Panasonic FZ-X1AFAB Wiring diagram

Operating I nstructions
Smart Handheld
EB-3901
Tablet Computer
Model No. FZ-X1AFAB
FZ-X1CFAB
FZ-E1BFCB
FZ-E1DFCB series
Supplementary instructions for explosion-proof models ......... 2
Ergänzende Anweisungen für explosionsgeschützte Ausführungen ... 16
Instructions supplémentaires pour les modèles antidéflagrants ... 30
Istruzioni supplementari per modelli a prova di esplosione ... 44
Instrucciones adicionales para modelos a prueba de explosión ... 58
Lisäohjeet räjähdyssuojatuille malleille ................................. 72
Kompletterande anvisningar för explosionssäkra modeller ... 86
Doplňkové pokyny k modelům odolným proti výbuchu .........100
Doplňujúce pokyny pre odolné modely do výbušných prostredí ...114
Informacje uzupełniające dla modeli w wykonaniu przeciwwybuchowym ...128
Instruções suplementares para modelos à prova de explosão ...142

2
Supplementary instructions for
explosion-proof models
Thank you for purchasing a Panasonic product.
• This product is intended for use in non-hazardous or hazardous
location classified as EPL Gc, Zone 2.
• This product is specified Temperature class T4.
• Models FZ-X1AFAB / FZ-X1CFAB / FZ-E1BFCB / FZ-E1DFCB
have a high frequency power greater than 2 W but less than 3.5 W,
and are suitable only for Gas Groups IIA and IIB.
Note
• For detailed information about “Temperature class” or “Gas
Groups”, refer to EN 60079-0.
Please read this document and the unit’s Operating Instructions
carefully before using the product and keep this document in a safe
place for future reference.
Please confirm the warranty period of this product in the Operating
Instructions.
ATEX Information
ATEX Certificate of Conformity no.: CML 15 ATEX 4069X
Ex-Marking: II 3G Ex nA nC IIB T4 Gc
Ambient temperature: -20 °C to 40 °C
IP of degree: IP54
Confirms to EN 60079-0 & 60079-15

3Supplementary instructions for explosion-proof models
Safety precautions
Explanation of symbol word panels
The following symbol word panels are used to classify and describe
the level of hazard, injury, and property damage caused when the
denotation is disregarded and improper use is performed.
The following symbols are used to classify and describe the type of
instructions to be observed.
1. The area in which the product may or may not be taken.
Safety precautions
Denotes potential hazards that could
result in serious injury or death.
This symbol is used to alert users to specific operating
procedures that must not be performed.
This symbol is used to alert users to specific operating
procedures that must be followed in order to operate the
product safely.
May result in explosion or fire.
DO NOT enter Zone 1, Zone 0 with this equipment.
DO NOT use in underground mining or the like.
DO NOT use in potential explosive dust atmosphere
of any classification or zone.
This product can be used in areas where
noncombustible dust and nonconductive dust may be
present.
WARNING
WARNING

4
2. The use of the leather case and the avoidance of electrostatic
charging.
Check the possible atmospheric conditions against
the classified EPL, Zone and temperature class of
this product.
The use of this product is limited. Due to its technical
characteristics it cannot be used with every possible
potential explosive.
May result in explosion or fire.
Cover this product with the included leather case to
provide mechanical and electrostatic protection
when carrying or using in a hazardous area.
Wear conductive shoes and conductive gloves (if
gloves are necessary) when carrying this product.
DO NOT rub this product with dry and/or synthetic
fiber textile fabric.
DO NOT use this product with the protective film
removed from the LCD screen surface or with an
unauthorized film applied on the LCD screen
surface.
DO NOT damage the surface coating of LCD and do
not remove the LCD protective film.
DO NOT place this product near an electrostatically
charged object or an object capable of carrying a
static charge.
WARNING

5Supplementary instructions for explosion-proof models
3. The sort of connection and components that may or may not be
used and when.
4. Battery charging and replacing.
May result in explosion or fire.
DO NOT connect or disconnect any external devices
or accessories to this product (e.g. micro USB port,
DC input jack, headset jack, expansion bus
connector) unless the surrounding area is known to
be non-hazardous.
May result in explosion or fire.
DO NOT charge the battery in a hazardous area.
DO NOT remove or install the battery in a hazardous
area.
Use the specified AC adaptor or cradle for charging
in a non-hazardous area.
See the Operating Instructions.
Use the specified battery for this product.
See the Operating Instructions.
WARNING
WARNING

6
5. The checking and maintenance of the product.
May result in explosion or fire.
DO NOT repair or disassemble this product.
DO NOT take this product into hazardous area if a
problem is found.
Before taking this product into hazardous area,
follow the inspection procedures described below.
• The enclosure including display shall be checked
for damages.
• Make sure that there is no damage, crack, wear
and tear in all connector covers and gasket.
• Make sure no screws are missing.
• Make sure that there are no holes or damage in
the leather case.
• Make sure that the caution labels in this product
and leather case are not peeled off.
• Turn on this product and make sure that there is
no spark, smoke, smell, strange noise.
• Make sure that there is no other damage, wear
and tear or operational malfunctioning.
• Make sure all connector covers are closed.
• Make sure the interface cover and the battery
cover are locked.
• Before any use, the display and all the jack and
port covers shall be checked for damages and be
closed.
Contact your technical support. Please refer the
Operating Instructions.
WARNING

7Supplementary instructions for explosion-proof models
6. The conditions for use and protection of the product.
May result in explosion or fire.
DO NOT permanently install in hazardous area.
This product is portable equipment.
DO NOT place the product where it can be subjected
to shock or vibration.
DO NOT leave the product exposed to direct
sunlight or UV light.
DO NOT leave the product exposed to frequent
temperature changes.
DO NOT use in areas with small particles in an air
stream, solvent vapors, and the like.
Protect from mechanical impacts.
Especially protect the display from mechanical impact if
the display protection cover is opened.
If this product is dropped, it should be immediately
removed from the hazardous area, and be checked
for any damage referring to “5.” above.
If damages or malfunction occur, the equipment
must be removed from the hazardous area.
If the product shuts down due to overheating, leave
the classified zone and let the product cool down.
WARNING

8
Model differences as written in the Operating Instructions and
Reference Manual of the product
• Operating temperature of this model is -20 °C to 40 °C.
• IP of degree is IP54.
This product is designed for use in the following countries.
AT BE BG CH CY CZ DE DK EE ES FI FR GB GR HR HU IE IS IT
LT LU LV MT NL NO PL PT RO SE SI SK TR

9Supplementary instructions for explosion-proof models
Precautions for using the leather case
• The product cannot be mounted on the cradle as long as the
leather case is attached.
• Do not store in high temperatures and humidity to prevent mold.
• Do not store in extremely hot and/or dry place to prevent shrinkage
and/or deformation.
• Do not leave the leather case in the car exposed to direct sunlight.
• Store in a cool, dry, and well-ventilated places free from dust or
chemical products.
• Protect the leather case from rain and other sources of moisture to
prevent shrinkage and/or deformation. If the case gets wet,
remove it from the product in a non-hazardous area, dab it with a
soft cloth, and dry it in the shade.
• Moisture may cause insect infestation, blistering, and
discoloration.
• To clean, use a slightly moistened cloth and wipe. Do not use
alcohol, benzene, or thinner.
• When using the leather case, keep the following points in mind.
• Do not apply strong force to the seams.
• Do not put labels or stickers on the leather case.
• Since the leather case is delicate, do not strike or rub it with a
hard object.
• Natural leather is used in this product, so the color may fade or
change.
• When mounting to or removing the leather case from the product,
place a cloth under the leather case to prevent damage to the
leather case.
• When the LCD protective film needs to be replaced, contact
Panasonic Technical Support.
• Product appearance may be subject to change without notice.
Precautions for using the leather case

10
Using the leather case
Installing the leather case
When the leather case is removed, install it according to the following
procedure.
Leather case set
Preparation
• Before installing the leather case, always make sure the interface
cover is securely closed and locked.
Failing to close the interface cover when installing the case may
cause damage to the leather case and the interface cover.
• Make sure there are no foreign objects on the bottom of the unit.
1. Turn over the unit.
2. Unfasten the flaps at the bottom of the case (A, B).
Using the leather case
Leather case front Leather case rear
A
B