Panasonic AJ-PCS060G - DVCPRO - Data Storage Wallet User manual

Portable Hard Disk Unit
ポータブルハードディスクユニット
Operating Instructions
取扱説明書
Before operating this product, please read the instructions carefully and save this manual for future use.
このたびは、パナソニック製品をお買い上げいただき、まことにありがとうございます。
●取扱説明書をよくお読みのうえ、正しく安全にお使いください。
●ご使用前に「安全上のご注意」（J-2〜J-4ページ）を必ずお読みください。
●
保証書は「お買い上げ日・販売店名」などの記入を確かめ、取扱説明書とともに大切に保管してください。
Model No. AJ-PCS060G
S0705KA088 -M
Printed in Japan VQT0T80-7
日
本
語
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
Fur Erlauterungen in Deutsch, konsultieren Sie bitte die mitgelieferte CD-ROM.
Pour des explications en français, veuillez vous reporter au CD-ROM fourni.
Per le istruzioni in italiano, vedere il CD-ROM in dotazione.
Para la explicación en español, consulte el CD-ROM suministrado.

E-1
IMPORTANT
“Unauthorized recording of copyrighted television
programmes, video tapes and other materials may
infringe the rights of copyright holders and
contravene copyright laws.”
CAUTION:
Danger of explosion or fire if battery is
mistreated.
• Replace only with same or specified type.
• Do not disassemble or dispose of in fire.
• Do not store in temperatures over 60 °C.
• Use specified charger for rechargeable
batteries.
• Do not recharge the battery if it is not a
rechargeable type.
• Do not leave the battery in an automobile
exposed to direct sunlight for a long period
of time with doors and windows closed.
For memory back up battery
• Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type.
• Refer replacement back-up battery to
qualified service personnel.
indicates safety information.
WARNING:
• TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
• TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, KEEP THIS EQUIPMENT AWAY
FROM ALL LIQUIDS. USE AND STORE ONLY
IN LOCATIONS WHICH ARE NOT EXPOSED
TO THE RISK OF DRIPPING OR SPLASHING
LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.
CAUTION:
In order to maintain adequate ventilation, do not
install or place this unit in a bookcase, built-in
cabinet or any other confined space. To prevent
risk of electric shock or fire hazard due to
overheating, ensure that curtains and any other
materials do not obstruct the ventilation.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE,
USE THE RECOMMENDED ACCESSORIES
ONLY.
For U.S.A. and Canada
Operating precaution
Operation near any appliance which generates strong
magnetic fields may give rise to noise in the video and
audio signals. If this should be the case, deal with the
situation by, for instance, moving the source of the
magnetic fields away from the unit before operation.
A rechargeable battery that is recyclable powers the product you have purchased.
For U.S.A. - California Only
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material–special
handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Read this first!

Read this first! (continued)
For U.S.A. and Canada
FCC NOTICE (USA)
E-2
ENGLISH
Declaration of Conformity
Model Number: AJ-PCS060G
Trade Name: PANASONIC
Responsible Party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support contact: Panasonic Broadcast & Television Systems Company
1-800-524-1448
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any unauthorized
modifications.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The user may find the booklet “Something About Interference” available from FCC local regional offices helpful.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached installation instructions and the user must use
only shielded interface cables when connecting to host computer or peripheral devices. Also any unauthorized
changes or modifications to this equipment could void the user's authority to operate this device.

E-3
Read this first! (continued)
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
For U.S.A. and Canada

E-4
ENGLISH
For Europe
Operating precaution
Operation near any appliance which generates strong
magnetic fields may give rise to noise in the video and
audio signals. If this should be the case, deal with the
situation by, for instance, moving the source of the
magnetic fields away from the unit before operation.
CAUTION:
Danger of explosion or fire if battery is mistreated.
• Replace only with same or specified type.
• Do not disassemble or dispose of in fire.
• Do not store in temperatures over 60 °C.
• Use specified charger for rechargeable batteries.
• Do not recharge the battery if it is not a
rechargeable type.
• Do not leave the battery in an automobile
exposed to direct sunlight for a long period of time
with doors and windows closed.
For memory back up battery
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Refer replacement back-up battery to qualified
service personnel.
WARNING:
• TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
• TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, KEEP THIS EQUIPMENT AWAY
FROM ALL LIQUIDS. USE AND STORE ONLY
IN LOCATIONS WHICH ARE NOT EXPOSED
TO THE RISK OF DRIPPING OR SPLASHING
LIQUIDS, AND DO NOT PLACE ANY LIQUID
CONTAINERS ON TOP OF THE EQUIPMENT.
CAUTION:
In order to maintain adequate ventilation, do not
install or place this unit in a bookcase, built-in
cabinet or any other confined space. To prevent
risk of electric shock or fire hazard due to
overheating, ensure that curtains and any other
materials do not obstruct the ventilation.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE,
USE THE RECOMMENDED ACCESSORIES
ONLY.
IMPORTANT
“Unauthorized recording of copyrighted television
programmes, video tapes and other materials may
infringe the rights of copyright holders and
contravene copyright laws.”
indicates safety information.
DO NOT REMOVE PANEL COVERS BY UNSCREWING THEM.
To reduce the risk of electric shock, do not remove the covers. No user serviceable parts inside.
Refer servicing to qualified service personnel.
Read this first! (continued)

E-5
Read this first! (continued)
Information for Users on Collection and Disposal of Old Equipment
and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and
prevent any potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to discard these items, please
contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Cd
TO REMOVE THE BATTERY
Back-up Battery (Lithium Battery)
• For the removal of the battery for disposal at the end of its service life, please consult your dealer.

E-6
ENGLISH
Contents
Read this first! ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-1
IMPORTANT SAFETY INSTRUCTIONS ‥E-3
Overview‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-7
Features ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-7
Included accessories ‥‥‥‥‥‥‥‥‥‥E-7
Options ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-7
For better performance‥‥‥‥‥‥‥‥‥‥E-8
AJ-PCS060G ‥‥‥‥‥‥‥‥‥‥‥ E-8
Hard disk‥‥‥‥‥‥‥‥‥‥‥‥‥ E-8
Cleaning ‥‥‥‥‥‥‥‥‥‥‥‥‥ E-9
Maintenance ‥‥‥‥‥‥‥‥‥‥‥ E-9
AC adapter ‥‥‥‥‥‥‥‥‥‥‥‥ E-9
Battery pack ‥‥‥‥‥‥‥‥‥‥‥ E-9
Getting Started
Control reference guide ‥‥‥‥‥‥‥‥E-10
Front ‥‥‥‥‥‥‥‥‥‥‥‥‥‥ E-10
Top‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ E-11
Right side ‥‥‥‥‥‥‥‥‥‥‥‥ E-11
Left side ‥‥‥‥‥‥‥‥‥‥‥‥ E-12
Back ‥‥‥‥‥‥‥‥‥‥‥‥‥‥ E-12
Copying ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-13
Turning the unit ON and OFF ‥‥‥ E-13
Inserting P2 cards ‥‥‥‥‥‥‥‥ E-13
Ejecting P2 cards ‥‥‥‥‥‥‥‥ E-13
Write-protection on P2 cards‥‥‥‥ E-14
HDD capacity indicator ‥‥‥‥‥‥ E-14
Battery level indicator ‥‥‥‥‥‥‥ E-15
Copying from P2 cards to the HDD ‥‥ E-16
Canceling copy operations ‥‥‥‥ E-18
Formatting ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-18
Formatting P2 cards ‥‥‥‥‥‥‥ E-18
Formatting the HDD ‥‥‥‥‥‥‥ E-19
Auto power OFF during use ‥‥‥‥E-19
Using the AJ-PCS060G
Connecting to a computer ‥‥‥‥‥‥E-20
Overview of dedicated software
‥‥‥‥E-22
Starting and closing P2Store Manager
‥‥‥‥E-23
P2Store Manager screens ‥‥‥‥‥‥E-24
HDD page‥‥‥‥‥‥‥‥‥‥‥‥ E-24
S.M.A.R.T page ‥‥‥‥‥‥‥‥‥ E-26
Setup page ‥‥‥‥‥‥‥‥‥‥‥ E-27
Upgrade page ‥‥‥‥‥‥‥‥‥‥ E-28
Updating procedure ‥‥‥‥‥‥‥ E-29
Connecting to a Computer
ERROR LED display ‥‥‥‥‥‥‥‥‥‥E-30
Troubleshooting ‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-33
Specifications ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥E-34
Troubleshooting and Reference
• Microsoft and the Microsoft logo, Windows are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
• Apple, Macintosh, and the respective logos are registered trademarks or trademarks of Apple
Computer, Inc. in the United States and other countries.
• Intel and Pentium are registered trademarks or trademarks of Intel Corporation in the United States and
other countries.
• Other product names or corporate names in this manual are either trademarks or registered trademarks
of their respective owners. In this manual, the trademark symbol ™ and registered symbol ®are
omitted.

E-7
Overview
1) Shock Resistance
• If a disk operation (such as copying) is in progress when the sensor detects that the unit
is hit or dropped, the hard drive head is automatically parked to protect the disk and data.
• The hard disk is also protected by impact-absorbing materials. However, no guarantee
against damage or data loss is implied.
The AJ-PCS060G is a dedicated portable hard disk unit for AJ-P2C series P2 memory cards. It
features a USB 2.0 (Type B) interface for data transfer with a computer.
Data from P2 camera-recorders can easily be copied to the 60 GB internal hard disk.
Options
• Battery pack CGR-D16 (1600/1560 (typ./min.) mAh)
CGA-D54 (5400 mAh)
• AC adapter AG-B25
Features
• Accepts one P2 card
• Internal 2.5 inch 60 GB hard disk
• Improved shock resistance from an acceleration sensor and protective materials around the
hard disk 1)
• High-speed copying of P2 card data directly to the hard disk
• Fast data transfer to a computer via the USB 2.0 cable
Included accessories
• Install Manual ..............................................................................................................................1
• Ferrite core ..................................................................................................................................1
• CD-ROM
[Includes P2 Driver, P2 Card Manager,
Install Manual and Operating Instructions (this manual)]......................................................1

E-8
ENGLISH
For better performance
The unit’s internal hard disk is protected by materials to withstand impact or drops better.
However, please understand that no guarantee against damage or data loss is implied.
AJ-PCS060G
The unit houses a hard disk drive (“HDD”).
Take the following precautions during setup and use to protect the HDD and data stored on it
from data loss or interrupted operation.
The HDD is a high-precision device. Operating conditions may pose a risk of partial damage,
and in a worst-case scenario, there is a serious risk that data cannot be read or recorded.
Thus, please do not consider the internal HDD a permanent storage place for data. Use it as a
temporary storage device until you can back up data on other storage media.
•Do not subject the unit to vibration or impact during use. (Otherwise, the HDD may be
damaged.)
•Do not use the unit where vibration occurs or put it on unstable surfaces.
•Do not use it in enclosed areas without air circulation, where operating heat cannot be
dissipated.
•Do not subject it to extreme changes in temperature.
→Using the unit where the temperature changes suddenly poses a risk of condensation. Using
the unit with internal condensation may damage the HDD. Ensure a fairly constant room
temperature, where any temperature changes occur at less than 20 °C (68 °F) per hour.
•Do not use the unit in extremely humid places.
•Do not remove the battery pack or unplug the AC adapter when the power is on.
•Before transferring the unit elsewhere, always turn the unit OFF by holding the [POWER] button
for at least 2 seconds and waiting for it to finish shutting down.
Wait until it has stopped moving completely (about 2 minutes), and protect it from vibration and
impact in transit. (After turned OFF, the HDD will continue spinning from inertia for a while.)
•Do not use the unit at altitudes lower than –90 m (–300 feet or lower), or higher than 3,000 m
(10,000 feet or higher) above sea level.
As optional accessories, use a recommended battery pack and AC adapter.
Hard disk
Recorded data
If the HDD is damaged, data recorded on it will be lost. Always keep an extra copy of important
data on separate storage media. See page E-22 for instructions on backing up data.
Erasure of HDD data before disposal or transference of the unit
When you dispose of the unit or transfer it, we urge you to take responsibility for erasing any
important data on the HDD. This will avoid any problems from leaked information.
Dispose of the HDD after bringing it near a strong magnetic field and breaking it with a
hammer or other means to make it unreadable.
Note that Panasonic cannot be liable for data lost from HDD failure or other problems, or
for other direct or indirect loss.

E-9
For better performance (continued)
Never clean the unit with solvents such as benzene, thinner, or alcohol
• Before cleaning, remove the battery pack or unplug the AC adapter.
• Cleaning the unit with solvents may damage the outer case or cause the paint to peel.
• Use a clean, soft dry cloth to wipe away dust or dirt. If the unit becomes quite dirty, wipe it with
a cloth dampened in diluted neutral detergent after wringing the cloth well. Use a dry cloth to
wipe it dry.
• If you use a chemically treated dust cloth, follow the precautions for use.
Use the optional AC adapter (AG-B25).
Read the user’s manuals of all accessories carefully
before use.
Note:
When using an AC adapter, attach the included ferrite core
near the base of the battery-type connector on the DC cable
connected to the unit. Be sure to wind the cable around the
ferrite core twice, as shown, at time of attachment.
If you do not use the ferrite core, other devices may be
affected by the unit.
AC adapter
Cleaning
The unit’s internal hard disk drive (HDD) is a high-performance part that is subject to
maintenance.
To keep the unit in optimal condition, we recommend that you inspect it regularly and bring it to
the place of purchase for periodic maintenance.
Ask your dealer for further details about periodic maintenance.
Request periodic maintenance under this guideline. See page E-25 for instructions on checking
the operating time.
Tips:
• In some cases, the content of the HDD is cleared during maintenance, so any data will be lost.
Before maintenance, always back up needed data on separate storage media.
Please understand that you will not be compensated for lost data.
• You will not be compensated for data stored on the HDD in the case of HDD failure. Lost data cannot be
recovered.
The HDD is for temporary storage of data, and we recommend backing up needed data promptly.
Every 2,000 hours of use
Maintenance
Use the optional Battery pack.
Read the user's manuals of all accessories carefully before use.
Battery pack
Battery-type connector
on the DC cable
Ferrite core
Wind twice
around and
close it

E-10
ENGLISH
Control reference guide
Front
POWER button
Use this button to turn the unit ON and OFF.
When the unit is OFF, simply press the
[POWER] button to turn it ON. When ON, hold
the [POWER] button for at least two seconds
to turn it OFF.
POWER LED
Lights when the unit is ON.
The POWER LED flashes during startup or
shutdown.
P2C button
Press to format P2 cards. After copying data to
the HDD, you can format the P2 card as
needed. (See page E-18)
Note:
Data cannot be recovered after formatting.
Before formatting cards, make sure all the
data may safely be deleted.
HDD button
Press to format the internal HDD. All unneeded
data on the HDD can be deleted at once.
(See page E-19)
Note:
Data cannot be recovered after formatting.
Before formatting the HDD, make sure all the
data may safely be deleted.
P2C LED
Lights or flashes when the unit is accessing a
P2 card.
(See pages E-16, E-18 and E-29)
HDD LED
Lights or flashes when the unit is accessing the
internal HDD.
(See pages E-16, E-19 and E-29)
ERROR LED
Lights or flashes if errors occur.
Errors are identified by the combination of
[COPY STATUS] LEDs on the front and [E1 to
E4], [P2C], and [HDD] LEDs on the top.
(See pages E-15 and E-30 to E-32)
P2 card slot
A dedicated slot for P2 cards. Before inserting a
P2 card, make sure the EJECT button is in.
Hold the card level as you insert it.
Never insert anything in the slot except P2
cards.
EJECT button
Press to eject P2 cards from the slot.
(See page E-13)
COPY STATUS LEDs
Indicates the progress of copying or formatting.
(See pages E-16, E-18, E-19, E-29 and E-32)

E-11
Control reference guide (continued)
Top
START button
Press to start copying or formatting.
Hold the [START] button for at least 2 seconds
to start either process.
CANCEL button
Press to cancel copying.
During copying, hold the [CANCEL] button for at
least 2 seconds to cancel copying.
Sliding knob
To open the front panel cover, slide the knob in
the direction of the arrow.
Battery level indicator button []
After this button is pressed, the remaining power
level of the battery pack will be displayed for
about 2 seconds in , the [REMAIN] indicator.
(See page E-15)
The [USB] indicator remains lit (green) as long
as a USB 2.0 cable is connected.
HDD capacity indicator button [HDD
CAP]
After this button is pressed, the available HDD
capacity will be displayed for about 2 seconds in
, the [REMAIN] indicator.
The number in [REMAIN] represents how many
cards can be copied to the HDD.
(See page E-14)
The [USB] indicator remains lit (green) as long
as a USB 2.0 cable is connected.
Battery/HDD indicator and error LEDs
[REMAIN]
Indicates the remaining battery level, available
HDD capacity, and, if errors occur, error
identification.
(See pages E-14, E-15, E-30 to E-32)
USB 2.0 connector (Type B)
Attach the USB 2.0 cable to this connector when
connecting the unit to a computer or P2 device
that can serve as a USB host.
Note:
Computers used with the unit must support
USB 2.0.
Right side

E-12
ENGLISH
Control reference guide (continued)
Left side
Back
Sliding switch cover
Sliding switch
Slide toward the front to enable software
updates.
Normally, keep the switch toward the back.
(See page E-29)
Power inlet
Insert an optional battery pack or AC adapter
here.
DC IN socket (7.9 V)
Battery lock release button
When removing optional battery packs or AC
adapters, hold down the button as you slide it
toward the button side.
VERIFY switch
Use this switch to verify data after it has been
copied from P2 cards onto the internal HDD.
(See page E-16)
ON : Verify
OFF: Do not verify
Note:
To ensure accurate copying, slide the
VERIFY switch to ON. If it is set to OFF, the
unit may not be able to copy correctly in some
cases. However, note that copying will take
twice as long with verification (when ON) than
without (when OFF).
Rear panel
side
Front panel
side

E-13
Copying
When inserting a P2 card in the card slot, always hold the
card level and insert it carefully.
Forcing cards in the slot at an angle may damage them
or the unit.
Do not eject P2 cards during access by the unit (when the [P2C] LED is lit). The data may be
lost or the P2 card damaged.
Use an optional battery pack or AC adapter as the power source. (See page E-7)
In either case, make sure the power source is firmly connected to the unit.
For connection instructions, refer to the user's manual of the accessory. Turn the unit ON before
all operations. When finished (and when the unit is not in use), turn the unit OFF.
Power ON
To turn the unit ON, press the [POWER] button. The POWER LED flashes during startup. When
the unit is ready for use, it remains lit (green).
Note:
•
When a low voltage error occurs (when [ERROR] LED lights in red and [E2] in [REMAIN] flashes in red),
either replace the battery pack with a recharged one or switch to the AC adapter and restart the unit.
•When the temperature of the built-in HDD falls below the specified temperature (when [ERROR] LED
lights in red, and [E1] lights and [E2] flashes in red in [REMAIN]), the unit warms up to the specified
temperature. During warm-up, the [START] button and other controls are temporarily disabled.
•
More power is consumed during warm-up. In some cases a low-voltage error may occur afterwards,
depending on the remaining level of the battery pack. If this occurs, turn the power OFF and then ON again.
Power OFF
To turn the unit OFF, hold the [POWER] button for at least 2 seconds.
The POWER LED goes out. Note that during shutdown, this LED flashes.
Turning the unit ON and OFF
To eject a card, press the EJECT button once, and after the button comes out, press it again.
Note:
If the unit is connected to a computer, wait until shutdown processing for the card is complete before
pressing the EJECT button.
•For Windows:
1. Go to [Start] →[My Computer]
2. Right-click on the P2 card drive (displayed as a removable disk) and select “Eject”
3. Press the EJECT button and remove the P2 card
•For Macintosh:
Select the P2 card volume displayed on the desktop. From the menu bar at the top of the screen, select
[File] →[Eject], or otherwise drag the volume to the trash.
Ejecting P2 cards
Inserting P2 cards

E-14
ENGLISH
Capacity
(No. of cards that
can be copied)
Write-protect switch settings
：Data cannot be written to or deleted from
the card.
：Data may be written to or deleted from
the card.
PROTECT
PROTECT
Copying (continued)
Up to 15 P2 cards worth of data can be copied to the unit's internal HDD. (However, in the case
of 8 GB P2 cards, the data on only 7 P2 cards can be copied.) To see how much space is
available on the HDD (how many cards can be copied), press the [HDD CAP] button and check
the [REMAIN] indicator.
See【HDD Capacity (in Number of Cards)】.
With the unit ON, check how many P2 cards can be copied
Press the [HDD CAP] button the number of times indicated (Press count) in [HDD Capacity (Settings)]
below. This will depend on the type of P2 card inserted.
The [REMAIN] LED will light in orange for a second and then the display will change to that
shown in [HDD Capacity (in Number of Cards)] below.
The [REMAIN] indicator goes out after about 2 seconds.
When P2 cards are inserted, the following operations will be prevented to protect the data, even if
you adjust the write-protect switch. Thus, check the write-protect switch before inserting P2
cards.
Write-protection on P2 cards
HDD capacity indicator
REMAIN
R
G
G
G
G
G
0
2
1
3
4
5 or more
Full useable
(when the cards are not in use)
R
G
G
G
G
R
G
G
G
R
G
G
R
G G G G G
G
: LED lit : LED flashing R : red G : green
P2 card type
REMAIN
OR
OR
OR
2 GB/4 GB
3
2OR
OR OR
1
8 GB
16 GB
Press
count
【HDD Capacity (in Number of Cards)】
【HDD Capacity (Settings)】
: LED lit OR : orange

E-15
Copying (continued)
When using an optional battery pack, you can check the remaining level. You can see how much
power is left by pressing the [ ] button and checking the [REMAIN] indicator. See【Battery
level】, below.
Copy operations are not possible in the following states.
•Low power error (The [ERROR] LED lights in red and the [E2] in [REMAIN] flashes in red.)
•Low battery pack charge error (detected when copying P2 cards of capacity 16 GB or higher)
(The [ERROR] LED lights in red and the [E2] in [REMAIN] lights in red.)
Once the level reaches 0 (zero), an error is displayed as described in【Battery level】and the
unit goes OFF immediately. Switch to another optional battery pack that is fully charged or use
an optional AC adapter.
With the unit ON, press the []button
The display will correspond to【Battery level】, below.
【Battery level】
The [REMAIN] indicator goes out after about 2 seconds.
Note:
With an AC adapter, in some cases the LED display may not indicate 100. This is not a problem.
Battery level indicator
: LED lit , : LED flashing R : red G : green
REMAIN
Battery pack
level
G
G
G
G
R
R
100
0
G
G
G
G
R
G
G
G
R
G
G
R
G
R
G
R

E-16
ENGLISH
Copying (continued)
: LED lit ,, :
LED flashing G : green OR : orange
4. Make sure all the [COPY STATUS] LEDs are lit in green
5. Press the [POWER] button
Copying is complete and the [COPY STATUS] LEDs go out.
Note:
•Once the data on a P2 card has been copied to the HDD, it cannot be copied to the HDD again. If this is
the case, one of the following operations will be performed depending on the [VERIFY] switch setting.
[VERIFY] switch is OFF: Even when step 3 is taken, 100% is immediately displayed as the copying
progress status.
[VERIFY] switch is ON: When step 3 has been taken, the data is not copied, 40-59% is displayed as
the copying progress status, and the verification is conducted.
•Even after data on a P2 card has been edited, added or deleted by a computer or other device, it may be
recognized as the same data. If this is the case, one of the following operations will be performed
depending on the [VERIFY] switch setting.
[VERIFY] switch is OFF: Even when step 3 is taken, 100% is immediately displayed as the copying
progress status.
[VERIFY] switch is ON: When step 3 has been taken, the data is not copied, 40-59% is displayed as
the copying progress status, the verification is conducted, the data is
recognized as different, and operation ends with the Verify NG error 2). (See
page E-32)
Progress (%)
COPY STATUS
00-19
20-39
40-59
60-79
80-99
100
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
During
access
OR
During
access
OR
High-speed copying from P2 cards to the HDD is possible because data is transferred directly to
the HDD.
Do not turn the unit OFF or eject P2 cards when the [P2C] or [HDD] LEDs are lit.
Copying from P2 cards to the HDD
1. With the unit ON, insert a P2 card in the slot
2. Press the [HDD CAP] button and make sure there is enough space to copy at least one
card
If the capacity (in number of cards) is 0, copy needed data to other storage media and format
the HDD. (See page E-14 and E-19)
3. Hold the [START] button for at least 2 seconds
Copying begins, and the verification 1) is conducted (when the [VERIFY] switch is set to ON).
The copying progress is indicated by the LEDs, as follows.
When using an optional battery pack, check the remaining level before copying data.
Copy operations are not possible in the following states.
•Low power error (The [ERROR] LED lights in red and the [E2] in [REMAIN] flashes in red.)
•Low battery pack charge error (detected when copying P2 cards of capacity 16 GB or higher)
(The [ERROR] LED lights in red and the [E2] in [REMAIN] lights in red.)
Replace with a fully charged, optional battery pack or switch to the use of an optional AC adaptor.
(Continued on next page)

Copying (continued)
E-17
•If the unit heats up during copying, it will automatically copy at a slower rate. The [P2C] and [HDD] LEDs
also flash slowly at this time.
•
If copying is not completed normally (if the unit is turned OFF or the P2 card is pulled out during copying), the HDD
capacity (number of cards that can be copied) is decreased by as many P2 cards that could not be copied.
•All [COPY STATUS] LEDs flash in green if a blank P2 card is inserted and step 3 above is finished.
•In the case of P2 cards that include a Bad clip 3), be sure to first restore any lost data using a P2 camera-
recorder or other device before copying using this unit. When a defective clip is copied without correcting
its defects, it may not be possible to repair the copied defective clip.
1) This function conducts the verify whether the data on P2 cards and the data recorded on the internal
HDD are the same.
2) When the Verify NG error has occurred, “ERROR”appears in the status column of the HDD partition
information section (see page E-24). If this is the case, the data on the P2 card concerned can be copied
again, but the partition with the “ERROR”status will remain unchanged.
3) Improperly recorded clip due to accidental removal of the P2 card or sudden power loss during recording.
Clips with a yellow marker displayed on the thumbnail screen when using a P2 camera-recorder or
similar device.
X

E-18
ENGLISH
Formatting
You can delete all data on P2 cards.
3. Within 2 seconds, press the [START] button
The [COPY STATUS], [P2C], and [HDD] LEDs go out, and P2 card formatting begins.
Formatting is complete when the [P2C] LED flashes in orange.
Note:
While the [COPY STATUS], [P2C], and [HDD] LEDs are on in step 2, if you do not press the [START]
button within 2 seconds (step 3), the P2 card will not be formatted. To format the card, repeat the
process from step 2.
Formatting P2 cards
Data cannot be recovered after formatting. Before formatting cards, make sure all the data may
safely be deleted.
Do not turn the unit OFF or eject P2 cards when the [P2C] LED is flashing.
This may damage the P2 card.
P2 cards cannot be formatted if the write-protect switch is set to PROTECT. Additionally, when P2
cards are inserted in the slot, you cannot adjust the write-protect switch to prepare them for formatting.
1. With the unit ON, insert a P2 card in the slot
2. Hold the [P2C] button for at least 2 seconds
The [COPY STATUS], [P2C], and [HDD] LEDs change as follows.
: LED lit : LED flashing OR : orange
COPY STATUS
OR OR OR OR OR OR
−
: LED lit OR : orange
You can cancel copying in progress as follows.
1. Hold the [CANCEL] button for at least 2 seconds
The [COPY STATUS], [P2C], and [HDD] LEDs change as follows.
2. Press the [POWER] button
Copying is canceled and the [COPY STATUS] LEDs go out.
Note:
Canceling copy automatically deletes copied data.
Canceling copy operations
COPY STATUS
OR OR OR OR OR − −
Copying (continued)

E-19
Formatting (continued)
Auto power OFF during use
If left unused, the unit will automatically turn OFF after ten minutes if no copying or formatting
operations are in progress. To use the unit, turn it ON again.
If the unit is left unused while connected to a computer via the USB 2.0 cable, auto power OFF
is deactivated, even if no copying or formatting is in progress. To turn the unit OFF, hold the
[POWER] button for at least 2 seconds.
Note that auto power OFF is disabled while waiting for an error check after an error has
occurred or when copying has ended.
Note:
You can set the time until auto power OFF on the P2Store Manager Setup page, in “Auto power off
mode.”
Options: [Never], [5 min], [10 min], [15 min], [20 min], [25 min], and [30 min]. Default: [10 min]. (See page
E-27)
2. Within 2 seconds, press the [START] button
The [COPY STATUS], [P2C], and [HDD] LEDs go out, and HDD formatting begins. Formatting
is complete when the [HDD] LED flashes in orange.
Note:
•While the [COPY STATUS], [P2C], and [HDD] LEDs are on in step 1, if you do not press the [START]
button within 2 seconds (step 2), the internal HDD will not be formatted.
To format the HDD, repeat the process from step 1.
•15 partitions are created automatically on the internal HDD.
Formatting the HDD
: LED lit : LED flashing OR : orange
You can delete all data copied onto the internal HDD.
Put the unit on a solid surface before formatting the HDD.
Vibration or impact may damage the unit during formatting.
Data cannot be recovered after formatting. Before formatting the HDD, make sure all the data
may safely be deleted.
Do not turn the unit OFF when the [HDD] LED is lit.
1. With the unit ON, hold the [HDD] button for at least 2 seconds
The [COPY STATUS] LED, [P2C] LED, and [HDD] LED change as follows.
COPY STATUS
OR OR OR OR OR −OR