Panasonic SAPM313 - CD MICRO SYSTEM User manual

ORDERNO. MD0502031C5
A6
Speaker System
SB-PM31E
Colour
(M)... Wood GrainType
(K)... Black Type
SPECIFICATIONS
Specification
Type 2way, 2speaker system
Speaker(s)
Woofer 10 cm conetype
Tweeter 6 cm conetype
Impedance 6
Input power (IEC)
HIGH 80 W(Max)
LOW 80 W(Max)
Output sound pressure level 81 dB/W(1.0m)
Frequencyrange 55 Hz - 22 kHz (-16 dB)
75 Hz - 20 kHz (-10 dB)
Dimensions(WxH xD) 145 x254 x217 mm
Mass 2.00 kg
Notes :
1. Specificationsare subject tochangewithout notice.
2. Mass and dimensionsare approximate.
3. Thelabels“HIGH” and “LOW” on therear of thespeakers
refer toHigh frequencyand Lowfrequency.
System : SC-PM31E-S MusicCenter : SA-PM31E-S
1
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Front Speaker : SB-PM31E-M
System : SC-PM31EB-S MusicCenter : SA-PM31EB-S
Front Speaker : SB-PM31E-M
System : SC-PM31EG-S MusicCenter : SA-PM31EG-S
Front Speaker : SB-PM31E-M
System : SC-PM313P-S MusicCenter : SA-PM313P-S
Front Speaker : SB-PM31E-K
2005 Matsushita ElectricIndustrial Co. Ltd.. All rights reserved.
Unauthorized copying and distribution isaviolation of law.
1. Connection of the Speaker Cables
-Besure to connect speaker cables before connecting the AC
power supplycord.
-The load impedance of anyspeaker used with thisunitmust be 6 .
-Besure to connect the cablefrom the right speaker to the right
terminal and the cablefrom the left speaker to the left terminal.
1. Stripoff the outer covering, and twist the center conductor. Make
sure the bare ends of the wires are not unravelled. (Iftheyare,
twist them tight again.)
2. Insert the wire to the rear panel of the unitand close the lever.
Notes :
-To prevent damage to circuitry, never short-circuitpositive (+)and
negative (-) speaker wires.
-Besure to connect onlypositive (red/white) wires to positive (+)
terminalsand negative (black/blue) wires to negative (-) terminals.
Placement of speakers
Speakerare designedidenticallysothat no left orright channel orientation is necessary.
-These speakers do not have magneticshielding. Donot place them
near televisions, personal computers or other devices easily
influenced bymagnetism.
-To avoiddamage to the speakers, do not touch the speaker cones
ifyou have taken the nets off.
2
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Notes :
-Keep your speakers at least 10 mm awayfrom the system for
proper ventilation.
Connection
Use onlythe suppliedspeakers.
The combination of the mainunit and speakers provide the best sound.
Using otherspeakers candamage the unit and sound qualitywill be negativelyaffected.
Notes on speakeruse
-You can damage your speakers and shorten theiruseful life ifyou
playsound at high levelsover extended periods.
-Reduce the volume inthe following cases to avoiddamage.
-When playing distorted sound.
-When adjusting the sound quality.
2. Connection of the Speaker Wiring
3
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

3. Cabinet Parts Location
4. Replacement Parts List
Notes :
-Important safetynotice :
When replacing anyof these components, be sure to use only
manufacturer’sspecified parts showninthe parts list.
-[M] markings inthe Remarks columns indicates parts supplied by
PAVCSG.
4
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

Ref. No. PartNo. PartName& Description Remarks
CABINETAND CHASSIS
1RFKHBPM31E-M SPEAKER CAB. ASS’Y [M]M
1RFKHBPM31E-K SPEAKER CAB. ASS’Y [M]K
2RGPV0076-S FRONTPANEL [M]
3RGKV0133 STAND BASE [M]
4RGP1311-S CAPORNAMENT [M]
5RHD40023 NETCATCH SCREW [M]
6RKA0072-KJ LEG CUSHION [M]
7RYBV0029 NETFRAMEASS’Y [M]
7-1 RMG0520-K NETHOLDER [M]
8RMQ0621 EVAPACKING (TW) [M]
9RMQ1093 EVAPACKING (WOOFER) [M]
10 RGNV0088-K SPEC LABEL [M]
11 XTB2+8GFJ SCREW [M]
12 XTB4+16AFJ SCREW [M]
CAPACITOR
C1 ECA1HAY4R7S 4.7uf50V [M]
PACKING MATERIALS
P1 RPNV0087 POLYFOAM [M]
P2 RPF0420 MIRAMATBAG [M]
SPEAKERS
SP1 EAS6PH124B TWEETER [M]
SP2 EAST10P45A6 WOOFER [M]
5. Packaging
5
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com

FLE0502W/S
6
PDFcreated withpdfFactoryProtrialversion www.pdffactory.com