Panasonic KX-DT 333 Series User manual







Panasonic User Guide
(Panasonic KX-DT 333/343 Series Phones)







Page 2of 5
573-874-0101
______________ _
DISPLAY FEATURES: (4 “soft” keys)
PROG Used to program keys RING Volume of the Ring Tone
INFO Date/Time/Day of Week MENU Personal/System/ Extension Directories,
Extension /Name or Incoming/ Outgoing Call Logs,
Day/Night Mode Feature Access Programming
______________ _
4-WAY NAVIGATION KEY:
Up/Down Adjust volume while on a call (both handset & speaker)
Change the volume of your ringer.
Left/Right Call Logs, Personal/System/Extension Directories, Feature Access
______________ _
12 FIXED KEYS:
CONF Conference calls together (maximum of 8 parties)
FWD/DND Forward your phone to an external number or to another extension.
Do Not Disturb can be set for internal calls, external calls or both.
This button can toggle between FWD/DND/OFF
PAUSE Used for programming or to insert a pause when storing numbers.
INTERCOM Internal calls. Press Intercom button + Extension number or 1-touch
AUTO ANS/MUTE Auto Answer: If engaged it will answer intercom calls hands free
Mute: Used to mute the microphone of your speaker or your handset
during a phone call
AUTO DIAL/STORE Used for System and Personal speed dialing or for storing
program changes

Page 3of 5
573-874-0101
MESSAGE Used to leave a message waiting indication lamp or call back the
person that left you a message internally. Message waiting is indicated
by a solid red light on the top right corner of your phone.
REDIAL Redial the last number called
TRANSFER Used to transfer a call to another internal extension
FLASH/RECALL Used to disconnect the current call and make another without
hanging up. Also used as a CANCEL button while on-hook.
HOLD Used to place a call on hold
SP-PHONE The speakerphone is used for hands free operations
______________ _
Ring Tones: (30 to choose from)
To Program:
Press
PAUSE
Press the Line or INTERCOM 2 times
Use up/ down arrows on navigation key to listen to the tones (or press 01 – 30)
Press
Enter to store the ring
______________ _
To Make an External Call:
Press open line button or dial the line access code (generally “9”), dial telephone number
To Make an Internal Call:
Lift handset or Press SP-PHONE . Dial the desired extension number or press the one
touch button. (NOTE: must be on INTERCOM )
To Park a Call:
With the caller on the line press TRANSFER , Call Park key (or *52) + the 2-digit zone in
which to park the call (00-99) or hit * for the system to assign anidle zone.
To retrieve Parked Call:
Press the Call Park feature key (or *52) + the 2-digit parking zone.
To Transfer a Call:
With the caller on the line press TRANSFER , then dial the extension you need or
press the one touch extension button. Announce the call (optional) and hang up.
To set Call Forward / DND (for both internal & external calls):
Fwd: Press *7102+ location DND: Press *7101

Page 4of 5
573-874-0101
To Place a Call on Hold:
With the caller on the line press HOLD .The active outside line button flashes green.
Press the HOLD button twice for exclusive hold.
To retrieve a call on hold:
A call that is holding on your extension will flash green. A call holding on another
extension will flash red. Press the line that you would like to pick up. (lamp will turn
solid green.
To pick up a call that is ringing on another extension (directed call pick-up)
Press *41 + extension number of ringing phone.
To make a conference call: (maximum 8 parties)
While on a call, press CONF , make 2nd call, press CONF , etc
Personal Speed Dial (00-09)
To Program: Lift handset. Press * 3 0 , then enter the desired 2-digit code (00-09),
enter the line access code (generally “9”) followed by the telephone number, then #
To Use: Lift handset. Press AUTO DIAL/STORE * plus the 2-digit code (00-09).
To Use System speed Dial: Lift handset. Press AUTO DIAL/STORE plus 3-digit (000 - 999)
______________ _
Programming your phone for One Touch Dialing:
STEP 1:
Press PAUSE or PROG (soft key)
Press the One Touch button that you would like to program
Press CLEAR (soft key) to erase any previous programming
STEP 2:
To Program a Speed Dial Number:
Dial the Line Access Code (generally “9”) followed by the phone number
OR
To Program a Feature Button:
Press the feature code (if you do not know the code then simply press the SP-PHONE
button to scroll through the features.
OR
To Program an Extension:
Press SP-PHONE (display shows “EXT-“) enter the extension number and press ENTER
STEP 3:
Press AUTO DIAL/STORE or Enter (soft key)
Press PAUSE or Exit (soft key)

Page 5of 5
573-874-0101
______________ _
Setting up and using Voicemail
Logging into your voicemail box:
Press Open VM, enter your password followed by # and follow the prompts.
QUICK REFERENCE:
Receive message: 1 Deliver message: 2 Mailbox Management: 3
Listen to new messages: 1 Skip greeting: 2 Delete msg: 3
Listen to saved messages: 2 Fwd copy of msg: 7 Envelope information: 23
Access your mailbox administration (this allows you to change your Greetings, Password, Name, etc)
Login to your mailbox (see above)
Press 3 to enter Mailbox Management
Next step:
Press 1 to change the personal greeting. (This is the message that the caller will hear
when they reach your mailbox) Then press 1 to record your no answer
greeting (this is the only greeting you really need to record). To record
a temporary greeting Press 5
Press 2 to change your Password
Press 3 to change your Name for the directory
Follow the prompts after each selection to ensure that you save the new info that you enter.
To access voicemail remotely:
From another phone on your system, Press Open VM OR
From outside your system, call a phone number connected to your system.
When your Automated Attendant answers, enter # 6 * and your mailbox number
Then enter your password followed by #.
You are now in your mailbox. Follow the mailbox prompts as normal
How to set up message notification:
Login to your voicemail box. (see above)
Press 5 to set up messaging waiting notification.
Press 3 to add or change the phone or pager number to be notified for message waiting.
(Be sure to enter the line access code (generally “9”) in front of the phone number)
Follow prompts.
______________ _