.Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be installed.
Caution:
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8.Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the
brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD)
sufficient to damage an ES device).
9
SA-PT860E / SA-PT860EB / SA-PT860EG

3 Precaution of Laser Diode
CAUTION :
This product utilizes a laser diode with the unit turned "on", invisible laser radiation is emitted from the pickup lens.
Wavelength: 655 nm (DVD)/785 nm (CD)
Maximum output radiation power from pickup: 100 µW/VDE
Laser radiation from the pickup unit is safety level, but be sure the followings:
1.Do not disassemble the pickup unit, since radiation from exposed laser diode is dangerous.
2.Do not adjust the variable resistor on the pickup unit. It was already adjusted.
3.Do not look at the focus lens using optical instruments.
4.Recommend not to look at pickup lens for a long time.
ACHTUNG :
Dieses Produkt enthält eine Laserdiode. Im eingeschalteten Zustand wird unsichtbare Laserstrahlung von der
Lasereinheitadgestrahit.
Wellenlänge: 655 nm (DVD)/785 nm (CD)
Maximale Strahlungsleistung der Lasereinhelt: 100 µW/VDE
Die strahlungan der Lasereinheit ist ungefährlich, wenn folgende Punkte beachtet werden:
1.Die Lasereinheit nicht zerlegen, da die Strahlung an der freigelegten Laserdiode gefährlich ist.
2.Den werksseitig justierten Einstellregler der Lasereinheit nicht verstellen.
3.Nicht mit optischen Instrumenten in die Fokussierlinse blicken.
4.Nicht über längere Zeit in die Fokussierlinse blicken.
10
SA-PT860E / SA-PT860EB / SA-PT860EG

4 About Lead Free Solder (PbF)
4.1. Service caution based on legal restrictions
4.1.1. General description about Lead Free Solder (PbF)
The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this
equipment in considering the globally environmental conservation.
The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86°F) more than that
of the normal solder.
Definition of PCB Lead Free Solder being used
The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder.
(See right figure)
Service caution for repair work using Lead Free Solder (PbF)
• • •
• The lead free solder has to be used when repairing the equipment for which the lead free solder is used.
(Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)
• • •
• To put lead free solder, it should be well molten and mixed with the original lead free solder.
• • •
• Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.
• • •
• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt
the lead free solder.
• • •
• Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30
degrees C (662±86°F).
Recommended Lead Free Solder (Service Parts Route.)
• • •
• The following 3 types of lead free solder are available through the service parts route.
RFKZ03D01K-----------(0.3mm 100g Reel)
RFKZ06D01K-----------(0.6mm 100g Reel)
RFKZ10D01K-----------(1.0mm 100g Reel)
Note
* Ingredient: tin (Sn), 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%
11
SA-PT860E / SA-PT860EB / SA-PT860EG

5 Handling Precautions for Traverse Unit
The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be
taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit.
5.1. Cautions to Be Taken in Handling the Optical Pickup Unit
The laser diode in the optical pickup unit may be damaged due to electrostatic discharge generating from clothes or human body.
Special care must be taken avoid caution to electrostatic discharge damage when servicing the laser diode.
1.Do not give a considerable shock to the optical pickup unit as it has an extremely high-precise structure.
2.To prevent the laser diode from the electrostatic discharge damage, the flexible cable of the optical pickup unit removed should
be short-circuited with a short pin or a clip.
3.The flexible cable may be cut off if an excessive force is applied to it. Use caution when handling the flexible cable.
4.The antistatic FPC is connected to the new optical pickup unit. After replacing the optical pickup unit and connecting the flexible
cable, cut off the antistatic FPC.
5.2. Grounding for electrostatic breakdown prevention
Some devices such as the DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static
electricity in the working environment. Proceed servicing works under the working environment where grounding works is
completed.
5.2.1. Worktable grounding
1.Put a conductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet.
5.2.2. Human body grounding
1.Use the anti-static wrist strap to discharge the static electricity form your body.
12
SA-PT860E / SA-PT860EB / SA-PT860EG

13
SA-PT860E / SA-PT860EB / SA-PT860EG

Remote control
AC cord
(E/EG only)
AC cord
(EB only)
Antenna plug
adaptor
FM indoor antenna
6 Accessories
• • •
• Note: Refer to “Replacement Parts List” (Section 25) for the part number.
14
SA-PT860E / SA-PT860EB / SA-PT860EG

7 Operation Procedures
7.1. Remote Control Key Buttons Operations
Turn this unit on/off
1
Select channels and title numbers etc. / Enter
numbers
2
Cancel
3
Select preset radio stations
4
Basic operations for play
5
Show a disc top menu or program list
6
Select or confirm menu items / Frame-by-frame
7
Show a disc menu or play list
8
Show on-screen menu / Display RDS text data
9
Show setup menu / Auto speaker setup
11
Turn Dolby Pro Logic II on/off
10
TV op eratio ns
Aim the remote control at the Panasonic TV and
press the button.
[TV/AV]: Change the TV s video input mode
This may not work properly with some models.
[]
: Turn the TV on/off
[, ]:
Adjust the TV volume
+-
13
Select sound effect to set / Turn Whisper-mode
Surround on/off
12
Select disc as the source 14
Select USB or iPod as the source 15
X
16 Select FM tuner or external audio as the source
FM AV AU D-IN
Start up and play a disc automatically 17
Adjust the volume of this unit 18
Show START menu 20
Return to previous screen
21
Select radio stations manually 19
Adjust the subwoofer level or select speaker channel 25
22
Set the Sleep timer
Press and hold [-SLEEP].
While the time is shown on this unit display, press
the [-SLEEP] repeatedly.
or
Switch information on this unit s display
SLEEP 30 SLEEP 60 SLEEP 90 SLEEP120
OFF (Cancel)
To confirm the remaining time, press and hold the
button again.
Select the play mode / Set the rep
eat mo
de 23
24 Mute the sound
"MUTING" flashes in this unit s display while the
function is on.
To cancel, press the button again or adjust the
volume.
Muting is cancelled when you switch the unit to
standby.
15
SA-PT860E / SA-PT860EB / SA-PT860EG

7.2. Main Unit Key Buttons Operations
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
Standby/on switch [ ]
1
This indicator lights when the unit is connected to the
AC mains supply.
2
Turn Subwoofer Boost on/off4
Open/Close the disc tray3
Skip or slow-search play / Select the radio stations6
Stop playing / Select the tuning mode / Adjust the
FM reception condition
7
Play discs / Memorize the receiving radio stations8
Connect USB device9
Connect iPod
10
Connect Auto speaker setup microphone
11
Remote control signal sensor
12
Adjust the volume of this unit
14
Display
13
5Select the source
DVD/CD USB FM AV AUX D-IN IPOD
15
Connect headphones (not included)
Reduce the volume before connecting.
Audio is automatically switched to 2-channel
stereo.
To prevent hearing damage, avoid listening for
prolonged periods of time.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Headphone plug type: 3.5 mm stereo mini plug
12
SW
BOOST
OPENCLOSE
9
10
11
14
13 15
16
SA-PT860E / SA-PT860EB / SA-PT860EG

7.3. Using the VIERA Link “HDAVI Control™”
VIERA Link HD AVI Control
VIERA Link HDAVI Control is a convenient function that
offers linked operations of this unit, and a Panasonic TV
(VIERA) under HDAVI Control . You can use this
function by connecting the equipment with the HDMI
cable. See the operating instructions for connected
equipment for operational details.
VIERA Link HDAVI Control , based on the control
functions provided by HDMI which is an industry
standard known as HDMI CEC (Consumer Electronics
Control), is a unique function that we have developed
and added. As such, its operation with other
manufacturers equipment that supports HDMI CEC
cannot be guaranteed (Refer to the operating
instructions for your equipment).
This unit supports HDAVI Control 3 function.
HDAVI Control 3 is the newest standard (current as of
December, 2007) for Panasonic s HDAVI Control
compatible equipment. This standard is compatible with
Panasonic s conventional HDAVI equipment.
The TV with HDAVI Control 2 (or later) function enables
the following operation: VIERA Link Control only with
TV s remote control [for HDAVI Control 2 (or later) ]
(29).
Preparation
Confirm that the HDMI connection has been made ( 10).
Set VIERA Link to ON ( 26, HDMI menu).
To complete and activate the connection correctly, turn
on all VIERA Link HDAVI Control compatible
equipment and set the TV to the corresponding HDMI
input mode for this unit.
Select between
AUX and D-IN to work with the linked
operations.
Confirm the audio connection to the
AUX terminal (for
AUX ) or OPTICAL IN terminal (for D-IN ) ( 11).
1 Press [FM/EXT-IN] to select
AUX or D-IN .
2 Press [SETUP] to select TV AUDIO , then press
[ ] or [ ] to switch to
AUX or D-IN .
Whenever the connection or settings are changed,
reconfirm the points above.
Automatic setup
The settings for TV ASPECT
*1
( 24, VIDEO
menu) and LANGUAGE
*2
( 25, DISPLAY menu)
will automatically follow to the settings of the TV.
(This may not work if the corresponding setting you
have made for your TV is not available on this unit.)
*1
When using VIERA Link HDAVI Control with
HDAVI Control 3 compatible TV
*2
When using VIERA Link HDAVI Control with
HDAVI Control 2 (or later) compatible TV
You can turn on this unit and the TV, and start playing the
disc with a single press of a button.
This function also works if you press [ PLAY] on this
unit s remote control when this unit is in standby mode.
Playback may not be immediately displayed on the TV. If
you miss the beginning portion of playback, press [ ]
or [ ] to go back to where playback started.
When you switch the TV input to TV tuner mode, this
unit will automatically switch to
AUX
*
or D-IN
*
. (This
does not work when this unit is in IPOD mode.)
When you select DVD/CD as the source, the TV will
automatically switch its input mode for this unit.
DVD-V VCD When playback stops, the TV will
automatically return to TV tuner mode.
When you select
AUX
*
or DIGITAL IN
*
from Input
Selection in START menu ( 15), the TV will
automatically switch to TV tuner mode.
When the TV is turned off, this unit goes into standby
mode automatically.
Setting the TV audio for VIERALink HD AVI Control This function works only when DVD/CD ,
USB ,
AUX
*
or D-IN
*
is selected as the source on this unit.
When the TV is turned on, this unit does not turn on
automatically. (Power on link is not available.)
When you press [ ], only this unit turns off. Other
connected equipment compatible with VIERA Link
HDAVI Control stays on.
*
AUX or D-IN ( DIGITAL IN ) works depending on
the TV AUDIO setting ( above, Setting the TV
audio for VIERA Link HDAVI Control ).
- SLEEP - REPEAT
MUTING
- FL DISPLAY - PLAY MODE
SUBWOOFER
- CH SELECT
FUNCTIONS
SETUP SOUND LEVEL
TOP MENU
MENU
DIRECT
NAVIGATOR
START
PLAY
LIST
RETURN
SLOW/SEARCH
PLAYPAUSESTOP
SKIP
123
456
789
0
10
CANCEL
VOL
FM/EXT-IN
- W.S.
PL
OK
ONE TOUCH PLAY
SETUP
PLAY
SKIP SLOW/SEARCH
ONET OUCH PLAY
FM/EXT-IN
One touch play
Start disc playback.
This unit s speakers will be
automatically activated ( 29).
Auto i nput switching
Power off link
ONE TOUCH PLAY
Note
Note
17
SA-PT860E / SA-PT860EB / SA-PT860EG

You can select whether audio is output from this unit s
speakers or the TV speakers by using the TV menu
settings. For details, refer to the operating instructions of
your TV.
Home Cinema
This unit s speakers are active.
When this unit is in standby mode, changing the TV
speakers to this unit s speakers in the TV menu will
automatically turn this unit on and select AUX
*
or
D-IN
*
as the source.
The TV speakers are automatically muted.
You can control the volume setting using the volume or
mute button on the TV s remote control. (The volume
level is displayed on this unit s FL display.)
To cancel muting, you can also use this unit s remote
control ( 14).
If you turn off this unit, TV speakers will be
automatically activated.
TV
TV speakers are active.
The volume of this unit is set to 0 .
This function works only when DVD/CD , USB ,
AUX
*
or D-IN
*
is selected as the source on this unit.
Audio output is 2-channel audio.
When switching between this unit s speakers and TV
speakers, the TV screen may be blank for several
seconds.
You can control the playback menus of this unit with the
TV s remote control. When operating the TV s remote
control, refer to the below illustration for operation
buttons.
1Select this unit s operation menu by using the TV
menu settings.
(For details, refer to the operating instructions of your
TV.)
The START menu will be shown.
e.g. DVD-V
The START menu can also be shown by using a
button on the TV s remote control (e.g. [OPTION]).
When
DVD/CD or USB is selected as the source,
this works only during stop mode.
This does not work while iPod music playback
screen is displayed on the TV.
2 Select the desired item on the START menu ( 15).
When the on-screen control panel appears
e.g. DVD-V (when Playback Disc is selected from the
START menu)
You can operate the playback with the indicated controls.
The on-screen control panel can also be shown by
using a button on the TV s remote control (e.g.
[OPTION]).
This works only during
DVD/CD or USB playback
and resume modes or, while iPod music playback
screen is displayed on the TV.
If the TV has automatically switched to the HDMI input
mode for this unit (
28, Auto input switching )
When you press [EXIT] button on the TV s remote control
to exit VIERA Link Control, the TV will automatically
switch to TV tuner mode. (This does not work when this
unit is in IPOD mode or, during playback or resume
mode when
DVD/CD or USB is selected as the
source.)
Depending on the menu, some button operations
cannot be performed from the TV s remote control.
You cannot input numbers with the numbered buttons
on the TV s remote control ([0] to [9]). Use this unit s
remote control to select the play list etc.
Speaker control VIERA Link Control only with TV remote
control [for HD AVI Control 2 (or later) ]
DVD/CD Home Cinema
OK
RETURN
Input Selection
Sound
Playback Disc
TOP MENU (DVD)
MENU (DVD)
Playback/
menu access
SEARCH
RETURN
SEARCH
PLAY
PAUSE
STOP
Note
18
SA-PT860E / SA-PT860EB / SA-PT860EG

7.4. Using the iPod
To view photos/videos from the iPod
Ensure the video connection to the SCART (AV)
terminal on this unit and select "VIDEO" from "VIDEO
OUT SCART" in "VIDEO" menu
Operate the iPod menu to make the appropriate photo/
video output settings for your TV. (Refer to operating
instructions of your iPod.)
To display the picture, turn on the TV and select the
appropriate video input mode.
Before connecting/disconnecting the iPod, turn this unit
off or reduce the volume of this unit to its minimum.
Connect the iPod (not included) firmly.
Recharging starts when the iPod is inserted.
To operate through display of iPod, press [FUNCTIONS].
Play starts from the selected song.
1
To select shuffle modes
Each time you press the button:
2
To select repeat modes
Press and hold and then press the button
repeatedly within 3 seconds.
Each time you press the button:
Select "IPOD".
The iPod automatically switches to
this unit’s display mode.
Music menu appears on the TV.
iPod/USB
iPod Home Cinema
OK
Playlists
Ar tists
Alb ums
Songs
Podcasts
Genres
Composer s
Audiobooks
e.g.
Enjo ying m usic
Select an item.
Press [ ] to skip page by page.
To return to the previous screen,
press [RETURN].
OK
RETURN
iPod Home Cinema
Good mornin g
Ronaldo
Happy days
3/ 20
2:43 -1:15
e.g.
Song
Artist
Album
Playback condition
Shuffle mode
1
Repeat mode
Current position
: Song shuffle
: Album shuffle
Off: Cancel
: Repeat 1 track
: Repeat all
Off: Cancel
Preparation
2
Press
REPEAT
[]
PLAY MODE
[]
Hold the dock when connecting/disconnecting the iPod.
Attach the dock adapter which should be supplied with
your iPod to the dock for the stable use of the iPod.
If you need an adapter, consult your iPod dealer.
This unit
iPod
Dock for iPod
e.g.
Dock adapter
(not included)
19
SA-PT860E / SA-PT860EB / SA-PT860EG

You can also use the remote control to operate iPod
menu.
[]: To navigate menu items
[OK]: To go to the next menu
[RETURN]: To return to the previous menu
You can enjoy surround sound effect when you press
[ ] to turn on Dolby Pro Logic II
When using the START menu in "IPOD" mode
Select "Music" or "Photos/Videos".
Music: Shows the music menu.
Photos/Videos: Switches to display of iPod.
About recharging the battery
iPod will start recharging regardless of whether this unit
is on or off.
"IPOD " will be shown on this unit’s display during
iPod charging in this unit standby mode.
Check iPod to see if the battery is fully recharged.
If you are not using iPod for an extended period of time
after recharging has completed, disconnect it from this
unit, as the battery will be depleted naturally. (Once fully
recharged, additional recharging will not occur.)
When connecting the iPod, ensure the USB device has
been disconnected.
Compatible iPod
iPod touch (8GB, 16GB)
iPod nano 3rd generation (video) (4GB, 8GB)
iPod classic (80GB, 160GB)
iPod nano 2nd generation (aluminum) (2GB, 4GB, 8GB)
iPod 5th generation (video) (60GB, 80GB)
iPod 5th generation (video) (30GB)
iPod nano 1st generation (1GB, 2GB, 4GB)
iPod 4th generation (color display) (40GB, 60GB)
iPod 4th generation (color display) (20GB, 30GB)
iPod 4th generation (40GB)
iPod 4th generation (20GB)
iPod mini (4GB, 6GB)
Compatibility depends on the software version of your
iPod.
Enjoying photos/videos
1
Switch the iPod to its own display
mode.
Proceed operations through display
of iPod.
2
Play a slideshow or video on your iPod.
The picture will be displayed on your TV.
Basic controls (For music and videos only)
Button Function
[ PLAY] Play
[STOP], PAUSE] Pause
[] Skip
(press and hold)
[]
Search
FUNCTIONS
Note
20
SA-PT860E / SA-PT860EB / SA-PT860EG