Panasonic SB-MAF6000PU User manual

© Panasonic Corporation 2015. All rights reserved.
Unauthorized copying and distribution is a violation of
law.
PSG1504008CE
Speaker System
Model No. SB-MAF6000PU
SB-MAF6000GS
SB-MAG6000PU
SB-MAG6000GS
SB-MAW6000PU
SB-MAW6000GS
SB-MAX6000PU
SB-MAX6000GS
Product Color : (K)... Black Type
TABLE OF CONTENTS PAGE PAGE
1 Specifications ----------------------------------------------------- 2
2 Disassembly and Assembly Instructions ---------------- 2
2.1. Type of screws --------------------------------------------- 3
2.2. Speakers (SB-MAF6000PU/GS, SB-
MAG6000PU/GS) ----------------------------------------- 3
2.3. Subwoofer Speaker (SA-MAW6000PU/GS)-------- 5
3 Wiring Connection Diagram ---------------------------------- 9
3.1. Speakers (SB-MAF6000PU/GS, SB-
MAG6000PU/GS) ----------------------------------------- 9
3.2. Subwoofer Speaker (SA-MAW6000PU/GS)-------- 9
4 Exploded View and Replacement Parts List -----------11
4.1. Cabinet Parts Location (SB-MAF6000PU/GS,
SB-MAG6000PU/GS) -----------------------------------11
4.2. Cabinet Parts Location (SA-MAW6000PU/
GS) ----------------------------------------------------------12
4.3. Packaging (SB-MAX6000PU/GS) -------------------13
4.4. Replacement Parts List--------------------------------- 15

2
1 Specifications
2 Disassembly and Assembly Instructions
Caution Note:
• This section describes procedures for checking the operation and replacing the main components.
• For reassembly after operation checks or replacement, reverse the respective procedures.
• Special reassembly procedures are described only when required.
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with sharp
edges.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the service man-
ual.
• Select items from the following indexes when disassembly or replacement are required.
Speakers (SB-MAF6000PU/GS, SB-MAG6000PU/GS)
• Disassembly of Front Panel Block
• Disassembly of Tweeter Speaker (SP1)
• Disassembly of Woofer Speaker (SP2)
• Disassembly of Lighting Wire P.C.B. Assembly
Subwoofer Speaker (SA-MAW6000PU/GS)
• Disassembly of Front Panel Block
• Disassembly of Subwoofer Speaker (SP3)
• Disassembly of Lighting Wire P.C.B. Assembly
Speakers (SB-MAF6000PU/GS, SB-MAG6000PU/GS)
Speaker unit(s)
Tweeter 6 cm cone type
Woofer 20 cm cone type
Impedance 3 Ω
Dimensions (W x H x D) 407 mm x 260 mm x 258 mm
Mass 5.5 kg
Subwoofer Speaker (SA-MAW6000PU/GS)
Speaker unit(s)
Super Woofer 30 cm Cone type
Impedance 6 Ω
Dimensions (W x H x D) 402 mm x 450 mm x 386 mm
Mass 13 kg
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.

3
2.1. Type of screws
2.1.1. Speakers (SB-MAF6000PU/GS, SB-MAG6000PU/GS)
2.1.2. Subwoofer Speaker (SA-MAW6000PU/GS)
2.2. Speakers (SB-MAF6000PU/GS, SB-MAG6000PU/GS)
2.2.1. Disassembly of Front Panel Block
Step 1 : Remove 4 screws.
Step 2 : Insert flathead screwdriver into the grooves.
Step 3 : Insert a steel rule between the Front Panel Block and
Speaker Cabinet.
Step 4 : Apply light force to push the Front Panel Block.
Caution : Do not exert strong force as it may damage the
Front Panel Block
Step 5 : Detach Front Panel Block.

4
Step 6 : Detach speaker wire.
Step 7 : Lift up the Himelon.
Step 8 : Detach 4P Socket.
Step 9 : Remove Front Panel Block.
During assembling, please do following
Step 1 : Remove and clean up the bosses and holes.
Step 2 : Align the bosses of Front Panel Block to the holes of
Speaker Cabinet.
Step 3 : Press the Front Panel Block tightly.
2.2.2. Disassembly of Tweeter Speaker
(SP1)
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 4 screws.
Step 2 : Remove Tweeter Speaker (SP1).
2.2.3. Disassembly of Woofer Speaker
(SP2)
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 4 screws.

5
Step 2 : Slightly lift up Woofer Speaker (SP2).
Step 3 : Detach speaker wire.
Step 4 : Remove Woofer Speaker (SP2).
2.2.4. Disassembly of Lighting Wire
P.C.B. Assembly
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 4 screws.
Step 2 : Release wire from the slots.
Step 3 : Remove Lighting Wire P.C.B. Assembly Unit.
Step 4 : Remove 4 screws.
Step 5 : Remove Lighting Wire P.C.B. Assembly.
2.3. Subwoofer Speaker
(SA-MAW6000PU/GS)
2.3.1. Disassembly of Front Panel Block
Step 1 : Remove 4 screws.

6
Step 2 : Insert flathead screwdriver into the grooves.
Step 3 : Insert a steel rule between the Front Panel Block and
Speaker Cabinet.
Step 4 : Apply light force to push the Front Panel Block.
Caution : Do not exert strong force as it may damage the
Front Panel Block.
Step 5 : Detach Front Panel Block.
Step 6 : Lift up the Himelon.
Step 7 : Detach 4P Socket.
Step 8 : Remove Front Panel Block.
During assembling, please do following
Step 1 : Remove and clean up the bosses and holes.
Step 2 : Align the bosses of Front Panel Block to the holes of
Speaker Cabinet.
Step 3 : Press the Front Panel Block tightly.

7
2.3.2. Disassembly of Subwoofer Speaker
(SP3)
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 8 screws.
Step 2 : Slightly lift up Subwoofer Speaker (SP3).
Step 3 : Detach speaker wire.
Step 4 : Remove Subwoofer Speaker (SP3).
2.3.3. Disassembly of Lighting Wire
P.C.B. Assembly
• Refer to “Disassembly of Front Panel Block”
Step 1 : Release the 4P wire from Front Panel Block.
Step 2 : Remove 4 screws.
Step 3 : Remove Lighting Cover.

8
Step 4 : Release 4P wire from the slots.
Step 5 : Remove 2 screws.
Step 6 : Remove Lighting Wire P.C.B. Assembly.

9
3 Wiring Connection Diagram
3.1. Speakers (SB-MAF6000PU/GS, SB-MAG6000PU/GS)
3.2. Subwoofer Speaker (SA-MAW6000PU/GS)

10